Aetheric Bioelectrical Polymeric-Matrix: A Molecular Resonance Material

Well Aware 1 - DallasGoldBug - Real Truth Exposed!

2012-01-07T20:48:00.000-08:00

Nazi War Criminals Control USA and Israel

Want Know More?
WellAware1.com - The Power of 1

bobsizzz's Channel - YouTube

The Truth EXPOSED pt 2c.flv - YouTube

Who is Lady GAGA? and more..........

Layers of Limestone: Water Flow within Creates Electric Charge

2011-03-02T04:11:00.001-08:00

YouTube Video

Layers of Limestone: Water Flow within Creates Electric Charge

YouTube - The Pyramid Code - Ep 2 - High Level Technology part 3/5

Tesla and Pyramid Connection

YouTube - The Pyramid Code - Ep 2 - High Level Technology part 4/5

Earthquake Lights: Rocks that Crackle and Sparkle and Glow

2011-03-02T04:08:00.001-08:00

— Strange Pre-Earthquake Phenomena —

http://www.isfep.com/FF_EQ_SSE_2003.pdf

Igneous and metamorphic rocks, which make up a major portion of the Earth s crust, contain electric charge carriers, which have been overlooked in the past. These charge carriers are defect electrons in the valence band, i.e., positive holes. Under normal conditions they are dormant, but when they wake up , the rocks begin to sparkle and glow . This paper describes the physical and chemical nature of these positive holes, how they are introduced into minerals and rocks, and how they become activated. Evidence will be presented that, once the positive holes are generated, currents propagate through the rocks leading to electromagnetic emission, to positive surface potentials, to corona discharges, to positive ion emission, and to mid-infrared radiation. These phenomena are expressions of the same fundamental process: the awakening of dormant positive hole char ge carriers that turn rocks momentarily into p-type semiconductors.

Electrical Conductivity of Rocks
At this point it is advisable to revisit the question of electrical conductivity of minerals and rocks.
Oxide and silicate minerals that make up the bulk of the igneous and high-grade metamorphic rocks in the Earth s crust are mostly good insulators. Except for sulfide minerals, which are often quite conductive, the only oxide mineral that shows an appreciable electronic conductivity is magnetite,
Fe3O4. In magnetite, Fe2+ and Fe3+ alternate on neighboring sites, allowing for Fe2+/Fe3+ valency fluctuations to delocalize over the cation sublattice and to thus conduct electricity (Stacey and Johnston 1972; Dieckmann 1986). All other rock-forming minerals, including silicate minerals that are rich in transition metals in different oxidation states, are non-conductors. If the minerals do not conduct electricity, the rocks, which they form, must also be considered good insulators, at least as long as they are dry.

There is yet another point that deserves attention. Because p-holes represent defect electrons in the valence band of O 2p-dominated oxide/silicate insulators, they propagate through the valence band. This, however, means that they will be able to spread from any place where they are generated to portions of the sample where they are not actively produced. It means that they will flow from one oxide/silicate material to the next. The only requirement is that there is a continuous path of grain- grain contacts along which the valence bands are connected. In some way, the propagation of p- holes through an insulator or an ensemble of mineral grains in a rock resembles the propagation of electrons through metal or through different pieces of metal that are in electric contact.

These hopeful words should not hide the fact that, until now, the geoscience community at large has not accepted the notion that p-holes exist in minerals and rocks, and that they may have a profound effect on many properties of these materials and on processes of general geological and geophysical interest. There are several causes for the widespread resistance.

Published information about p-holes, in particular about their contribution to the electrical conductivity of minerals and rocks, is still scarce. This is largely due to the fact that the peer review system often creates near-insurmountable hurdles against the publication of data that seem contrary to long-held beliefs. Most editors of mainstream science journals are themselves part of the mainstream circle. Hence, in cases of adversarial comments from mainstream reviewers, they tend to lean to the safe side and reject manuscripts submitted for publication.

For over a hundred years geoscientists have been trained to think of oxygen anions in natural materials as O2- and nothing but O2-. To introduce O- as a new variant, but at the same time point to the fact that O- is not an ion but an electronic state with unusual properties, most appropriately discussed within the framework of semiconductor physics, requires a level of rethinking for which most geoscientists are ill-prepared.

Lastly, once fully told and understood, the story of p-holes is basically so simple that many mainstream geoscientists are left to wonder why it has taken so long for them to be discovered. If they are so ubiquitous as they appear to be, why did p-holes go unnoticed for over a hundred years? Confronted with this question, by a twist of logic, many mainstreamers succumb to the impulse to reject the p-hole concept out of hand.

The difficulties encountered in the connection with p-holes are similar to others that have punctuated the history of science. The discovery of the p-holes as dormant, yet powerful charge carriers in the Earth s crust calls for a new paradigm in earthquake research and beyond. More often than not, any call for a new paradigm elicits opposition. Therefore, I close with a quote from the philosopher Arthur Schopenhauer who ventured to say: All truth passes through three stages. First, it is ridiculed. Second, it is violently opposed. Third, it is accepted as being self-evident.

Earthquake Lights

Earthquake lights, 12 May 2008, Sichuan China
.
Note: This video was taken 30 minutes before the earthquake. (Click here for the YouTube video)
Note the similarity of colors to the Woodchuck Hill lights of 1985 which were reported as being "yellow-orange."

Igor Smirmov: Polymeric Device, PROTECTION AGAINST EXPOSURE TO ELECTROMAGNETIC RADIATION

2010-08-26T04:18:00.000-07:00

NEW Patent Application Publication

Date: 8 July 2010

Igor: S m i r m o v

A stand alone device that generates protective frequencies

by inducing the oscillation of a polymer at frequencies

that counter adverse effects associated with electromagnetic radiation.

Devices and methods for protection ... - Google Patent Search

TECHNICAL FIELD

[0001] The present invention relates to devices and methods for protection against exposure to electromagnetic radiation and more specifically to a stand alone device that generates protective frequencies by inducing the oscillation of a polymer at frequencies that counter adverse effects associated with electromagnetic radiation.

BACKGROUND OF THE INVENTION

[0002] Every operating electrical and electronic device emits electromagnetic radiation (EMR). The power of this emission varies depending on the size and electrical strength of the device and the electrical current it carries. High voltage power lines are significant emitters, and their field strength is sufficiently high to cause adverse effects on humans, animals and plants even hundreds of feet away. Smaller devices, such as computers, television sets, cellular phones and microwaves, emit lesser quantities of EMR, but the effect on humans can still be significant because people are in much closer proximity to such devices.

[0003] Adverse effects on the health of humans that have been reported as attributable to long-term EMR exposure include occurrence of certain cancers, multiple sclerosis, headache, and sleep disruption, impairment of short term memory, autism, and significant increases in the frequency of seizures in epileptic children. Reported adverse effects on animals have included stillbirths of young and reduction of milk production in cattle.

[0004] Although the effects of electromagnetic radiation on human health are not always easily quantifiable it is the desire of many prudent people to eliminate or reduce their exposure to EMR. There exist various methods of protecting from EMR that rely on reducing the magnitude (or strength) of the radiation that enters human body. Most commonly these utilize some sort of protective shield that enclosures the emitting apparatus hereby reducing the energy that is radiated by the EMR emitting device. Alternative approach is disclosed by Smirnov (U.S. Pat. No. 6,369,399), which describes an EMR shielding material that is composed of an electromagnetic radiation optimum neutralized polymer (MRET-Shield). MRET-Shield material does not reduce the power of electromagnetic fields. It "shields" the cellular structures of the body against the harmful biological effects of EMR. The radiation is still entering the body but the neutralizing effect of MRETShield material reduces the adverse effects associated with exposure. However, MRET-Shield required the design of a protective shell that encloses the EMR emitting device. While personal communications devices, such as cell phone or Blackberry, can be easily adapted to fit into such protective shell as a part of their design, enclosing larger electric appliances (inter alia personal computers, game consoles) is often impractical. Further, replacement of current EMR sources such as power lines would be cost prohibitive. Therefore, there remains a need to protect against EMR emitted from devices that do not provide a protective shell.

SUMMARY OF THE INVENTION

[0005] The present invention addresses deficiencies in current methods for the protection against electromagnetic radia

tion and provides related benefits. In one aspect of the present invention a device for protecting a subj ect against exposure to electromagnetic radiation emitted from a remote source is provided. The device includes a housing, a solenoid operably connected to a driver and a polymer. The solenoid generates incident radiation which results in the polymer emitting electromagnetic oscillations at frequencies that counter adverse effects associated with the subject's exposure to the electromagnetic radiation. In one embodiment, the polymer includes a polar matrix, an oxidated hydrocarbon emulsifier, a galvanic salt, a dye or stain, and a polysaccharide. The solenoid is provided in various configurations. In some embodiments, the solenoid includes a two frequency mode that generates at least one carrier frequency of incident radiation. In other embodiments, the solenoid includes a two frequency mode that generates two carrier frequencies of incident radiation, wherein the carrier frequencies are at higher frequencies than the oscillation frequencies. Carrier frequencies may independently or collectively induce oscillation of the polymer materials. In some embodiments, the solenoid is positioned circumferentially around an inner cylinder that houses the polymer.

[0006] The device of the present invention will have particular utility for the protection against radiation emitted from electronic devices such as a computer, a computer peripheral, a cellular telephone, a television, an audio system, a household appliance, and the like. Further, the device may protect against any intentional or unintentional sources of electromagnetic radiation with Effective Radiation Power (ERP) limited in compliance with FCC regulations. [0007] In another aspect of the invention, methods of protecting a subject against exposure to electromagnetic radiation from a remote source are provided. The methods include providing a device as provided by the present disclosure within an effective radius of the subject, and operating the device, such as by activating the solenoid driver. In some embodiments, the device is positioned within a same room as the subject. In other embodiments the device is placed from about five feet to about twenty feet from the subject. In other embodiments, a plurality of devices is provided within a plurality of locations.

Aetheric Bioelectrical Polymeric-Matrix: A Molecular Resonance Material

2010-02-27T23:31:00.000-08:00

By Thomas-Aaron,

The esoteric humanist work of Wilhelm Reich (1897-1957) is not about truth. Rather a Marxist, a psychologist who has written about the relationships between Marxism and psychoanalysis. We can not come to the same conclusions about what was claimed to be observed in his PA and SAPA Bions-Biogenesis research, Reich's claims about heterogenesis and abiogenesis and the notion of PA Bion is too variable and lacks experimental proof. (See this conclusion in a research paper called Reveiw & Research: Microbiology & Biopoiesis by Paulo Correa 01-02-01.pdf). A communist psychoanalyst in Freud’s circle. This man has proclaimed he has discovered something about an orgasm and bioenergy. Then proclaims the term 'Orgone', a word Reich invents based on the word orgasm. This gross oversimplification merely misleads the unwary reader, historically and scientifically. Reich was a madman and obsessed with communism, feminism, and sex rights for children. Reich's Experiments with aetheric and bioenergy turned into a 'Reich-Orgone-Religion'. Psychoanalysts are liars, they steal ideas, put a spin on them and then take all the credit. Most of all by creating the name 'Orgone', means this name is subject to Reich and his doctrine. Reich is the final authority over the name 'Orgone' and his authoritative babble that goes with it.

Reich's 'Orgone' Accumulator Box called ORAC is some kind of large capacitor. This device has some interesting properties and remarkable qualities: including the anomalous slowing of the discharge of static electricity from an electroscopic discharge, a spontaneous elevation of temperature, the acceleration of plant growth, and the healing of animals and people placed inside the enclosure. But is it not unusual that a big capacitor can interact with the bioelectric life energy field of living things? Certainly Reich is not the only one to observe the effect of alternating layers of conductive and dielectric materials. Static and electrical energy can be stored in a capacitor. How are other types of energy effected by capacitors?

All of matter's properties have been already discovered. The final touch is to explain why matter behaves like this. An electron can not be made of matter, rather matter is made only out of electrons. A wave exhibits all of the electron's properties. This wave contains energy.

Nikola Tesla an honest man said, "We are now confident that electric and magnetic phenomena are attributable to the ether, and we are perhaps justified in saying that the effects of static electricity are effects of ether in motion."

So what is interesting is that polymers possess high values of dielectric constant. This means that external forces can easily displace both bonding and non-bonding electrons. This excites the polymer-matrix, and amplifies the Corona discharge effect.

By these presents:

1. I will refer and use terms like Bioelectrical-Polymer or Polymer-Matrix Material.
2. 'Orgonite' gives credence to Reich's work, persecution and communist destruction of life.
3. Wilhelm Reich will not be a part of this research. He has confused and deceived people.
4. Psychoanalyst are dangerous and experts at mind games and evasion.
5. Psychoanalyst are the last people on earth you want to talk to about physics or biophysics.

I have discovered through research into water structure from the U.S Patent Office, in a patent the term: polymeric matrix that caught my attention. Knowing Don Croft's explanation of 'orgonite' and Jon Logan's material, he has a laboratory called 'Wizzers Workshop', he formulates what he calls 'ergonite' and is honest about things and has no secrets about it.

The U.S. Patent number 6,022,479 by Russian scientist Dr. Igor Smirnov describes a 'Polymeric Matrix Material', He is the real source for explaining how and why it works. Igor Smirnov is unknown to the 'orgonite-cult' they have followed their idols.

I and others have observed the changes in water, wine, green tea, and sake, by changes in texture and flavor. Have also grown larger crystals. M.R.E.T. or Molecular Resonant Effect Technology is what Dr. Igor Smirnov calls the design of the apparatus. His work confirms how this material works, in this device and other applications used by other people by other names, but they all have a polymeric-matrix in common.

Dr. Igor Smirnov and MRET Water Activator
Through Nuclear Magnetic Resonance Tests and Infrared Spectroscopy, Dr. Smirnov discovered the water’s healing secrets—an unusual configuration and high-energy activity of water molecules.

Applied Biophysics Aether Research Laboratory

2008-07-27T03:04:00.000-07:00

Hello and Welcome to a new URL

Welcome (Applied Biophysics)

Click on 'Sitemap' on the left 'Navigation bar'

The Orgone Connection

2008-07-14T03:16:00.000-07:00

Nano Resonance Technology - How It Works

2008-03-16T03:47:00.000-07:00

NRT Technology - How It Works

NRT Nano Resonance Technology

The NRT technology alters the molecular structure of fluids that changes the energy state of the molecule. This change is accomplished through the square wave frequency principal modulating the carrier.

An external square wave generator supplies a pulse to modulate through a solenoid which has two terminals. A rectangular shape was chosen because it is an excellent conductor of current.

Copper wires are wrapped together in parallel plus a number of stranded wires are covered with a plastic varnish for insulation. This coating forms a great number of air pockets between the copper wire and stranded wire. This creates a wave guide for high frequency transmission. A feedback signal is created and it returns to the basic generator, adjusting the frequency required. This induces a current in the toroids generating a spherical magnetic field. When this field collapses, it produces a major magnetic spike that excites one of the NRT patented modules. This module has millions of conical cavities that multiply the incoming signal and induces the frequency back into the fluid with tremendous power.

The function of the module is to provide continuous transmission between crystalzed minerals and three different layers of enriched resin.

For water application, the NRT system can be designed to modify water by changing the frequencies for specifics needs such as water purification.

For wastewater application, the NRT system is designed for disinfectantion, demineralization and removal of solids. This treated wastewater is suitable for irrigation or any agricultural purpose.

For hydrocarbons, the NRT technology modifies the energy state of the combustion material to produce more heat with less byproduct due to more efficient combustion. The resulting efficiency saves up to 12% on fuel costs and reduces emissions up to 60%.

Contact Information
Nano Resonance Technology
3350 Junction Hwy
Ingram, TX 78025
830-367-7044
info@nrtusa.com

Joe E. Schero - President • joe@nrtusa.com

Dr. Eliseo Bonilla - VP Research and Development • dr.bonilla@nrtusa.com

Projects and Patents:
Dr. Bonilla has developed a total of 211 projects, some of them have been patented and others have patents pending. These projects include Magnetic Resonance, minerals, superconductors, integrated circuits and medical projects.

Published Books:
The Aurora Borealis on the North Pole and how different materials are affected by.
ECM Systems Technology for Ground Radar.
Rare Earths Crystalographic Growth (high carbon, high temperature lathe).
Solid State Microwave Design
Magnetic Resonance Cavities.
Water and Sewage, Sytems and Technology in the last 5000 years. (A historical synthesis).

MRET: Oil Absorption test by Setsco

2008-03-15T23:10:00.000-07:00

Process for making a mineral battery

2008-02-09T15:53:00.000-08:00

Publication number: US2008003499
Publication date: 2008-01-03
Inventor: MAEYAMA MITSUO (JP); SAKAI TSUKASA (JP)
Applicant: UNIQUE STONES INC
Classification:
- international: H01M6/04; H01M6/04;
- European:
Application number: US20060477993 20060628
Priority number(s): US20060477993 20060628

esp@cenet mosaic view

Abstract of US2008003499
The present invention provides a process for making a mineral battery using treated powdered polar crystal mineral and a treated liquid as an electrolyte. The polar crystal powder and liquid are either separately or after mixing together subjected to a rotating EMF. The powder-liquid mixture is inserted into a housing and compacted therein to form a mineral battery, along with an anode and a cathode and terminals. The preferred polar crystal mineral is tourmaline. In one embodiment, after the mixture is in the housing it is subjected to a voltage. In one embodiment the mixture is prepared and compacted into the housing and then subjected to a rotating EMF, and may then also be subjected to application of a voltage.

Description of US2008003499

BACKGROUND
[0001] Crystal structures can be divided into 32 classes, or point groups, according to the number of rotational axes and reflection planes they exhibit that leave the crystal structure unchanged. Twenty of the 32 crystal classes are piezoelectric. All 20 piezoelectric classes lack a center of symmetry. Any material develops a dielectric polarization when an electric field is applied, but a substance which has such a natural charge separation even in the absence of a field is called a polar material. Whether or not a material is polar is determined solely by its crystal structure. Only 10 of the 32 point groups are polar. All polar crystals are pyroelectric, so the 10 polar crystal classes are sometimes referred to as the pyroelectric classes. Polar crystals have opposite charges on opposite crystal faces.
[0002] Of the polar crystal minerals, tourmaline is a group name for about thirteen species of minerals that exhibit piezoelectrical characteristics. The Tourmaline group are silicated minerals containing boron, and they belongs to a trigonal or hexagonal, hemimorphic, hemihederal group. Its hemimorphisms are asymmetric with respect to the major axis, and its chemical formulae are complicated. A typical formula is:
[0000]
WX3Y6{NaX3Al6(BO3)3Si6O16(O,OH,F)4} Where W-Ca, K, Na
[0000]
X-Al, Fe2+, Li
[0000]
Y-Al, CR3+, Fe3+
[0000] Natural tourmaline occurs in crystalline schist, gneiss, contact metamorphic rocks, and pegmatite. Tourmaline is capable of being obtained in large crystalline form.
[0003] The following is a set of data for tourmaline taken from the web site http://en.wikipedia.org/wiki/Tourmaline:
[0000]
CategoryMineral Group
GeneralNa(Al,Fe,Li,Mg,Mn)M3Al(Si6O18)(BO3)3(OH,F)4
Chemical
formula
Identification
ColorMost commonly black, but can range from
brown, violet, green, pink, or in a dual-colored
pink and green.
Crystal habitParallel and elongated. Acircular prisms,
sometimes radiating. Massive. Scattered grains
(in granite).
Crystal systemTrigonal
CleavageGood to poor prismatic. Poor rhombohedral
FractureSubconchoidal to even
Mohs Scale7-7.5
hardness
LusterVitreous, sometimes resinous
Refractive indexn[omega] = 1.635-1.675 n[epsilon] = 1.610-1.650
PleochroismNone
StreakColorless
Specific gravity3.02-3.26
The 14 recognized minerals in the group (end member
formulas)
ElbaiteNa(Li1.5,Al1.5)Al6Si6O18(BO3)3(OH)4
SchorlNaFe<2+> 3Al6Si6O18(BO3)3(OH)4
DraviteNaMg3Al6Si6O18(BO3)3(OH)4
ChromdraviteNaMg3Cr6Si6O18(BO3)3(OH)4
OleniteNaAl3Al6Si6O18(BO3)3O3OH
BuergeriteNaFe<3+> 3Al6Si6O18(BO3)3O3F
PovondraiteNaFe<3+> 3(Fe<3+> 4Mg2Si6O18(BO3)3(OH)3O
VanadiumdraviteNaMg3V6Si6O18(BO3)3(OH)4
LiddicoatiteCa(Li2Al)Al6Si6O18(BO3)3(OH)3F
UviteCaMg3(MgAl5Si6O18(BO3)3(OH)3F
Hydroxy-CaFe<2+> 3(MgAl5Si6O18(BO3)3(OH)4
feruvite
Rossmanite(LiAl2)Al6Si6O18(BO3)3(OH)4
Foitite(Fe<2+> 2Al)Al6Si6O18(BO3)3(OH)4
Magnesiofoitite(Mg2Al)Al6Si6O18(BO3)3(OH)4
[0004] A characteristic of tourmaline is that the crystal is electrically polarized on one axis of the crystal. In its natural state there is a potential difference that exists along the face of one side of the crystal. The tourmaline crystal also distorts when an electric field is placed across the crystal.
[0005] Batteries are used to supply electric energy and are well known in the arts. The standard design of a battery consists of a metallic anode, a metallic cathode, separated by an electrolyte material. The generation of electricity is accomplished by separating the reactive components so that the transfer of energy must take place through an external circuit. The anode is the cell electrode where chemical oxidation occurs. The cathode is where chemical reduction occurs in the cell. The cell electrolyte completes the electric circuit by causing the flow of positive and negative ions (called cations and anions, respectively) between the anode and cathode. (See the Chemical Engineer's Handbook, John H. Perry's, 4 edition, 1963, McGraw Hill, pp. 25-25).
[0006] A United States patent application publication to Jyoya (Mar 10, 2005, Jyoya, US 2005/0052824) describes a battery using volcanic ash and other mineral ores. This application mentions 'other mineral ores' including the minerals of the tourmaline group. The construction of a battery of this type provides a generating potential of 1V (unloaded), 0.5V (loaded with a external resistance of 1K) and a current of 0.5 milliamperes.
[0007] A mineral battery is described in a Japanese patent to Maeyama (18 Apr. 2002, Maeyama, 02/31895, PCT/JP00/07059). This device consists of a powder of polar crystal material with water content of more than 5 mass % in a battery housing having an outer wall and with an anode, a cathode and with respective terminals. The preferred embodiment is created from the tourmaline group.
[0008] U.S. Pat. No. 5,601,909 to Kubo (Feb. 11, 1997), describes the fabrication of tourmaline to create 'permanent electrodes' by creating conditions to align the crystal structures.
[0009] A polar crystal battery (hereinafter called a "polar mineral battery") can be constructed by placing powdered polar crystal material with an electrolyte in a container, with terminals for the anode and cathode electrical connections. However, simply putting the materials together does not result in a useful battery. The present invention is a method for constructing a useful battery.

BRIEF DESCRIPTION OF THE DRAWINGS
[0010] FIG. 1 is a flow chart of steps for making a battery according to embodiments of the invention.
[0011] FIG. 2 is a flow chart of steps for further embodiments of the invention.
[0012] FIG. 3 is a flow chart of the steps for further embodiments of the invention
[0013] FIG. 4 is a diagrammatic drawing of a three pole rotating EMF with the material to be treated in the center.
[0014] FIG. 5 is a diagrammatic drawing for the step of applying a voltage according to an embodiment of the invention
[0015] FIG. 6 is a schematic diagram for configurations of series and parallel mineral batteries to increase either voltage and/or current.
[0016] FIG. 7 is a flow chart of the steps for further embodiments of the invention.
[0017] FIG. 8 is a diagrammatic cross section of a battery according to the invention.

DETAILED DESCRIPTION
[0018] Exemplary construction of a polar mineral battery is shown in the WIPO publication number WO 02/31895, the content of which is incorporated herein by reference according to the English language translation made a part of this description as Attachment "A". In this description the term "battery" can mean a single cell battery or a cell of a multi-cell battery, and the term "cell" generally means a cell of a multi-cell battery.
[0019] The present invention resides in a method or methods of making an operable polar mineral battery. As will be seen, the broadest embodiment of the invention resides in use of a polar crystal mineral, and more narrowly, tourmaline as a preferred polar crystal mineral and a process to energize the polar crystal mineral. In a more particular embodiment the polar crystal material is energized by exposing it to a rotating EMF (REMF). Other steps and alternative embodiments are described below.
[0020] Steps for embodiments of the present invention are shown in FIG. 1. There are shown as two alternatives, Alternative 1 and Alternative 2. Other embodiments are described below.
[0021] The first step refers to the polar crystal material. Higher purity of the polar crystal material produces better performance. The preferred material is tourmaline. The material is rendered into a finely ground powder form by known means. The particle size range can be from sub-micron to about 400 mesh. While there is no lower limit to the particle size (all particle sizes referred to herein are average particle size, based on known measurement standards), it is considered that to obtain particle size under 1 micron is not cost effective with relation to the increased electromotive force available from smaller particle size. Further there is no upper limit but when over about 1 mm, the level of decrease of electromotive force is undesirable, therefore a preferred upper limit is about 1 mm. This results in a preferred particle size range of from about 1 micron to about 1 mm. A more preferred particle size is between about 2-5 microns.
[0022] A preferred material is tourmaline and its particle size range is as above, more preferably, about 3 microns.
[0023] A conductive liquid is selected. Water is the preferred liquid but other conductive liquids such as alcohol can be used. While tap water can be used, purer water is preferred. Distilled water is not recommended due to its lower conductivity. The quantity of water should be more than about 5%, more desirably over about 10%. It should be under about 30%, and more desirably under about 20%. A preferred range for the water is about 17-18%. The measurement of water content is done by comparing the difference in the mass weight of dried powder with the mass weight of powder divided by the mass weight of dried powder, this will be referred to as mass percent and is the standard for percentages herein unless the description is expressly different.
[0024] Dried tourmaline powder is produced by placing a tourmaline powder in an oven at 105[deg.] C. for a period of 1 hour.
[0025] It is also appreciated that when the polar crystal powder is prepared by crushing in air with 60-70% relative humidity, the air will contain about 6-8% of water content, in which case it can be used without additional water, or if a higher percentage of water is desired, it can be added to obtain a desired percentage of water.
[0026] Referring to FIG. 1; first the polar crystal powder is provided as described above.
[0027] Then, according to Alternative 1, the conductive liquid, such as water is subjected to an REMF, and separately, the polar crystal powder is also subjected to a REMF. Details of the REMF are described below. Then, the now energized polar crystal powder and liquid are mixed together to produce a mixture. The mixing step is described below. Then the mixture is compacted in a suitable battery housing and sealed.
[0028] Now referring to Alternative 2, it differs from Alternative 1 in that the conductive liquid and the polar crystal powder are first mixed to produce the mixture. Then the mixture is subjected to an REMF. Then the now energized mixture is compacted in suitable battery housing and sealed. This alternative 2 is the preferred method of those in FIG. 1. Various conductive liquids can be used such as water and alcohol. It is considered, with respect to the use of water, that purified water will provide better results. It is also considered that alcohol will provide higher current but for a shorter time. The preferred water percent is about 17% to about 18%.
[0029] As will be described below the battery resulting from these and in fact all alternatives will have an anode and a cathode embedded in the compacted mixture in the battery housing and connected to them connecting means to enable connection of the battery into a circuit.
[0030] The process of applying to the selected material the REMF is accomplished by placing it in the center of an REMF mechanism as shown diagrammatically in FIG. 4.
[0031] In summary, as shown in FIG. 1 in Alternative 1, the REMF is applied separately to the polar crystal material and the conductive liquid while in Alternative 2, the polar crystal material and the conductive liquid are mixed first. The preferred method is Alternative 2.
[0032] Application of the REMF improves the ability to obtain electricity from the battery, and it is considered that this is due to the EMF improving alignment of the charged crystals. The REMF is preferably provided using a three-pole mechanism that generates the REMF (see FIG. 4), the poles being located 120 degrees apart. Generally, applying the REMF longer will improve results. The length of time of application of the REMF is selected in order to obtain effect on the polar crystal material to a satisfactory degree. In the preferred embodiment the REMF is applied for a period of at least about 30 minutes to about 1 hour.
[0033] The REMF is applied at a selected frequency. Preferably a REMF frequency in the range of at least about 48 MHz to about 800 MHz is applied to the mixture of polar crystal material and liquid (Alternative 2). It is considered that for Alternative 1, in which the polar crystal material is treated separately, the frequency range is at least about 48 MHz to about 3 GHz. The frequency range for the liquid alone in Alternative 1 is preferably in the range of at least about 48 MHz to about 800 MHz, preferably from about 700 MHz to about 800 MHz.
[0034] With respect to the compacting step of Alternatives 1 and 2 of FIG. 1, it is performed with sufficient compaction to substantially expel air (which is nonconductive) entrained in the mixture. The compaction will also push the material particles closer together and increase the contact area of particles, which is considered to result in higher current. Also, the compaction will increase the amount of material in the battery, which will enhance its performance. While there may be some piezoelectric effect by this step, that is not the purpose. The compaction should preferably exceed about 3 atmospheres.
[0035] With respect to the sealing step of Alternatives 1 and 2, it is important to seal the battery quickly.
[0036] FIG. 2 shows the steps of the above procedure but with an additional step in each of Alternatives 1 and 2 the processes being designated alternative 1a and 2a respectively. That additional step is to apply a high voltage to the material in the battery housing, before sealing, that material of course now comprising the polar crystal material and the liquid that has been subjected to the REMF treatment and has been compacted into the battery housing.
[0037] FIG. 3 shows further alternatives, Alternative 3 and Alternative 4. In each of Alternatives 3 and 4, the mixture of polar crystal material and conductive liquid are first put into the housing (for the battery) and are then subjected to the REMF. This avoids transferring the mixture after application of the REMF since such transfer may degrade the effect of the REMF. In Alternative 4 the application of high voltage after application of the REMF is included, but in Alternative 3 it is omitted. It is considered that when the REMF is applied while the mixture is already in the housing that application of the voltage may not be necessary; however in Alternative 4 it is used nevertheless as it is considered to enhance the current available.
[0038] FIG. 5 shows schematically application of the high voltage. A preferred voltage is about 50,000 volts. The mixture of polar crystal material and liquid 10 is in a battery housing 12, and a voltage source 14 is connected and the voltage applied. The cover 16 is then put over the battery housing 12. Not shown are the conventional additional parts of a battery, which are well known, the anode, the cathode and terminals all of which are described and shown in the above referenced WIPO publication number WO 02/31895
[0039] After passing the voltage through the mixture, the battery is sealed, and it is still important to seal it quickly after the voltage treatment.
[0040] Exemplary construction alternatives of a polar mineral battery that may be applied to the present invention are shown in the WIPO publication number WO 02/31895, referred to above.
[0041] For a given quantity of polar crystal material and liquid mixture, dividing it up into separate batteries, or separate battery cells and connecting them in series and/or parallel gives better output than using the total volume as one battery or cell. This is schematically illustrated in FIG. 6. By configuring multiple mineral batteries or cells in series, the total electric potential may be increased in an additive fashion as shown in FIG. 6. By configuring multiple mineral batteries in parallel, the amount of current available may be increased in an additive fashion as shown in FIG. 6.
[0042] Assuming that the mixture is homogeneous, as it should be, the quantity Q can be divided by either volume or weight. The illustration showing division into three batteries or cells is exemplary as the number of divisions will depend on the practical manufacture of mixtures and the division into a battery having a number of such cells; all of which can be determined according to the desired commercial products.
[0043] FIG. 7 shows a flow chart for the process, when a given volume of material is divided into cells for an integral battery product. In Alternative 5, the PRIOR STEPS-I refers to the previously described Alternatives 1 a and 2a as shown if FIG. 2 in which after those steps but before the compacting step, fractional portions of the mixture will be compacted into a plurality of battery housings instead of a single battery housing, and will then be subjected to a high voltage, and then sealed. In Alternative 6, the PRIOR STEPS-II refers to Alternative 3 as shown in FIG. 3 in which after those steps but before the compacting step fractional portions of the mixture into a plurality of battery housings occurs and then each battery is subjected to a and sealed. As described above, in Alternative 6, a further alternative is to apply a high voltage to each battery after the application of REMF; that is replicating Alternative 4 with a plurality of battery housings. Also, each of alternatives 1 and 2 as shown in FIG. 1 can be used for multi-cell manufacture in which the compacting step is in a plurality of battery housings.
[0044] A battery or a cell constructed according to the present invention is shown in FIG. 8 in which a housing 20 is shown, constructed from a non-conductive material and consisting of a solid base 22 and a cap 24. The cap 24 has two holes for the anode lead 26 and the cathode lead 28 respectively. The leads are dimensioned to a size that either meets or exceeds the current requirements of the battery with an appropriate safety margin. The anode lead 26 is connected to anode plate 30 constructed from zinc (Zn) or other adequate material by a connecting element 32. The cathode lead 28 is connected to the cathode plate 34 constructed from copper (Cu), silver (Ag), gold (Au) or other adequate material by a connecting element 36. The cathode plate 34 may be solid or a mesh material to provide a greater contact area. The cathode plate 34 may also be constructed from a carbon material as is found in Leclanche cells. The anode plate 30 and cathode plate 34 are separated in the housing 20 and do not come into contact with each other. The mixture is in place around the anode plate and cathode plate as known in conventional batteries and cells.
[0045] The cap 24 is constructed in such a way that when placed base 22 a seal is created. The mineral battery or cell housing can be constructed from a variety of non-conductive materials, including plastic.
[0046] The foregoing Detailed Description of exemplary and preferred embodiments is presented for purposes of illustration and disclosure in accordance with the requirements of the law. It is not intended to be exhaustive nor to limit the invention to the precise form(s) described, but only to enable others skilled in the art to understand how the invention may be suited for a particular use or implementation. The possibility of modifications and variations will be apparent to practitioners skilled in the art. No limitation is intended by the description of exemplary embodiments which may have included tolerances, feature dimensions, specific operating conditions, engineering specifications, or the like, and which may vary between implementations or with changes to the state of the art, and no limitation should be implied therefrom. This disclosure has been made with respect to the current state of the art, but also contemplates advancements and that adaptations in the future may take into consideration of those advancements, namely in accordance with the then current state of the art. It is intended that the scope of the invention be defined by the Claims as written and equivalents as applicable. Reference to a claim element in the singular is not intended to mean "one and only one" unless explicitly so stated. Moreover, no element, component, nor method or process step in this disclosure is intended to be dedicated to the public regardless of whether the element, component, or step is explicitly recited in the Claims. No claim element herein is to be construed under the provisions of 35 U.S.C. Sec. 112, sixth paragraph, unless the element is expressly recited using the phrase "means for . . . " and no method or process step herein is to be construed under those provisions unless the step, or steps, are expressly recited using the phrase "step(s) for . . . "
Data supplied from the esp@cenet database - Worldwide

Tourmaline: WASHING AID AND METHOD FOR USING THE SAME

2008-02-09T15:46:00.000-08:00

WASHING AID AND METHOD FOR USING THE SAME

Publication number: JP2001164296
Publication date: 2001-06-19
Inventor: KIMURA SOSUKE; NAKAI MASAAKI
Applicant: ECOLOGICA KK
Classification:
- international: D06F39/02; C11D7/20; C11D7/22; C11D17/00; D06F39/02; C11D7/02; C11D7/22; C11D17/00; (IPC1-7): C11D17/00; C11D7/20; D06F39/02
- European:
Application number: JP19990348916 19991208
Priority number(s): JP19990348916 19991208

Abstract of JP2001164296

PROBLEM TO BE SOLVED: To apply a polymeric composition of tourmaline and garnet to washing.

SOLUTION: This washing aid is obtained by molding and processing a rubber composition comprising 3-100 pts.wt. of a mixture of the tourmaline with garnet compounded therein or a plastic composition comprising 3-50 pts.wt. of the mixture of the tourmaline with garnet into the form of a sheet. The method of detergent-free washing or washing with a reduced detergent comprises introducing the washing aid together with a material to be washed in a washing bath when carrying out the washing using a commercial available washing machine. Thereby, the washing is carried out by introducing the washing aid in place of the detergent into the material to be washed in which a salad oil is permeated into a commercially available towel. As a result, it may be said that the amount of a detected n-hexane extracted fraction contained in wash water exhibits emulsification of the salad oil as effects of action of the washing aid. That is, the washing using the washing aid suggests the materialization of the detergent-free washing or the washing with the reduced detergent.

Tourmaline: Method and apparatus for producing hydroxyl ion containing air for humidification

2008-02-09T15:42:00.001-08:00

Publication number: EP0806209
Publication date: 1997-11-12
Inventor: KUBO TETSUJIRO (JP)
Applicant: KUBO TETSUJIRO (JP)
Classification:
- international: A61L9/22; A61N1/44; F24F6/04; F24F1/00; A61L9/22; A61N1/00; F24F6/02; F24F1/00; (IPC1-7): A61L9/22; F24F6/00
- European: A61L9/22; F24F6/04B
Application number: EP19970301735 19970314
Priority number(s): JP19960084497 19960314

View INPADOC patent family
View list of citing documents
View document in the European Register

Also published as:

EP0806209 (A2-corr)
EP0806209 (A2)
JP9250785 (A)

Cited documents:

US3832554
EP0421702
US5601909
JP8071409

Abstract of EP0806209
An apparatus and method for producing hydroxyl minus ion - containing air with the function of humidification, by which the humidity of the air is increased and stabilized and which can be always used without limitation of season, climate and area. According to preferable embodiment, the apparatus comprises fibrous humidifying means by water vaporization, blowing means for directly compulsory blowing air to the humidifying means and a tourmaline carrier located at the down wind of humidifying means so that they can contact to the air. The tourmaline carrier comprises tourmaline particles having the average size of 0.3 to 3 microns and air contacting means, which is formed by mixing the tourmaline particles, which has the volume intrinsic electrical resistance of 10<7> to 10<10> OMEGA . cm, and which has the large surface area and which is breathable due to its structure such as sponge-shaped structure, honeycomb-shaped structure, aggregate-shaped structure of particles.

Description of EP0806209

BACKGROUND OF THE INVENTION

1. Field of the Invention

An apparatus and method for producing hydroxyl minus ion - containing air with function of humidification in accordance with the present invention generally relate to those for reforming air in living environment wherein the minus ions (hydroxyl ions) contained in the reformed air is absorbed into a body through the body surface and by means of the respiration, offering useful effect in the field of health and medical treatment.

Therefore, the apparatus and method are utilized for reforming air in the rooms of hospitals, asylum for the aged, homes, offices and any other places. The resultant hydroxyl minus ion - containing air has a large deodorizing effect, adding to the above effect in the field of health and medical treatment.

2. Description of the Prior Art

More than 50 years ago, experts in many fields found that ions contained in air have various kinds of function by large scaled researches. Hence, there have been many researches related to methods and apparatuses for generating the useful minus ions.

The present inventors filed, on 1994 August 31, an invention (Japanese Patent Application Number 6-23045) related to the apparatus and method for producing "hydroxyl minus ion - containing air" by contacting, small aggregates each of which consists of water molecules and which form moisture in air, to numberless of micro electric fields generated by the electrodes of tourmalines carried by the tourmaline carner so that the water molecules of each small aggregate are partially ionized.

The present invention is based on the above prior invention. The basic technique of this prior invention is that the small aggregates, each of which consists of water molecules in the air and which are usually recognized as a moisture component, are ionized into plus and minus ions by utilizing the micro electrodes of the tourmalines. That is to say, the amount of moisture component has a large influence to the structure of the apparatus and the method for producing the hydroxyl minus ion - containing air with the function of humidification. Actually, during the application of the above prior invention, this was clearly proved by the present inventors through their research, experiments and execution tests.

In connection with this fact, as a treatment for solving the problem of the prior invention, some points which should be improved in the prior invention and new matters which should be added to the prior invention are found clearly. This treatment offers the greatly improved and stabilized technical contents and effects, further, enlarged application field and operation over the above prior invention. Since this treatment requires large modification in the theory, construction, and operation, the inventors decided new patent application as the present invention.

The (relative) humidity of the air in our living environment vigorously changes throughout a year. In the pacific-side area of Japan, temperature is low and absolute humidity is also low outside in winter, additionally, in the room, the relative humidity is further low due to heating. Hence, humidifiers are commonly used in such climate condition of winter.

In this season, the concentration of small aggregate of water molecule serving as a moisture component in air is largely decreased, that is to say, the humidity is decreased to a great degree. Therefore, the efficiency of humidifier for producing the minus ions ions in accordance with the above prior invention is lowered so that its effect is decreased. Further, it is often expenenced that humidity changes not only as season changes, but also as climate changes in short period.

The temperature differs very much every zone in the world, in its tropical zone, subtropical zone, temperate zone, and frigid zone. Likely, the humidity differs very much every zone. Accordingly, the effect in the application of the apparatus of the above prior invention also differs very much every zone. The solution for this problem is the important research theme of the technique in the prior invention and inevitable for utilizing this apparatus. In the view of importance of this solution, the present inventors have performed various theoretical researches and experiments for about one year in order to carry out actual execution tests and solve this problem. As a result, the present invention is attained.

As stated above, the apparatus and method of the present invention can be always applied and stable effect can be obtained in regardless to season, climate, and zone where they are used. That is to say, the present invention improves fundamentally the technique of the prior invention, increases the effect obtained by the prior invention, and enlarges the application field of this technique drastically.

According to the apparatus and method in the prior invention, the aggregates each of which consists of water molecules in the air and which have been forced to pass by blowing means using a fan, are passed through the "air contact reaction unit" together with the air. During this passing, from each small aggregate of water molecules (the aggregate is said to consist of about three molecules), which is recognized as the moisture component, the water molecules are partially ionized in the numberless of micro electrical fields formed by the electrodes of the refined tourmalines careered by the tourmaline carrier. Thus, the "hydroxyl minus ion" - containing air is produced so as to be diffused in space. This operation is carried out repeatedly.

SUMMARY OF THE INVENTION

On the other hand, in the present invention, the passed air is humidified just before passed through the "air contact reaction unit" so as to have relative humidity of 40 to 60 % when it passes this unit. For this, the "humidification unit" is located so that the air can be passed through it just before introduced into the "air contact reaction unit". Further, the amount of the passed air is adjusted as desired.

There are many types of method and means for humidifying air. They are generally divided in two types; one type includes those by vaporization and the other type includes those by sprayed steam. In the both cases, they are called as humidifiers. However, the condition of water forming the moisture by one type differs clearly from that by the other type. It is sure that original water is in liquid phase in the both cases. Then, the moisture component produced by using the vaporization is not in the state of liquid phase but "gas phase" so as to have material property of gas. Precisely, the small aggregates each consisting of about three water molecules are diffused, mixed and floated in the air molecules (oxygen, nitrogen, carbon dioxide gas and the like) in air. The size of each aggregate is substantially same as the size of each air molecule. It was disclosed that the particle size of the aggregate is approximately 6 to 7 x 10<-8> cm (Static Electricity Handbook published by Polymer Society in 1989 October).

The water in the gas phase of this moisture component is aggregated so as to be water in liquid phase for forming water droplets or water screens when the humidity is decreased to a point. This point is called as dew point humidity. The particle shaped water in liquid phase is called as the water droplet. The particle size of water droplet of mist is 0.01 mm, while the water droplet of rain is in the range of 0.5 to 3 mm. It is therefore said that the one water droplet of rain corresponds to 1,000,000 water droplets of mist.

In Japan, so-called ultrasonic humidifiers are often used. In the ultrasonic humidifier, each water droplet of water in liquid phase is broken by ultrasonic pressure vibration and the resultant small water droplet in the state of steam is sprayed into the air. On the other hand, in the humidifier by water vaporization the water in liquid phase is volatilized and vaporized. Precisely, the small water droplet obtained in the ultrasonic humidifier is a water particle in liquid phase formed by braking the water droplet with mechanical force. Accordingly, the size ol the particle in the state of steam is different from that obtained by water vaporization. In the case of ultrasonic humidifier, the steam is visible in the state of white mist just after spraying.

In the case of ultrasonic humidifier, unlike the humidifier by vaporization, the impurities are often contained, sometimes bacteria or virus are contaminated or dissolved in water particles in the slate of mist. After each water droplet in the state of mist is secondly volatilized (vaporized), the moisture component in the gas phase is obtained. On this volatilization, the impurities contaminated in the water particles are separated from the water molecules so as to become impurities in air, which causes sanitary problem. Additionally, the water droplets are sometimes not secondly vaporized and attached to the surface of the units of apparatus as they are, which causes "wetting". After that, they are volatilized (vaporized) so as to become moisture component in air.

Among the above two kinds of means for humidifying, as the method used in the present invention, the means by water vaporization should be selected. The means, like the ultrasonic humidifier, where the water is used in the state of steam is unsuitable, because by such means, the wetting would be caused on the surface of tourmaline carrier in the air contact reaction unit, resulting in disturbing electrode reaction.

In the case of humidifying by water vaporization, the amount of water volatilized by this vaporization is proportion to the difference between humidity of the passed air when humidified at the humidification unit and saturated humidity at the temperature of the air passed through the humidifation unit. Additionally, this amount generally depends on the absorbing ability of passed air which is humidified, the absorbing ability of humidifying material in the humidification unit, and efficiency and contact time between the passed air and humidifying material. When the passed air is dry and has low humidity, the degree of humidification of the air is increased. On the other hand, when the passed air has high humidity, the humidification degree is decreased.

Therefore, humidity conditioning is performed according to the humidity of the passed air. The humidification degree can be controlled by adjusting the volume (speed) of compulsory blowing air. It is common that comfortable temperature and humidity in the living environment is 15 to 20 DEG C and 40 to 60 %, respectively. It is required to consider the structure and adjusting operation of this apparatus in order to include the temperature and humidity in such ranges.

It is clear from the above explanation that, in summer, when humidity is high and temperature is high, the moisture component can be partially changed to the hydroxyl ions by this apparatus. These hydroxyl ions accelerate the vaporization of water (sweat) attached to the surface of skin and under wear of each user. Then, the user feels comfortable, because the water's temperature is decreased by expensing vaporization heat. This effect is similar to the effect of cooling fan. On the other hand, in winter, when air is dry and humidity is low, this apparatus can be used for humidifying. Additionally, since this humidifying is carried out by vaporization, air is not contaminated.

In the apparatus and method for producing the hydroxyl minus ion - containing air with the function of humidification in accordance with the present invention, the ionization of not air itself but of water in the air is directed. This direction is basically the same as the above prior invention on which the present invention is based. Then, the present inventors paid attention to the fact that water is contained in air. The water contained in air is called as moisture whose degree is expressed by humidity. The water is floated in the form of small aggregates each consisting of few water molecules. The radius of the water molecule is 1.5 x 10<-8> cm.

According to the apparatus and method in the above prior invention, the aggregates, each of which consists of water molecules in air and which has been forced to pass by blowing means using a fan, are passed through the "air contact reaction unit". On the passing, from each small aggregate of water molecules (it is said that the aggregate consists of about three molecules), which is recognized as the moisture component, the molecules are partially ionized in the numberless of micro electrical fields formed by the electrodes of the refined tourmalines carried by the tourmaline carrier. Thus, the "hydroxyl minus ion" - containing air is produced so as to be diffused in space. This operation is carried out repeatedly.

In the present invention, the apparatus and method of the pnor invention are totally utilized. However, according to the present invention, the passed air is humidified just before passed through the "air contact reaction unit". Concretely, the "humidification unit" is located so that the air is passed through it just before introduced into the "air contact reaction unit". Further, the amount of the passed air is adjusted as desired.

Now, the concrete construction of the present apparatus and method for producing the hydroxyl minus ion - containing air with the function of humidification is stated closely. In accordance with one aspect of the present invention, the apparatus for producing the hydroxyl minus ion - containing air with the function of humidification has the following construction. This apparatus comprises the humidifying means by water vaporization. Then, this apparatus comprises the tourmaline carrier, which is provided so as to be located at the down wind of the humidifying means. Further, this apparatus comprises the blowing means, which directly blows air to the tourmaline carrier and the above humidifying means by water vaporization so that the tourmaline carrier and the humidifying means can contact to the air.

The above tourmaline carrier comprises the tourmaline particles having the average size of 0.3 to 3 microns and the air contacting means which is formed by mixing the above tourmaline particles, which has the volume intrinsic electrical resistance of 10<7> to 10<10> OMEGA .cm, which has the large surface area and which is breathable due to its structure such as sponge-shaped structure, honeycomb-shaped structure, aggregate-shaped structure of particles, or the like.

Secondly, in accordance with another aspect of the present invention, the method for producing the hydroxyl minus ion - containing air with the function of humidification has the following construction. This method comprises directly blowing, with the blowing means, the air to the tourmaline carrier, which is located at the down wind of the humidifying means by water vaporization so that the tourmaline carrier can contact to the air. Thus, the water (moisture) in the air is ionized so that the hydroxyl ions can be produced.

The above tourmaline carrier comprises the tourmaline particles having the average size of 0.3 to 3 microns and the air contacting means which is formed by mixing the above tourmaline particles, which has the volume intrinsic electrical resistance of 10<7> to 10<10> OMEGA . cm, which has the large surface area and which is breathable due to its structure such as sponge-shaped structure, honeycomb-shaped structure, aggregate-shaped structure of particles, or the like.

Thirdly, in accordance with still another aspect of the present invention, the apparatus for producing the hydroxyl minus ion - containing air with the function of humidification has the following construction. This apparatus has the same construction as that of the first mentioned apparatus except one matter explained below. Accordingly, the whole of explanation of the construction of the above apparatus is used and one matter is added to it. Precisely, in this apparatus, the tourmaline carrier is specified as the carrier manufactured with fiber, elastomer, ceramic or plastic.

At last, in accordance with further another aspect of the present invention, the method for producing the hydroxyl minus ion - containing air with the function of humidification has the following construction. This method has the same construction as that of the secondly mentioned method except one matter explained below. Accordingly, the whole of explanation of the construction of the above method is used and one matter is added to it. Precisely, in this method, the tourmaline carrier is specified as the carner manufactured with fiber, elastomer, ceramic or plastic.

BRIEF DESCRIPTION OF THE DRAWINGS

The object and advantages of the invention will become understood from the following detailed description of preferred embodiments thereof in connection with the accompanying drawings in which:

Fig. 1 is a front sectional view showing an embodiment of the apparatus for producing hydroxyl minus ion - containing air with the function of humidification in accordance with the present invention;
Fig. 2 is a front sectional view showing another embodiment of the apparatus in accordance with the present invention;
Fi g. 3 is a front sectional view showing still another embodiment of the apparatus in accordance with the present invention;
Fig. 4 is a partially enlarged plan view of the part of tourmaline, carrier of the apparatus in accordance with the present invention;
Fig. 5 is a front sectional view showing further another embodiment of the apparatus in accordance with the present invention;
Fig. 6 is a front sectional view showing still further another embodiment of the apparatus in accordance with the present invention;
Fig. 7 is a temperature graph showing the result of measurement using the apparatus according to the present invention;
Fig. 8 is a humidity graph showing the result of measurement using the apparatus according to the present invention;
Fig. 9 is a numerical graph showing the temperature of Table 1;
Fig. 10 is a numerical graph showing the humidity of Table 1;
Fig.11 is a numerical graph showing the temperature of Table 2;
Fig. 12 is a numerical graph showing the humidity of Table 2;
Fig. 13 is a numerical graph showing the temperature of Table 3; and
Fig. 14 is a numerical graph showing the humidity of Table 3.

DETAILED DESCRIPTION OF THE PREFERRED EMBODIMENT

Now, the embodiments of apparatus and method for producing the hydroxyl minus ion - containing air with the function of humidification in accordance with the present invention are explained. First, in this apparatus and method, humidifying means by water vaporization is used. With this means, water is soaked into a fabric and the like and blowing is occurred there. Next, a tourmaline carrier is used, which is manufactured with a substance being breathable such as fabric. This tourmaline carrier is located down wind of the above humidifying means by water vaporization. Then, compulsory blowing means such as an electric fan and the like is used. This means directly forces the air to blow to the tourmaline carrier and the humidifying means by water vaporization so that the tourmaline carrier and the humidifying,,means can contact to the air.This blowing means may be located either up wind or down wind of the above humidifying means and tourmaline carrier or may be located at the intermediate between the above humidifying means and tourmaline carrier.

This tourmaline carrier comprises the tourmaline particles having the average size of 0.3 to 3 microns and the air contacting means which is formed by mixing the above tourmaline particles, which has the volume intrinsic electncal resistance of 10<7> to 10<10> OMEGA .cm, and which has the large surface area and which is breathable due to its structure such as sponge-shaped structure, honeycomb-shaped structure, aggregate-shaped structure of particles, or the like.

Embodiment

Now, embodiments of the apparatus and method for producing hydroxyl minus ion - containing air with the function of humidification in accordance with the present invention are stated below. First, as for humidifying means and method thereof, a water tank is provided so as to be located adjacent to the apparatus. Since the water is used for humidifying passed air, the tank stores water in order to compensate the decrease of water. Then, this tank is preferably structured so that water can be easily supplied thereto. The water discharged from the tank (water tank) is absorbed through the under surface of a humidification mat (or fabric) and used for humidifying the air which has been blown by a fan. The tank is configured so that water can be always supplied thereto.

There are two types of absorbing material and manner of use. One type of absorbing material is a mat manufactured with a polymeric compound. This polymeric compound is called as a polymeric high-absorbing material and can absorb water of 10 to 100 times as much as its own weight. This mat has the constant thickness and is configured so as to contain sufficient amount of water and be highly breathable, for example the mat has a sponge-shaped structure. By partially immersing the end of mat into the water tank, the water is absorbed on the total surface of the mat. Then, since the water absorbed on the surface of the mat is contacted with the air passed through small ventilating holes formed on the total surface of the mat, the water is vaporized whereby the humidity of the passed air is increased.The other type of absorbing material is a belt manufactured by a fabric which is considerably easy to be wet and highly breathable. The lower end of belt is immersed into the water tank with a roller. The lower end of belt is wet in the water tank, and by rotating slowly an upper roller, the lower end of belt is moved up to reach the upper roller. On moving up, air is contacted with the fabric for humidification.

In the above both types, it is important that the humidification unit is located so that the air is passed through it just before introduced into the contact reaction unit, which is produced with the tourmaline carrier. By this location, the air is passed through the contact reaction unit while it is humidified. In the same way as common air conditioner, at the inlet of contact reaction unit, a filter is provided so as to remove dusts in the air.

Now, the apparatus and method for producing the hydroxyl minus ion - containing air with the function of humidification in accordance with the present invention are stated below by way of their concrete embodiments in connection with the accompanying drawings. As shown in the front sectional view of Fig. 1, this apparatus comprises the humidifying means 1. In this humidifying means 1, the absorbing material manufactured with fiber, elastomer, ceramic, or plastic is immersed into water, and the air is passed through the absorbing material in order to vaporize the water. In Fig. 1, the immersed portion 1a of the humidifying means 1 is provided at the opposite sides of the humidification main body 1b. However, as shown in Fig. 2, the immersed portions la may be provided at the center of the humidification main body 1b.In the apparatuses shown in Figs. 1 and 2, the humidifying means 1 is provided vertically and the tourmaline carriers 2 stated below is provided horizontally. On the other hand, as shown in Fig. 3, the humidifying means 1 and the tourmaline carriers 2 may be provided vertically.

Next, the tourmaline carrier 2 comprising breathable material such as fabric is provided. The tourmaline carrier 2 is located down wind of the humidifying means 1 by water vaporization. Then, this apparatus comprises an electric fan 3 serving as a compulsory blowing means. The electric fan 3 directly forces air to blow to the tourmaline carrier 2 and the above humidifying means 1 by vaporization of water so that the tourmaline carrier and the humidifying means contact to the air. The electric fan 3 may be located either up wind or down wind of the above humidifying means 1 and tourmaline carrier 2 or it may be located at the intermediate between them. The above mentioned parts are installed in a frame body 4. Then, when the apparatus is operated, the desired amount of water 5 is supplied to the water tank 4a which defines the lower portion of the frame body 4.

As shown in partially enlarged plan view of Fig. 4, the above mentioned tourmaline carner 2 comprises tourmaline particles 2a each having the particle size of 0.3 to 3 microns and a substance 2b which is formed by mixing these tourmaline particles 2a and which has the volume intrinsic electrical resistance of 10<7> to 10<10> OMEGA .cm. Then, this substance 2b has the large surface area and is breathable due to its structure such as sponge-shaped structure, honeycomb-shaped structure, aggregate-shaped structure of particles so as to be air contacting means 2b.

The electric fan 3 directly forces the air to blow to the above tourmaline carrier 2 which is located down wind of the humidifying means I by water vaporization so that the carrier 2 can contact to the air. By this contacting, the water molecules (moisture) in the air is ionized so that minus ions can be obtained.

In the embodiments of Figs. 1 to 3, the air is blown in the upward direction. However, the embodiments of Figs 5 and 6, the air is blown in the horizontal direction. The embodiments of Figs. 1 to 3 are preferably used for small size apparatuses, while the embodiments of Figs 5 and 6 are preferably used for medium size apparatuses. In every embodiment except the embodiment of Fig. 6, the humidifying means 1 is a fix-type. In the embodiment of Fig. 6, the humidifying means 1 is a belt-type. The humidifying means 1 is rotated by a motor through a pair of rollers 1c. The humidifying means 1 is continuously immersed into the water tank 5 located below the humidifying means 1. In each of'the embodiments shown in Figs. 5 and 6, the electrical motor M of the electric fan 3 is covered with a water proof cover. This electric fan 3 is a rotary type. A rotating fin 6 is located down wind of the electric fan 3 and reciprocatively rotated with a motor 6a so that the air is fed out and diffused.

Now, the research for the effect of the present invention is explained.

Content: "Generator for hydroxyl minus ion - containing air" in accordance with the present invention was configured as an experimental model for the purpose of recognizing the following effect.

Object: This research was performed for recognizing the effect obtained by provision of a humidification filter. This humidification filter was provided so that air was humidified for increasing its humidity just before being passed through another filter by compulsory blowing. This filter used in the compulsory blowing was manufactured with rayon fiber (nonwoven fabric) and carried tourmaline crystals having permanent electrodes.

Apparatus used in research: The elements ol the apparatus used in this research is shown in Fig. 1. In this Figure, the present apparatus comprises a wooden frame body 4 and air contact reaction unit 2, which carries tourmaline crystals and which is manufactured with rayon nonwoven fabric. Then, the apparatus comprises an axial fan 3 which has 12 VDC, which is produced by Olix Co. and which is used for blowing. Further, the apparatus comprises a water container (water tank) 4a which is used for immersing the lower end of humidification mat.

Experiment: As the experimental models, vaporization type humidifier made in USA and that made in Swiss and vaporization type cooling fan humidifier by Toshiba Co. in Japan were used. The effect obtained by the provision of humidification unit was remarkable in every reformed experimental model.

In the case of experimental model in accordance with the above prior invention, the season with low humidity from 1994 December to 1995 February, there were some answers that deodorant effect against the smell caused by smoking was reduced (there were some answers, particularly in the room where there were many smokers, " The effect was reduced").

However, in the case of experimental model in accordance with the present invention, very good evaluations could be obtained as the following answers.

a. "Not only deodorant effect but also comfortable feeling of the air in the room where the apparatus was used could be obtained clearly."
b. "When only a cooler without the humidification unit was operated, specific uncomfortable feeling was caused."
c. "The feeling for the air in the room where the apparatus was used differed drastically from that in the room where the apparatus was not used."
d. "Pets (Cats) would not go out from the room where the apparatus was used."
e. "My appetite was increased." "I was not tired in the room where the apparatus is used." and "I could sleep well."
f. "I want that the apparatus can be soon available in market."

As stated above, the very good evaluations could be obtained. Therefore, it is expected the apparatuses are used in many places such as office, home, hospital, asylum for the aged, traffic (train, car, airplane) and the like.

When the apparatus and method for producing the hydroxyl minus ion - containing air in accordance with the present invention are applied, the following conditions are preferably required.

a. The presence of small aggregates each of which consists of few water molecules is important point of the present invention. Accordingly, the common vaporization type humidifier must be used in the apparatus and method for producing the hydroxyl minus ion - containing air. The ultrasonic spray type is not available, because, if humidifier of this type is used, the tourmaline carner in the air reaction unit would be wet, whereby electrode reaction would not be occurred.
b. The apparatus should be configured such that after the air is passed through the humidification unit, the resultant moisture component can be passed through the air reaction unit as it is.Then, the minus ions (hydroxyl ions) produced in the air reaction unit are mixed into the moisture component in the air. It should be noted that although the minus ions are unstable in the liquid, they are stable in air, because the air serves as an isolator. But when the minus ions are absorbed into water or sweat on the skin surface of a human body, they work as surface active agents.
c. It is generally said that comfortable humidity is 40 to 60 %. However, in the hydroxyl minus ion - containing air, these ions are adsorbed and absorbed into the water on the surface of skin and under wear of each user so that the water vaporization is accelerated. Since vaporization heat is expensed, the user can feel that the humidity is decreased and the climate is comfortable even in summer with high humidity.In this situation, the hydroxyl ions function as not minus ions in the air but surface active agents for the water.

Now, the experiment is explained concretely.

1. Method of Experiment

(1) The experimental apparatus as shown in Fig. 1 was operated on a desk at the corner of a room having the area of 39.6 m<2>.
(2) The room is closed except when a person goes in and out of the room.
(3) Cooler and heater are used as usual.

2. Measurement

(1) The temperature and humidity (relative) were measured near the experimental apparatus (spaced from the apparatus with the distance of 50 cm to 1m) at the same height as that of the apparatus. At the same time, the temperature and humidity of the air which was passed through the humidification unit in the frame body just before passed through the air contact unit were measured with the meter of temperature and humidity provided on the wall of the frame body.
(2) The measurements were earned out about 10 a.m. and more than 20 days of every month from 1995 September to 1996 February at a city located on the pacific side of Japan.
(3) The results of these measurements in every month were indicated graphically and the average values were calculated.

3. Rayon Fiber Tourmaline Carrier

(1) Component of the rayon fiber was 66.5 wt % of rayon, 2.5 wt% of tourmaline (0.4 mu of average particle size) and 30 wt % of polyester (total; 100%). The rayon fiber has 7 denier (7 g / 9000 m).
(2) The nonwoven fabric (75 g / 1 m<2>) formed by the above polyester and tourmaline rayon was used in the tourmaline carrier.
(3) As the rough tourmaline, ores produced in China were used. Each ore has the strength electrode factor disclosed in the patent specification of Japanese Patent Application Number 5-36234. These ores were ground to powders each having the avenge size of 3 mu by Peking Metallurgy Industry Steel Research Center. After, they were imported, they were ground to particles each having the average size of 0.4 mu .

4. Air Contact Reaction Unit

(1) As the material for passing the air used in the air contact reaction unit, four sheets of nonwoven fabric mats were used, each of which has the area size of 15 cm x 15 cm and the thickness of 3 cm.
(2) The total weight of nonwoven fabric mats was 75 g / m<2> x 0.15 m x 0.15 m x 4 sheets = 75 g x 0.09 m<2> = 6.75 g

5. Result of Measurement

The temperature and humidity out side of the apparatus used in the experiment were measured. Then, the temperature and humidity of the humidified air in the frame body of the apparatus, before being introduced into the air reaction filter, were measured. From these measurements, average values were obtained every month, as shown in the following table.
Columns=3

Head Col 1:
Head Col 2: outside of the frame body
Head Col 3: in the frame body, just after the humidification
September59.1 % (24.9 DEG C)66.0 % (22.0 DEG C)
October48.1 % (22.3 DEG C)61.3 % (20.9 DEG C)
November36.6 % (16.4 DEG C)50.4 % (16.2 DEG C)
December29.4 % (13.5 DEG C)42.6 % (13.5 DEG C)
January27.8 % (15.3 DEG C)44.1 % (16.2 DEG C)
February24.4 % (15.1 DEG C)42.1 % (15.6 DEG C)

The above result is shown graphically in Figs. 7 and 8.

6. Summary of Result

(1) The average humidity in the room varies every month from Septembcr to February in the wide range of about 59 to 24 %.
(2) By provision of humidification unit, the average humidity is increased and stabilized in the range of about 66 to 42 %.
(3) From the fact that the average humidity is stabilized in the range of 66 to 42 % by the apparatus and method, it is clear that the present invention for producing hydroxyl minus ions in the air can offer the effect every season and every area.
(4) The temperature of the air after humidification in September was decreased from the temperature outside of the frame body by 2.9 DEG C. Then, in October and November, the temperatures were decreased by 1.4 and 0.2 DEG C, respectively. Further, in December, the temperature is not changed. In January and February, temperatures were increased by 0.9 and 0.5 DEG C.This means that in hot season such as September in Japan, the apparatus of the experiment offers the same effect as that of cooling fan, while, in winter season such as December, January, and February, the apparatus does not disturb the effect of heating.

The apparatus used in the experiment is shown in Fig. 1. The meter S for measuring temperature and humidity is configured so that the temperature and humidity of the air between the air humidification unit and air contact reaction unit is measured with its sensor and the result of measurement is indicated outside of the apparatus. The air introduced from the side of the apparatus is passed through the humidifying material's portions which are not immersed in the water and is crossed the humidifying material's horizontal portion so as to move upward.

Next, an equipment for measuring the concentration of ion contained in air is explained.

As an equipment for measuring the concentration of plus and minus ions contained in air, there is a measurement equipment developed by Kobe Electric Wave Co. (Kobe City in Japan). This equipment is based on a principle that the movement velocity of ion depends on the size of ion.

In the measurement of this experiment, the equipment of this kind of model number KSI - 900 was used. With this equipment, only ions each having the particle size of 0.0026 mu m or smaller can be measured. As equipment of this kind, there are those of model number KSI - 1000 (for the particle size of 0.01 mu m or smaller) and model number KSI - 2000 (for the particle size of 0. 1 mu m or smaller). They are used for measunng the concentration of plus and minus ions and that of charged corpuscles contained in atmospheric air on the earth, in the purpose of research for the relation between the meteorological elements and the change of density of plus and minus ions contained in air.

Were measured the concentration of plus and minus ions each having the particle size of 0.0026 mu m (2.6 x 10<-7> cm) and smaller by utilizing the equipment of model number KSI - 900.

According to the literature (Static Electricity Handbook edited by Polymer Society), some data related to hydroxyl ions [(H2O)n + OH<->] shown in the present invention is disclosed by Chapman in his report by way of measurement result of the size of water droplet. number of water molecules, and the mobility of water molecule.
Columns=3

Head Col 1: radius (cm)
Head Col 2: number of molecules
Head Col 3: mobility (cm<2>/V.cm)
33 x 10<-8>3 H2O+H<+>1.0
33 x 10<-8>3 H2O+OH<->0.95

In this report, it is inferred that three water molecules can carry two OH<->.

Then, in an experiment with the apparatus for producing the hydroxyl minus ion - containing air, the numbers of plus and minus ions were measured by utilizing the above equipment on 9:30 a.m. In the room, there were three persons one of who was a smoker. One minute had passed after the smoker (spaced from the apparatus with about 1.5 m) smoked once, the number of plus ions per 1 cc of air increased to the value around 120. The numbers of plus and minus ions were measured, resulting in the following data.
Columns=3

Head Col 1:
Head Col 2: minus ion (number / 1 cc air)
Head Col 3: plus ion (number / 1 cc air)
apparatus is not operated28 to 3830 to 33
apparatus is operated80 to 8528 to 38

(The maker that produces the measurement equipments of this kind reported, as the measurement result, the change of density of plus and minus ions in atmospheric air on ocean after typhoon, with the equipment of model number KSI - 1000 (for particle size of 0.01 mu m or smaller). According to this report, average number of plus and minus ions is about 100/1 cc air, throughout one day.)

In the above experiment with the apparatus for producing the hydroxyl minus ion - containing air in accordance with the present invention, the change of number of plus and minus ions produced with the minus ion - generator was researched.

As shown in the above explanation, the following results were obtained.

(1) When the generator was operated, the number of minus ions is 80 to 85, while the number of plus ions is 28 to 38.
(2) Before the generator was operated, the number of minus ions is 28 to 38, while the number of plus ions is 30 to 33.
(3) Within one minute after the smoker (spaced from the apparatus with about 1.5 m) smoked once, the number of plus ions increased to the value around 120.

The data obtained above is shown in the companied Table 1 to 3. Table 1 is the data of 1995 September, Table 2 is the data of 1995 November and Table 3 is the data of 1996 February.

The temperature and humidity of air outside the apparatus and in the frame work of the apparatus were measured in 1995 September, 1995 November and 1996 February, respectively. These measurement results are indicated in Tables 1, 2, and 3, in this order.
Id=Table I Columns=5

Head Col 1: date
Head Col 2: temparature ( DEG C outside)
Head Col 3: humidity (% outside)
Head Col 4: temparature ( DEG C in frame work)
Head Col 5: humidity (% in frame work)
September 120622663
September 621522256
September 1627632373.5
September 1827592069
September 19275721.568
September 2027582266
September 2127542063
September 22276221.563.5
September 232747.62363
September 2424672369
September 2525622366
September 2623562166
September 27237122.574
September 2924662366
September 3025492264

average24.959.022.266.0

The temperature and humidity of air outside the apparatus and in the frame work of the apparatuis were measured in 1995 September, 1995 November and 1996 February, respectively. These measurement results are indicated in Tables 1, 2 and 3, in this order.
Id=Table 2 Columns=5

Head Col 1: date
Head Col 2: temparature ( DEG C outside)
Head Col 3: humidity (%outside)
Head Col 4:Temparature ( DEG C in frame work)
Head Col 5: humidity (%in frame work)
November 121452059
November 216361648
November 219381848
November 616371652
November 618361846
November 718401856
November 818471860
November 820382056
November 914381452
November 10202219.542
November 1317371752
November 1417401653
November 1516401652
November 1613371246
November 1716361648
November 1815361648
November 2014381452
November 2115401652
November 2214381450
November 2416421656
November 2712421156
November 2811321144
November 2821282046
November 2913321345
November 3021202142
average16.436.616.250.4

Id=Table 3 Columns=5

Head Col 1: date
Head Col 2: temparature ( DEG C outside)
Head Col 3: humidity (% outside)
Head Col 4: temparature ( DEG C in frame work)
Head Col 5: humidity (% in frame work)
February 115181840
February 214161440
February 511221241
February 615181541
February 712141440
February 812171440
February 917221842
February 1314261440
February 1415261641
February 1519341850
February 1614301445
February 1621272148
February 1913321539
February 1920272036
February 2011241232
February 2022202233
February 2112221242
February 2212221244
February 2313221240
February 2618251846
February 2713361350
February 2720322050
February 2815301549
February 2918251744

average15.325.415.742.2

The numerical data of temperature and humidity of Tables 1, 2 and 3 are indicated graphically in Figs. 9, 10 and 11, respectively.

As stated above, the apparatus and method for producing the hydroxyl minus ion - containing air with the function of humidification in accordance with the present invention offer the great effect. Precisely, by the provision of humidification unit, the humidity of the air is increased to about 60 to 40%. Such increased and stabilized humidity 60 to 40% teaches that apparatus for generating minus ions in air can be always used throughout year without limitation of season, climate and area where the apparatus is used.

Particularly, the minus ions are absorbed and absorbed into the water on the surface of skin and under wear of each user, the water vaporization is accelerated and vaporization heat is expensed. Then, the user feels as if humidity was decreased comparing with actual humidity. Hence, even in summer with high humidity, the user can feel comfortable. That is to say, the apparatus and method offer useful effect like a cooling fan in summer, while they do not disturb the effect of heater.
Data supplied from the esp@cenet database - Worldwide

Tourmaline: PLATE-LIKE BATTERY AND MANUFACTURE THEREOF

2008-02-09T15:39:00.002-08:00

Publication number: JP11054136
Publication date: 1999-02-26
Inventor: HASEGAWA YOSHINARI
Applicant: HASEGAWA YOSHINARI
Classification:
- international: H01M4/06; H01M6/18; H01M6/22; H01M4/06; H01M6/00; H01M6/18; (IPC1-7): H01M6/18; H01M4/06; H01M6/22
- European:
Application number: JP19970204549 19970730
Priority number(s): JP19970204549 19970730

Abstract of JP11054136

PROBLEM TO BE SOLVED: To provide a plate-like battery which can be housed in a small space, and a method for manufacturing the same.

SOLUTION: Tourmaline is pulverized into fine particles, which are mixed with a polymeric resin having acid resistance to form a cathode as a biscuit plate-like molding. A plate-like anode is made of a conductor material. An acid solution and an oxidant are kneaded to form an organic polymeric solid electrolyte as a clay plate-like molding. The cathodes and the anodes are alternately layered with the electrolyte held therebetween, thereby obtaining a plate- like battery.

Tourmaline Piezoelectric composition Rebalancing electrical potential call membran

2008-02-09T15:39:00.001-08:00

INDUSTRIAL MATERIAL COMPRISING ORGANIC POLYMERIC MATERIAL AND ARTICLE MADE THEREOF

2008-02-09T15:37:00.000-08:00

Publication number: JP9157533
Publication date: 1997-06-17
Inventor: GOTOU YOSHIYO
Applicant: KOKEN KK
Classification:
- international: C08K3/00; C08K5/10; C08K7/00; C08K7/02; C08L89/00; C08L101/00; C08K3/00; C08K5/00; C08K7/00; C08L89/00; C08L101/00; (IPC1-7): C08L101/00; C08K3/00; C08K5/10; C08K7/02; C08L89/00
- European:
Application number: JP19950347466 19951204
Priority number(s): JP19950347466 19951204

esp@cenet mosaic view

Abstract of JP9157533

PROBLEM TO BE SOLVED: To provide an article made of an industrial material comprising an organic polymeric material, by the use of which our life or nature can be improved even if a little and we can enjoy life.

SOLUTION: A material or an article comprising an organic polymer such as paper, fibers, synthetic resins, wood or coating materials is interweaved (including making into paper), kneaded, impregnated or coated with an additive comprising at least one member selected from among powders of a natural stone such as tourmaline, diamond, rock crystal and pearl or a far-infrared- emitting mineral powder such as of ceramics, shells and corals, extracts prepared by dissolving animal proteins from feathers, honeycombs, silk cased of bagworms, silk, insects, fishes and shellfishes in monomolecular water followed by extracting and fine short fibers of natural fibers such as vegetable or animal fibers, and the treated material or article is plated.

POLYMERIC MEDICAL TREATMENT BODY

2008-02-09T15:35:00.000-08:00

Publication number: JP2001104493
Publication date: 2001-04-17
Inventor: KATAOKA MITSUMUNE
Applicant: TOKIN CORP
Classification:
- international: A61N1/00; A61H39/04; A61K9/70; A61N2/08; A61N5/06; A61P43/00; C08K3/04; C08K3/34; C08L101/00; A61N1/00; A61H39/04; A61K9/70; A61N2/00; A61N5/06; A61P43/00; C08K3/00; C08L101/00; (IPC1-7): A61N1/00; A61H39/04; A61K9/70; A61N2/08; A61N5/06; A61P43/00; C08K3/04; C08L101/00
- European:
Application number: JP19990283624 19991005
Priority number(s): JP19990283624 19991005

esp@cenet mosaic view

Abstract of JP2001104493

PROBLEM TO BE SOLVED: To provide a medical treatment body combinedly having functions of each of a treatment body utilizing magnetic line of force and a treatment body utilizing far-infrared rays which are used for treating lumbago or stiff shoulder.

SOLUTION: A molding of a complex in which tourmaline powder and carbon black powder are kneaded with a polymer is used as a treatment body. Pain caused by muscular fatigue is relieved soon by a synergistic effect of magnetic line of force and far-infrared rays emitted from the tourmaline, and a thermal effect of the carbon black power.

INTERNAL COMBUSTION ENGINE AND AUTOMOBILE

2008-02-09T15:28:00.001-08:00

Publication number: JP2001221109
Publication date: 2001-08-17
Inventor: AZUMA MANABU
Applicant: NILES PARTS CO LTD
Classification:
- international: F02B75/10; F02B51/00; F02M27/02; G21B1/00; F02B75/00; F02B51/00; F02M27/00; G21B1/00; (IPC1-7): F02M27/02; F02B51/00; F02B75/10; G21B1/00
- European:
Application number: JP20000029905 20000208
Priority number(s): JP20000029905 20000208

esp@cenet mosaic view

Abstract of JP2001221109
PROBLEM TO BE SOLVED: To clean exhaust gas of an internal combustion engine and to improve fuel consumption with an easily retrofitted device. SOLUTION: A fuel reformer 1 for reforming fuel of the internal combustion engine comprises a fluorocarbon polymeric member 2 having a fuel passage inside thereof, an ionization catalyst layer 3 including fine powder of tourmaline formed on the periphery of the member 2, a solid-electrolyte layer 4, an outer layer 5 of a conductive metal member, and a fixing cap 6 for fixing and sealing both end portions of the outer layer 5. The fine powder of the tourmaline included in the ionization catalyst layer 3 produces a quantum-mechanically strong high electrostatic field by spontaneous polarization. Electrons are extracted from a part of atomic hydrogen of the fuel in a fuel passage 7 by the quantum high electrostatic field to be protons. Some hydrogen nuclei in the fuel are converted to neutrons by an Auger phenomenon. These protons and neutrons cause a hydrogen nuclear-fusion reaction in high pressure/high temperature plasma within a combustion chamber.

FRESHNESS KEEPING MATERIAL

2008-02-09T15:25:00.000-08:00

Publication number: JP2001231524
Publication date: 2001-08-28
Inventor: FUJII TERUTO
Applicant: SEKAICHO RUBBER
Classification:
- international: A23L3/358; A23L3/26; A23L3/3454; A23L3/26; (IPC1-7): A23L3/358; A23L3/26
- European:
Application number: JP20000045527 20000223
Priority number(s): JP20000045527 20000223

esp@cenet document view

Abstract of JP2001231524
PROBLEM TO BE SOLVED: To provide a freshness keeping material generating minus ion and far-infrared rays to keep the freshness of vegetables, etc, and capable of keeping the freshness over a long period by the storage at a low temperature. SOLUTION: A resin composition containing a polymeric compound scarcely accumulating electrostatic charge, a mineral containing rare earth elements and tourmaline and/or a far infrared radiating ceramic is applied and/or laminated to at least a part of a food packaging material selected from a molded resin vessel, a resin film, etc.

Biological activation of inorganic materials: Improving plant growth, or as a feed additive, comprises the use of radiation from an orgone chamber

2008-02-09T15:06:00.001-08:00

Method for biological activation of inorganic materials, e.g. calcium carbonate, useful to provide products for e.g. improving plant growth, or as a feed additive, comprises the use of radiation from an orgone chamber

Publication number: DE10204881
Publication date: 2003-08-14
Inventor: BARTH ADALBERT (DE)
Applicant: BARTH JACQUELINE (DE)
Classification:
- international: A23K1/175; A61K33/06; A61K33/10; A61K33/14; C05F17/00; A23K1/175; A61K33/06; A61K33/14; C05F17/00; (IPC1-7): A61K41/00; A61K33/06
- European: A23K1/175D; A61K33/06; A61K33/10; A61K33/14; C05F17/00H
Application number: DE20021004881 20020205
Priority number(s): DE20021004881 20020205

Abstract of DE10204881
A method for biological activation of inorganic materials (I) involves applying radiation from an orgone chamber onto a metal surface and placing the mineral material (I) under the surface at a pre-determined spacing, so that (I) is subjected to the effects emanating from the orgone chamber and the metal surface. An Independent claim is also included for an orgone chamber for carrying out the process, comprising a vertical hollow body (preferably of square, rectangular or round cross-section) with: (1) vertical walls consisting of an inner electrically conductive layer (preferably of steel sheet) and an outer non-conductive layer; (2) a closed base consisting of a film or sheet (preferably of aluminum, as information matrix); and (3) a closed top consisting of a combination of layers as in (a), covered with a layer or quartz sand.

1. Method for the biological activation of inorganic materials, characterised in that the radiation on a surface made of metal, withdrawing from a Orgonkammer, meets, under this surface mineral materials in a defined spacing by this surface to be stored and the mineral materials of the effect outgoing of the Orgonkammer and the metal surface be thus suspended.

2. Process according to claim 1, characterised in that the materials calcium carbonate, sodium chloride or magnesium sulfate which can be activated represent.

3. Process according to claim 1 and 2, characterised in that those to activating materials loosely or in bags to be packed, individually, secondary or one above the other the effect of the Orgonkammer for biological activation be suspended.

4. Apparatus for the realization of the process according to claim 1, characterised in that the Orgonkammer from senkrechten an hollow body exists, the which in cross section seen preferably squarely, rectangular or approximately trained is, which consist senkrechten of walls of the Orgonkammer at least of two coatings, i.e. an electrical conductive layer arranged inward, preferably from steel sheet and outside electrical a not conductive layer, which is locked Orgonkammer at the lower end by a film or a sheet metal, preferably consisting of aluminum (when information matrix), and the upper end of the Orgonkammer is likewise by a group implemented by coatings, which corresponds to the senkrechten walls and is placed on the Orgonkammer group a coating quartz sand locking above.

5. Apparatus according to claim 1 and 4, characterised in that the sheet metals, which lock the Orgonkammer inside, outside are coated with beeswax.

6. Apparatus according to claim 1 and 4, characterised in that the senkrechten of walls of the Orgonkammer from several electrical conductive and electrical not conductive layers exist and these coatings are alternately arranged.

7. Vorlichtung according to claim 1 and 4, characterised in that the film or the sheet metal, which locks the Orgonkammer down, is surface-moderately so largely implemented that under it comfortably a pallet with several 50 kg bags with inorganic materials can be stored and the place for the storage corresponds to industriellen for biological activation thus approximately that the surface of the film or the sheet metal, which locks the Orgonkammer down.

The invention relates to a method, with which it becomes possible to activate inorganic materials in such a manner that with the inset of these materials on the fields of the agriculture and environmental protection favourable effects are obtained. With the inset in the agriculture z becomes. B. the growth of plants and their root formation affects favourably. In the range of environmental protection it is possible, biological expiration operational sequence z. B. to support during the humus production, as a faster and better rotting of the Kompostiergutes takes place. Introductory it is to be stated that the activated materials in the sense of a biocatalyst become effective. With the most diverse application possibilities still one deals later. Further the invention concerns an apparatus for the realization of the method, i.e. that with the help of the apparatus the treatment of the inorganic substances and thus their biological activation takes place.

It is to be dealt now with the state of the art.

In the German utility model G 90 00 790,5 U1 with the title ?Orgonpyramide? of receiving and using cosmic radiation one speaks. This energy radiation is to represent an alternative to the use of attraction stream, how it comes usually in the medicine to the use. When apparatus becomes the receiving of the cosmic radiation, as it expresses the title to the utility model writing, a pyramid-shaped apparatus uses.

In accordance with G 94 08 068,2 a pyramid-shaped equipment is entered, in order to be able to receive the cosmic radiation. One points out that it is appropriate to implement this equipment in such a manner that the walls exhibit a multilevel structure, i.e. mutual arrangement of electrical conductive and non conductive coatings.

Further is to the DE 296 04 486 U1 referred. There becomes and. A. implemented that so-called Orgon accumulators are used by welfare practical men, in order to use the energy received with these apparatuses in the sense of a Orgonstrahlung. Thus is as alternative to the medicinal used radiotherapy and. A. a suggestion of body-own processes to be caused. The Orgonakkumulator described in accordance with DE 296 04 486 U1 possesses again a structure, with which the walls consist alternately of electrical conductive and non conductive coatings.

In this connection is to be referred also still to a product information 2001 under the title ?in conformity with the universal energy?, whereby it concerns Orgonprodukte here. The Orgonprodukte, z. B. Orgonstrahler, are offered to 7 under the mark MEDEA. These products available in the trade are to promote in principle the human well-being. Items can be reread in the quite detailed product information. Also on other fields the most diverse Orgonprodukte is applicable according to product information. For the example a modified Orgonstrahler, then is called the apparatus, that is a Orgonstrahler with a waterproof casing, in a Gartenteich, Swimmingpool or an aquarium is put. An improvement of the water quality is to be achieved thereby.

Finally is to be referred still to the DE 44 38 340 A1. Apparatuses are described, whose task should be it to use cosmic radiation energy whereby these apparatuses are brought to the respective place of work, in order ?locally? favourable effects to obtain. In the aforementioned patent application becomes and. A. stated that the conversion does not take place from ammonium in stinking ammonia.

In summary can be determined, which was already dedicated to the problem of the use of cosmic radiation energy and the use of the Orgonstrahlung standing thereby in the connection a certain attention. Beside Orgonstrahlern for medicinal tack, which general is to promote said the well-being that to treating persons, in principle comparable solutions are used in the environmental technology, here particularly during the water waste water and liquid manure treatment and in the agriculture. The Orgonstrahler present for medicinal tack in the trade is small and handy and otherwise not usable. The suggested solutions, in the o. g. patent-official writings were stated briefly, assume under use of the Orgonstrahlung the appliances and apparatuses come always to the inset, where it applies general said, to affect the environment. The well-known Orgonstrahler/devices come then at the respective place of work to the use. It does not belong so far to the state of the art to manufacture biological activated materials industrially which are then supplied at the respective place of work of the use.

It is therefore the task of the invention to activate inorganic materials with a economical industrially usable method biological in order to obtain with this in such a manner treated materials in respective case of application on the fields environmental technology and agriculture favourable effects. The appropriate apparatus according to invention is to exhibit a simple structure and to make the treatment possible of large quantities of the inorganic materials concerned.

The task is solved as follows according to invention, whereby regarding the fundamental inventive thoughts to the claim 1 one refers. The further arrangement of the invention results from the claims 2 to 6. The explanation of the invention further remarks are to be made.

A Orgonakkumulator, in the further one than Orgonkammer designation, consists of a perpendicularly arranged hollow body, which is preferably in the cross section rectangular, square or round. The senkrechten of walls consist of at least two coatings, whereby always the internal coating consists the other coating in the hollow body of metal, appropriately of steel sheet, and of electrical non conductive material, preferably felt, Steinwolle or sheep wool. As far as more than two coatings are used, a mutual arrangement takes place from electrical conductive and non conductive coatings. The hollow body is locked down by a film or a thin sheet metal, consisting of metal, preferably from aluminum. The sheet metal is naturally slid into slots, so that it is to be changed if necessary easily. It is to be noted that between the metal on and/or. in the senkrechten walls of the hollow body and the sheet metal for the lower termination no electrical contact exists. The upper termination of the hollow body takes place likewise via mentioned coatings. On these coatings a coating quartz sand is arranged. For the industrial biological activation of the materials the hollow body should be long 6 to 8 m. Its open cross section and thus the surface of the film and/or. the sheet metal, which locks the hollow body down, it is so limited that under the surface comfortably pallets with 50 kg bags with mineral materials can be put down. That is, that the surface of the sheet metal is approximately so large, like the underlying pallet.

In a spacing of approx. 2 m under the Orgonkammer the material which can be activated is stored. An appropriate time for the storing are approx. 6 hours. Depending upon the use it concerns with the mineral materials calcium carbonate, magnesium sulfate or sodium chloride. According to the safety sheet in accordance with EEC guideline 91/155/EWG, point 2, composition/data acts it with the components over

- Natural one, gemahlenes calcium carbonate, CaCO3 (CAS NR. 1317-65-3)
- NaCl sodium chloride (CAS NR. 7647-14-5)
- Magnesium sulfate heptahydrate (MgSO4 x 7H2O), (CAS NR. 010034-99-8)
During the storing of the mineral materials under the Orgonkammer takes place a biological activation of the materials, whereby the results of the activation speak for itself.

The invention is to be described now on the basis embodiments, which occupy the results of the biological activation.

1. Example
Decontamination of poisoned trays, investigational procedure
Into a quantity of 100 m< 3> contaminated earth 5 kg biological activated calcium carbonate are interfered under Wasserzugabe. A control rent with same earth is set without addition of the material. Both silos kompostieren during one period of 4 to 6 months. Then the evaluation of the residual values takes place. With the silo with addition of the aforementioned material completely substantially better values are obtained.

It is referred to table 1.

2. Example
The influence of biological activated calcium carbonate on the health and the growth achievement of pigs:
It concerns in the following the excerpt of an authorized working translation by May 2001 of The University OF Queensland, The Australasian Pig of institutes

Significant results and conclusions in pig production
Study 1

- With bio active fed sucking sows ate more (increase around 12%) and lost during the Laktation fewer weight (18% less).
- With piglets with bio active less frequently Ruhr arose to fed sows on than with piglets at sows, which were not fed with bio active (4.8% compared with 20,0%). The group of the pigs may during the times of the test of no treatment with antibiotics contrary to the control's group, fed with bio active
- The growth rate of the piglets increased by 6%, if the sucking sow with bio active were fed.
- The total improvement of the mast achievement points on the fact that bio active is a suitable fodder additive for sucking sows.
- It has the appearance that the feeding is sucking sows with bio active for the suction piglets of use.
Study 2

- The fodder utilization relationship of the setting off piglets improved by the addition from bio active to the fodder around 7,6%.
- Pigs, the fodder with bio active did not receive, were healthier - Ruhr.
- The total improvement of the mast achievement points on the fact that bio active is a suitable fodder additive for setting off piglets.
3. Example
Out of product informations of the applicant for a patent is to be taken:

a) Product group: Animal fodder additive
Chemical designation: CaCO3
Specification: Permission for ecological animal breeding
Animal species:
Pigs, cattle, poultry, horses, sheep, etc. special successes documented gutachterlich for pigs
Employment recommendation:
200 g bio active animal fodder additive on a ton of dry weight finished fodder for pigs.
With cattle and other animals accordingly to the force fodder
Advantages:
If animal health improves, improves yields;
Pigs:
Nut/mother sow eats better, has more milk, liking ore during the Laktation less off, can be in former times inseminated again.
Piglet:
Fewer stillbirths, get sufficient milk, are healthier, have fall through less and thus fewer deaths.
Traveler:
Receivings after the depositing during Trockenfütterung water with bio active soaking water additive and have a by far better daily increase. Fewer illnesses.
Mastschweine:
Improves fodder utilization and clearly shorter final assembly branch duration (as per. Appraisals of the lehr and laboratory of the country Saxonia-Anhalt 102 days in place of 111 days) of pigs are calm and clean. Improves meat quality, higher lean-meat and low fat portion, altogether fewer illnesses, antibiotic treatments nearly not necessarily.
The increment per pig amounts as per. Appraisal LVA Iden on approx. 6.50 EUR per Mastschwein zzgl. 9 days shorter stable allocation.
b) Product group: Soaking water additive
Chemical designation: NaCl
Specification: Permission for ecological animal breeding
Animal species: Like before in the example 3.a)
Employment recommendation: 1000 g bio active soaking water additive on 30 m< 3> Water for pigs, cattle and. A. Animal species. Also suitably for biological stable cleaning
Advantages: Like before in the example 3.a)
4. Example
Out of production information of the applicant for a patent is to be taken further:

a) Product group: Liquid manure improvement
Chemical designation: CaCO3
Specification: Permission for ecological animal breeding
Animal species: Pigs, cattle, poultry, horses, sheep, etc.,
Employment recommendation: Directly 1000 g bio active liquid manure additive on 100 m< 3> Liquid manure.
In the stable: 20 to 100 g to 100 litres water over the entire stable floor squirts weekly. Moisten well.
Advantages: Swimming and sinking layers dissolve. The liquid manure homogenizes itself. Channels flow off better. Clearly less expenditure for agitating the liquid manure, energy saving, decrease of fly troubles.
Immediately better stable climate. Better Fresslust, fewer lung damage, calm animals, with cattle better milk production, no ammonia smell of the milk.
Drastic decrease of the noxious gases ammonia disappears nearly completely. Methane, nitrous oxide, CO2 are strongly reduced
Nitrogen gain:
Because the plant-available ammonium ticking off (NH4) to the poisonous, stinking ammonia (NH3) is not diminished.
Environment:
The regional environment is not loaded with the removing of the liquid manure by far any longer so strongly by the unpleasant smell.
b) Product group: Kompostierhilfe, humus improvement
Chemical designation: CaCO3
Specification: For Grosskompostieranlagen and garden composting
Uses: In the garden compost, if new material is brought in, something bio active (2-3 Esslöffel per watering can) with water over the material squirts.
Add to the input with Grosskompostieranlagen.
Employment recommendation: 4000-5000 g bio active powders for compost on 100 m< 3> Inputs, with water over the entire inputs squirt.
During plowless treatment of fields squirt after the harvesting 1 kg/ha.
Advantages: Quick and better rotting of the Kompostiergutes. Harvest arrears and roots rot clearly better. Humus improvement in the entire tray. Drastic decrease of the noxious gases and the bad smells. Ammonia disappears nearly completely. Methane, nitrous oxide, CO2 are strongly reduced.
Nitrogen gain: Because the plant-available ammonium ticking off (NH4) to the poisonous, stinking ammonia (NH3) is not diminished.
Environment: The regional environment is not loaded with the shifting and dismantling of the compost rents by far any longer so strongly by the unpleasant smell.
5. Example
Biological activated materials for plants
The activated materials are given separately solved in water as Spritzmittel in tank mixtures without separate processing step or on the field. The quantity required amounts to 1000 g/ha.

Effect
The useful soil bacteria increase, the tray are clearly more warmly, more absorbent and looser due to the aerobic bacteria activity. The humus formation is enormously increased. With useful plants this causes a stronger root growth, a faster maturing and partially completely substantial increments up to 20%. In the cultivation of potato up to 2,2 t increment per hectare were determined. In the plowless cultivation harvest arrears rot quicker and better.

6. Example
Biological activated materials for purification plants
The biological activated materials are suitable outstanding for the use in large and house purification plants as well as for garden and camping toilets.

Effect
Already by the inset of very small quantities the smell load decreases/goes back clearly. In large purification plants bio active within the aerobic range works.

Quantity required
House purification plants 30 g per m< 3>
Large purification plants 2 kg to 100 m< 3>

7. Example
Biological activated materials for waters and ponds
The activated materials are given to lakes and ponds, whose water is often also faulig cloudy and.

One can determine the effect mostly within fewer weeks. The water becomes increasingly clear and the smell decreases/goes back. The alga vegetation decreases/goes back to a biological justifiable measure, the oxygen content of the water becomes clearly higher, water animals returns to an intact habitat.
Quantity required: 1 kg to 400-500 m< 3> Water

8. Example
Biological activated materials for lawns, also for roses and Stauden applicably
Biological activated materials are dissolved in the water and poured over the lawn. After the use and an appropriate impact time the grasses of the turf are strongly promoted in their growth. The plants are more resistant to fungal attack.

Period of the use
February until May Septembers until November

Quantity required
with turfs: 500 g biological activated material on 10 l water, 60-80 g sufficiently per m< 2>
with roses and Stauden: 15-20 g around the plant distribute, in-rake and afterwards land on water.

9. Example
Biological activated materials for the viticulture
An agrarian enterprise in D-06268 Steigra places solid:
The use took place with the sort Grauburgunder on a surface from approx. 0.6 hectars.

To the comparison likewise 0.6 hectars were not treated. Due to the quite late application date an evaluation of the effect in impulse ability and the grape/cluster weight was omitted.

Yield to 15.08.2000, stage 79-81 (end grape/cluster conclusion; ) At the time of the harvesting measuring of the Mostgewichte, in the treated plot, resulted in beginning ripe one a result better around 3 DEG Oechsle.

As grape/cluster suppliers this DEG Oechsle improves 3 substantially our operating result.

10. Example
By the lehr and laboratory for animal husbandry and technology Iden (Saxonia-Anhalt) was compiled in July 2001 a test evaluation with the title ?inset of bio active in the pig mast?, part 1. The summary reads:
In a feeding attempt the inset of bio active became on the efficiency of the pigs examines at 200 Mastschweinen. Two identical compartments were occupied with 100 animals each and along and/or. without bio active additive fed.

In mast performance data at the bio active's group statistical securable improvements showed themselves in the parameters attitude days, fodder utilization and daily increases. Within the range of the battle achievement the bio active's group in the features lean meat portion and meat measure statistical cut off secured with better results.

Altogether the inset of bio active in this attempt clearly positively affected itself.

Further embodiments could be stated due to extensive test results and outstanding references at home and abroad. The past statements with the use of the biological activated materials speak for itself.

Finally is referred to the following.

There both examples partial literal passages from reports and/or. References were taken over, come repeat the term ?bio active? for the treatment substances to the use. It concerns natural the inorganic substances, which were activated after the method according to invention biological.

Kompostieranlage Caaschwitz

Decontamination with bio active powder solution (5 kg m< to 100; 3> Input)
EMI14.1
Kompostieranlage Caaschwitz

Decontamination without bio active powder solution
EMI15.1

Theoretical explanation of the Joe Cell: Jan Wicherink

2008-02-02T18:32:00.000-08:00

Byron New Energy

Orgone accumulation

The Joe Cell, although simple in design, is an incredible device that is able to tap free energy from the universe that can be used to run a car. Many experimenters and researchers around the world have replicated the Joe Cell and maid claims about these cosmic water cells and their anomalies that can not be explained within our current scientific framework and understanding of physics. This article will present a theoretical explanation on how the Joe Cell might work. In order to understand the Joe Cell, we adopt a radical new view on electricity and charge that is not accepted by mainstream physics.

But first let’s explain what a Joe Cell really is. The Joe Cell in its basic design is a set of three cylinders that is submerged in a canister of water. The outer cylinder is a positive terminal and the inner cylinder is a negative terminal with one or more neutral cylinders in the centre. When a 12V DC power supply or car battery is connected an electrolyses process is initiated. When the power is disconnected after 5 minutes of charging, an anomalous ‘cosmic charging’ of the cell continues for days. This process allegedly takes free energy from the universe and ‘stores’ that into the cell. When the Joe Cell is ‘cosmically’ charged, it can be connected to a car engine using no more that a aluminium tube that is being attached to the carburettor, injecting this ‘cosmic’ energy into the cylinder as ‘fuel’ for the engine. With timing of the sparking advanced, the engine will run on this ‘free energy’.

The nature of this ‘cosmic charging’ of the Joe Cell can be explained by Daniel Winter’s implosion physics. We’ll explain, what this ‘free energy’, actually is and how it can be harnessed. Harold Puthoff has termed it the zero point energy from the vacuum from his discoveries of quantum science. This zero point energy has been discovered many times before and has been given many names such as Orgone energy (Wilhelm Reich) and Tachyon energy. This energy has been known to mankind since time memorial, the ancients called it ‘Chi’ (Chinese), ‘Ki’ (Japanese) or Prana (Indian). Modern day science is just catching up with ancient wisdom and rediscovering it as zero point energy. Let’s call it the energy of life, as Wilhelm Reich discovered it, it’s the energy that animates and gives life to every living specie on earth, whether it be plant, animal or human. It’s the same energy that gives ‘life’ to the Joe Cell as it harnesses this life force or Orgone energy from the universe.

Implosion physics

To understand the free zero point energy of the universe, is to understand the ancient cosmologies and the nature of our universe. The ancients believed that he universe consists of a vibrating sea of energy, the ether that is all around us. The material world does not exist of separate particles that we call matter, but instead is created from standing waves in the ether. This ancient view of our universe is best explained in a novel physics called ‘implosion physics’ by Daniel Winter, who is an expert in sacred geometry, an ancient science and philosophy that can be traced back to the Egyptians.
Daniel Winter’s implosion physics describes matter as a self sustaining arrangement of imploding vortexes in the ether. The atom is simply the geometrical arrangement of these vortexes. Each vortex corresponds with what mainstream physics regards to be an electron particle. When the imploding vortexes are arranged according to the Platonic Solids, the electron shells and their magnetic quantum numbers, the number of electrons in a shell (2, 6, 10, 14) emerge naturally from the symmetries of these geometrical forms. Nest these Platonic Solids one into the other to form fractals, and we have a model of the atom existing of different electron shells = fractal or nested set of Platonic Solids.

The Platonic Solids were mentioned by Plato 300 BC and he equated these solids to the five elements fire (tetrahedron), air (octahedron), earth (cube), water (icosahedron) and the ether (dodecahedron). Remember that Plato equated the icosahedron to water and we’ll show you how right he was!

Now just for a moment image the universe to be electrical in nature and imagine all matter to actually exist of these imploding vortexes, then the universe is basically a matrix of electromagnetic waves imploding into what we call matter. The matrix itself consists of interwoven Platonic Solids geometries. When waves are nested within waves from long to short wave lengths, everything gets interconnected, galaxies, planets, molecules, atoms and subatomic particles.

The matrix exists of spiralling electromagnetic energy waves that interfere non-destructively into a zero or still point within the atom. The imploding effect is what we observe as gravity as these waves not only pack together in the implosion to form matter, but also speed up to reach superluminal speeds.
To visualise an imploding vortex just imagine the little whirlpool that is created when you pull the plug in your bathtub, feel the suction of the whirlpool as it attracts everything into its funnel. This is what the imploding ether vortex of electromagnetic energy does; it sucks in matter creating gravity. It’s also the key to zero point energy, since in the zero still point the energy density has become infinitely high!

Torsion fields

According to Dan Winter this is the relation between electromagnetism and gravity that Einstein was looking for. Russian scientists call these imploding electromagnetic energy fields, torsion fields. The spiralling wave that spirals into the zero still point is the torsion wave. Tapping the zero point energy from the universe is tapping the energy from the matrix of energy that makes up our physical reality! It’s tapping the energy from gravity itself!

In the fifties Dr. Hans Jenny demonstrated with his Cymatics experiments using simple sound waves that all of the Platonic Solids emerge as standing wave interference patterns in spherical volumes. The Platonic Solids are the blueprint for the self organising universe. The spiralling imploding waves in a vortex also create these Platonic Solids as standing wave patterns. The implosion is simply a set of these nested or fractal Platonic solids as wave interference patterns.

Cymatics experiments icosahedron on the left, star tetrahedron on the right

This is the reason why geometric forms like the Platonic Solids are able to resonate with the energies of the universe. Russian science calls them passive torsion field generators. This is the secret of the Great Pyramid of Giza that is actually half an octahedron and is able to resonate with the torsion fields of the Earth. The Earth’s electromagnetic energy matrix, called the Earth grid consists completely of these nested Platonic Solids. The Platonic Solid energy grids of the atom simply locks into the larger Platonic Solids of the energy grid of the Earth, which in term locks in the energy matrix of the dodecahedral zodiac and the dodecahedral energy grid of the universe at large (from the latest Hubble space telescope observations). This makes up the matrix of our physical reality.

Picture Dan Winter (www.soulinvitation.com)

The ancients understood all of this very well. It’s the secret of geomancy, Feng Shui, the art of channelling and balancing the Chi energy of the universe. By creating geometrical patterns on the land, resonance is created with the geometrical patterns of the energy matrix of our universe!

Capacitors

Now here’s a radical shift from our current understanding of capacitors which has not yet been accepted by mainstream physics.

A capacitor creates a classical static electrical field when charged. According to Tom Bearden this classical static electrical field is not static at all! In reality the charged capacitor creates a dynamic electromagnetic field that radiates from this capacitor and dynamically interacts with the vacuum energies, the zero point field. The ‘static’ electrical field is simply a dynamic equilibrium of virtual photon emissions with the vacuum. What is perceived as a static electric field is therefore a steady state dynamic flow of electromagnetic energy exchanged with the vacuum.

Daniel Winter takes Bearden’s interpretation of charge as a dynamic electromagnetic interaction with the zero point field of the vacuum even further. Winter adds the required geometry for these electromagnetic waves and shows us how the charge compression of this capacitor is created from the implosion of these electromagnetic waves. It’s the charge compression or the electromagnetic implosion that creates the voltage in a static electrical field.

According to Dan Winter the electromagnetic energy of a capacitor arranges itself in Golden Mean ratio frequencies of EM waves along Platonic solid geometries that allow these waves to implode to a zero still point. Winter’s calls this implosion of electromagnetic energy a charge compression. The electron in Winter’s implosion physics is an imploding vortex in the atom. These vortexes are aligned in Platonic Solid symmetries and their funnels all join in the nucleus of the atom. The charge compression is from negative charge to positive charge when imploding in the electromagnetic vortex. In Winter’s implosion physics there are no particles, no electrons and no protons, the electron-proton pair is this imploding electromagnetic vortex. Since the charge compression in the vortex takes place from negative charge to positive charge, from outside the atom towards the nucleus, this is why the positive ‘proton’ particles are found in the nucleus and the negative ‘electrons’ are found in the shells of the atom.

The Joe Cell is just one big capacitor creating an internal vortex field when initially being charged with 12 Volts.

Structured water

With this introduction into ancient wisdom and modern day implosion physics, we can now start to explore the properties of water and start to understand how the Joe Cell may harness this free energy from the vacuum of space. The secret of water is that it is able to conduct the Chi, Orgone or zero point energy from the universe using the same ancient geomancy principles, the art of Feng Shui: resonance through geometrical form! The Joe Cell mimics the ability of our own body cells to harness the life force, the Chi, zero point or Orgone energy from the universe using these resonance principles.

It has been known for quit some time that water can form internal structures when the hydrogen atoms of one water molecule start to bond with the oxygen atom of another water molecule. Although the water molecule is electrically neutral, its charge is not dispersed equally along the molecule. Water molecules are actually small dipoles since the bigger oxygen atom in the H2O water molecule attracts the valence electrons harder than the much smaller hydrogen atoms. The result is that the hydrogen becomes somewhat positively charged and the oxygen atom becomes negatively charged. This dipole effect allows water molecules to form chains of molecules. The positively charged hydrogen atoms bond with the negatively charged oxygen atoms of another H2O molecule. The hydrogen bonding in normal water is very instable and these connections last only picoseconds. So water is constantly dynamically rebuilding these internal structures as a result of the thermic vibrations of the water molecule. Only at temperatures below zero do the hydrogen bonds become stable enough to form ice crystals.

A recent theory by Martin Chaplin Professor of Applied Science Water and Aqueous Systems Research of the London South Bank University demonstrates that water molecules can arrange themselves in various structures and configurations based on the icosahedron. The most amazing structure is a super icosahedral structure that exists of 13 smaller icosahedral structures with a total of 1820 water molecules:

Icosahedral super water cluster of 1820 H2O molecules

Chaplin’s model of the molecular structuring of water is able to explain many of the anomalous properties of water, such as its expansion between 0 en 4 degrees, its high boiling point and many other strange properties that makes water such a rare fluid. So what this theory shows is that water dynamically creates these super icosahedral clusters to give water its exclusive properties.

Now here’s the secret of water in relation with Orgone energy, these icosahedral structures resonate with the zero point energy through form! They are the waveguides that allow the zero point energy to implode. The icosahedral water clusters simply, nest or fit recursively into the fractal matrix of imploding waves that sustains matter, i.e. the atoms of the water molecules. According to Daniel Winter, the implosion of this electromagnetic energy into matter is what we observe as gravity. So in other words the icosahedral structure is a wave guide for the imploding Orgone energy, allowing super conductance of these imploding waves, which is just another word for this non-destructive Golden Mean based electromagnetic implosion. What happens in the water is that a vortex of imploding electromagnetic energy is being created, drawing this Orgone, or Chi energy from the universe into the water. Just think of it as an ether vortex or whirlpool that is sucking in ether and it is this suction of the ether wind is that we experience as gravity.

It’s my hypothesis that when the Joe Cell is electrically charged using a 12V battery, the cylindrical charge field will create an electromagnetic vortex that will act as a catalyst and stimulate the formation of more of these naturally appearing icosahedral super water clusters. When a critical threshold is reached and enough of the water molecules have bonded into these super clusters, the ‘cosmic charging’ of the Joe Cell becomes self steering. In reality no energy is stored inside the Joe Cell; the Joe Cell merely acts as a super conductor of this free energy, the Orgone, Chi or zero point energy of the universe that will freely flow through the water. It has become a superconductor of this energy. The Joe Cell most likely mimics a biological organic cell that draws the same Orgone energy into it using the same mechanisms. Science has proven that the water inside a biological cell is organised differently from the water outside the cell. This is the Chi or life force energy of the universe that animates all biological life.

Orgone and consciousness

I postulate that human consciousness has its effect on the clustering of the water molecules. It’s been known by Joe Cell builders that their emotions and intentions have an effect on the Joe Cell, this effect has been become known as the Y factor in the Joe Cell experiments.

In the late fifties, Russian scientist, Nikolai Kozyrev has proven that human thoughts and emotions relate to torsion fields. Torsion fields or vacuum domains as the Russians tend to call them are the same electromagnetic imploding vortexes in the vacuum of space that are being created in the Joe Cell. This is why negative feelings and emotions will interfere with the ‘cosmic charging’ of the cell.

At Heart Math institute Daniel Winter has proven that e-motion is actually an implosion of electromagnetic energy from the heart and mind when coherence is reached between the EEG and the ECG. Feelings of love will harmonically entrain brain and heart waves by Golden Mean ratio related frequencies in the frequency spectrum of the EEG and ECG. This will create an imploding vortex in the energy field around the person. This effect which creates Kozyrev’s conscious torsion field, may also explain why Masaru Emoto’s water crystals are influenced by thoughts and emotions. Masaru Emoto is a Japanese scientist who has proven that the formation of ice crystals from water samples can be altered by human intention.

It’s noteworthy that all of Masaru Emoto’s water samples that stem from natural and unpolluted water sources as well as those that have been administered positive human intentions, form ice crystals with a hexagonal core. It’s only from pure, natural spring water or water that has been treated with love that these beautiful hexagonal ice crystals are being created. In all other cases, the ice crystals are chaotic.

The ice crystals with a single hexagonal core have fractal structures at the vertices of the hexagon, often being hexagonal structures themselves. In reality the hexagon in Masaru’s water crystal is the top view of an icosahedron:

The hexagon in the icosahedron

Masaru Emoto research on this hexagonal or icosahedral structured water has shown that this water has abilities to transfer what he has coined ‘Hado’ or the vital energy of the universe. Now isn’t Hado just the Japanese term for Orgone that Wilhelm Reich discovered? Masaru Emoto’s research seems to acknowledge the abilities of water to act as a superconductor for this cosmic energy once the water itself gets structured. Masaru Emoto’s research has shown that:

Hexagonal structured water appears in natural clean water sources
Ordinary water such as tap water can be changed into hexagonal structured water by positive and loving human intentions.
Hexagonal structured water can be artificially created using scalar waves or torsion fields.

There is a Dutch psychic woman by the name of Woutje Winkler-Prins who’s been paranormally receiving information from her spiritual guides about geometrical forms that supposedly impose ‘healing faculties’ on water. She’s been creating her ‘structured water’ using geometrical forms drawn on paper for at least 20 years now and the latest geometrical form that she has been using to create her Donave trademark water is this:

Woutje’s geometrical form icosahedral super water cluster

The similarity between the two images is striking. Pay especially attention to the number of rings in both diagrams and the trapezium like shapes in the outer ring with the double loops. Could it be that this woman has been intuitively receiving information about hexagonal or icosahedral structured water?

Biefeld Brown effect

We explained in great detail above how the Joe Cell draws in Orgone energy from the universe, but the most important question is still left unanswered; how can this cosmic energy fuel a combustion engine? Before we can answer that question there is one more thing we need to understand; the Biefeld Brown effect.

If gravity is indeed electromagnetic in nature and can be explained by imploding electromagnetic vortexes, we should be able to reverse the natural process of gravity making and create anti-gravity and thrust that can levitate and propel vehicles and aircrafts. According to Paul La Violette this kind of propulsions from electrogravitics has already been applied in the B2 Stealth bomber. This airplane uses a high voltage between its wings leading edge and its jet exhaust. The electrogravitic thrust created from this voltage is called the Biefeld-Brown effect, named after its inventors Thomas Townsend Brown and Paul Alfred Biefeld.

The Biefeld-Brown effect is an anti-gravity effect created by high voltage charged asymmetric capacitors. Jean Louis Naudin of Jlnlabs (http://jnaudin.free.fr/) and Tim Ventura of American Antigravity (www.americanantigravity.com) have built flying models from these asymmetric capacitors that are able to create real thrust and antigravity effects. These models are able to lift off the ground, hence their name ‘lifters’. In addition Jean Louis Naudin has built a modeller flying sourcer using the same principles and technology of asymmetric charge distribution. A flying source creates real trust by applying a high voltage between the top and bottom of the craft. (http://jnaudin.free.fr/html/ehdfsv3.htm).

There is still a dispute going on on the internet about these lifters whether or not the thrust produced by the lifters can be explained by conventional physics (electrohydrodynamics). At Blazelab laboratories they are convinced that the thrust created by the lifter can be explained by the ionisation of air molecules. The thrust is created from this ion-wind when the ions rush from the anode to the cathode. And indeed if the propelling force of the lifter is this ionized air, the lifters should not work in vacuum conditions. There’s controversy whether or not the lifters work in the vacuum. At Blaze laboratories tests have proven they don’t, however other experiments conducted at Purdue University showed the same anti gravity effect even in vacuum conditions. Experiments with these lifters enclosed in plastic bags have proven that these models will still fly. Since these lifters can no longer create a net ion-wind, it invalidates the ion-wind theory.

This mysterious Biefeld-Brown effect can be explained by Dan Winter’s implosion physics if we understand the fact that a static electric field in reality is an imploding electromagnetic field, or torsion field that is able to create real thrust. At a cosmic scale this effect creates planetary gravity as electromagnetic waves spiral in from outer space into the planets. There’s a growing support for the theory that our universe is electromagnetic in nature and that planets and stars are charged bodies too, exchanging electromagnetic energy and in doing so are creating gravity. (www.holoscience.com)

Energy converted to thrust

It’s my assumption that the Biefeld-Brown effect as an implosion of electromagnetic energy is driving the piston in the cylinder of the Joe Cell.

When the Orgone charged Joe Cell is connected to the carburettor of the engine, this breeding cell has already created a strong vortex, torsion field or imploding electromagnetic field, all synonyms for this Orgone energy, around it.

The initial vortex is created by the 12V power supply that will create a vortex imploding upwards since the negative pole is attached to the bottom of the inner cylinder of the cell, while the positive pole is attached at the top of the outer cylinder of the cell. As a result an electromagnetic vortex is created that is imploding from the bottom of the cell to the top, from negative to positive charge. When the cell starts breeding it will start attracting Orgone energy because the icosahedral water molecules in the water arrange themselves along this vortex and will sustain that vortex and charge of the cell even when the 12V power supply is disconnected. This is typical for a stage 3 Joe Cell; the water will remain charged even after the power supply has been disconnected.

When the cell is connected to the engine at the carburettor, we actually create two capacitors that are connected in parallel. The Joe Cell is the first and largest capacitor and holds a charge that is continuously replenished from the zero point field. The second capacitor is the spark plug of the engine. The mass of the engine is the common ground of both capacitors. The bottom part of the Joe Cell and the centre terminal of the spark plug are the negative terminals, the engine is the positive terminal. There’s no physical connection between the Joe Cell and the engine. The Joe Cell is build into the engine compartment completely insulated from the car itself. The cell and engine need to be flashed initially meaning the negative lead of car battery is initially attached to the negative terminal of the cell and the positive lead is arced a few times at the engine. This way the engine will be positively charged. This process is very important to create a capacitor bridge between the Joe Cell and the engine, the conductor for the Orgone energy!

When the spark plug is ignited, negative charge starts to build op on the inner centre electrode of the spark plug. Upon the build up of this charge, the spark plug and the Joe Cell will create imploding electromagnetic vortexes into the engine. The Joe Cell’s vortex will spiral through the carburettor and into the cylinder. The spark plug’s vortex will spiral from the spark plug’s inner negative electrode into the cylinder of the engine. Remember, the electromagnetic implosion always occurs from the negative to the positive charge!

The result is two spiralling vortexes creating a donut shaped implosion inside the engine! Due to the asymmetry of both vortexes, a net thrust is created on the piston. It’s this Biefeld Brown effect that will push the piston upwards. This is why the timing of the ignition needs to be advanced! Each time the spark ignites, Orgone energy is channelled in tremendous amounts from the Joe Cell in energy bursts that will create this thrust on the piston. The replenishment of this energy is from the zero point field of the universe. The Joe Cell will only function as a super conductor of this free energy and never will run out of it.

The gas pedal and throttle will still operate as a regulator because the flux of Orgone energy originating from the Joe Cell can be controlled by it. When the engine runs on Orgone the throttle does not regulate the air intake, but the Orgone intake. By opening or closing the throttle, we change the flux of the Orgone energy that can pass through the carburettor. The flux of Orgone energy is maximized when the imploding electromagnetic energy takes place in air and will be significantly reduced when the Orgone energy will have to pass through metal.

Predictions

The engine running on a Joe Cell will not stop when the engine is oxygen starved since Orgone will not require oxygen. It will be proof that the engine is not running on the hydrogen generated from the Joe Cell as a ‘conventional’ fuel.

Since no combustion and internal explosion is taking place in the cylinder, no substantial heat is being created. However some heat is being created in the compression stroke from the adiabatic process due to the compression of the air. Therefore the exhaust fumes of the car will be lukewarm instead of hot and contain no traces of water vapour as a result of hydrogen burning.

When the timing of the ignition is delayed, the engine will not run. Running on Orgone energy will require an advanced timing. Engines running on hydrogen or gas will keep running even when the timing of the ignition is late.

The operation of the Joe Cell can be negatively influenced by external electrical and magnetic fields as it will distort the imploding vortex field of the Joe Cell.

Human emotions and negative thoughts will have an impact on the Joe cell as the torsion fields emanating from human consciousness will interact with the torsion field of the Joe Cell. Using negative concentrated thought and intentions could disable the Joe Cell.

When the spark plug polarity is reversed, the implosion effect will be enhanced and may even become devastating to the engine.

Note: The effects mentioned in 2, 4 and 5 have already been confirmed by experiments.

Download PDF document

download PDF

References

Joe Cell interview Peter Stevens of Byron New Energy:
http://pesn.com/2006/04/27/9600265_Make_Run_Joe_Cell/

Charge compression, implosion physics in water, Daniel Winter: http://www.soulinvitation.com/watercharged/

Gravitational thrust produced by capacitors which accelerate charge by recursion
http://www.soulinvitation.com/thrust/

Hydrogen bonding and memory effect of water:
http://www.chem1.com/acad/sci/aboutwater.html

Icosahedral water clusters. Martin Chaplin:
http://www.lsbu.ac.uk/water/
http://www.lsbu.ac.uk/water/icosahedra.html

Dr. Emoto’s hexagonal water:
http://www.hado.net/indigo_water.html

Torsion fields, Nikolai Kozyrev:
http://ascension2000.com/DivineCosmos/01.htm

E.H.D. Flying Sourcer, Jean Louis Naudin:
http://jnaudin.free.fr/html/ehdfsv3.htm
http://jnaudin.free.fr/html/ehdfscs.htm

Vortex gravity control, Paul Richard Price, 2004 :
http://www.americanantigravity.com/paul-price-article.shtml

Source charge problem, Tom Bearden:
http://www.cheniere.org/techpapers/Fact_Sheets/Fact%20Sheet%20-%20Source%20Charge%20Problem10.doc

Electrogravitics Systems, Paul La Violette
http://www.etheric.com/LaVioletteBooks/Book-ES.html

Biefeld-Brown effect:
http://www.americanantigravity.com/Lifter-Article.pdf

Blaze labs research, lifters in the vacuum
http://blazelabs.com/l-vacuum.asp

The electric universe:
http://www.holoscience.com

Cymatics, Hans Jenny
http://www.cymaticsource.com/

Woutje Winkler-Prins and Donave water:
http://www.nulpuntenergie.net/dng/donave.htm

Kozyrev: Aether, Time and Torsion

2008-02-02T18:17:00.000-08:00

Sepp Hasslberger: Kozyrev: Aether, Time and Torsion

The Russian scientist Dr Nikolai Kozyrev is in many ways a forerunner - the father of today's efforts to re-interpret physics in a way that does not contradict intuitive understanding. Our efforts to reconcile the inherent contradictions of the standard model of physics, firmly based as it is on Einstein's relativity and Quantum Mechanics, have brought less than satisfying results.

N.A. Kozyrev - Image credit: schools.keldysh.ru

Kozyrev has measured spin or torsion field effects at a time when Western science was busy smashing atoms into ever smaller fractions. He investigated time and the aether before most of us in the West ever thought of questioning the workability of our modern interpretations of the universe.

A most welcome effort to increase our awareness of Kozyrev's outstanding work is a book chapter on David Wilcock's site, which introduces him with the following words:

Dramatic scientific evidence that all of physical matter is formed by an “aether” of invisible, conscious energy has existed since at least the 1950s. Renowned Russian astrophysicist Dr. Nikolai A. Kozyrev (1908-1983, pronounced Ko-zir-ev,) proved beyond any doubt that such an energy source had to exist, and as a result he became one of the most controversial figures in the history of the Russian scientific community. The awesome implications of his work, and of all those who followed him, were almost entirely concealed by the former Soviet Union, but with the fall of the Iron Curtain and the advent of the Internet we are finally gaining access to “Russia’s Best-Kept Secret.” Two generations of remarkable research by thousands of Ph.D. level specialists have emerged from Kozyrev’s seed findings, which completely change our understanding of the Universe. With our prominent mention of him in this book, we hope to permanently establish his historical importance and impact to our colleagues and readers.

After having heard of Kozyrev in the 90s, I came upon his name again in a recent issue of NEXUS magazine, where a summarized version of David Wilcock's book chapter is published under the title: The Aether Science of Dr N. A. Kozyrev. That short version, published in NEXUS, is copied here:

- - -

THE AETHER SCIENCE
OF DR N. A. KOZYREV

by David Wilcock @ 2006

(a more extensive version of this article can befound here)

Dramatic scientific evidence that all of physical matter is formed by an "aether" of invisible, conscious energy has existed for decades.

Renowned Russian astrophysicist Dr Nikolai A. Kozyrev (1908-83) proved beyond any doubt that such an energy source had to exist, and as a result he became one of the most controversial figures in the history of the Russian scientific community.

The awesome implications of his work, and of the work of all those who followed him, were almost entirely concealed by the former Soviet Union, but with the fall of the Iron Curtain and the advent of the Internet we are finally gaining access to "Russia's best-kept secret". Two generations of remarkable research by thousands of PhD level specialists has emerged from Kozyrev's seed findings, which completely change our understanding of the Universe.

An unseen medium of energy

The aether's existence was widely accepted without question in scientific circles until the early 20th century, when the Michelson-Morley experiment of 1887 was co-opted to "prove" that no such hidden energy source existed.

However, more recent breakthroughs involving "dark matter", "dark energy", "virtual particles", "vacuum flux" and "zeropoint energy", to name a few, have brought reluctant Western scientists to acknowledge that there must indeed be an unseen energy medium throughout the Universe. As long as you use a benign term like the "quantum medium" and not the forbidden word "aether", you can talk about it in the mainstream press without much fear of ridicule.

One early example of proof for the existence of the aether comes from the respected physicist Dr Hal Puthoff. He frequently mentions experiments from the early 20th century, conducted before quantum mechanics theory even existed, that were designed to see if there is any energy in "empty space". In order to test this idea in the laboratory, it was necessary to create an area that was completely free of air (a vacuum) and lead-shielded from all known electromagnetic radiation fields by using what is known as a Faraday cage. This airless vacuum space was then cooled down to absolute zero or -273°C, the temperature where all matter should stop vibrating and thus produce no heat.

These experiments proved that instead of an absence of energy in the vacuum, there is a tremendous amount of it, from a completely non-electromagnetic source!

Dr Puthoff has often called this a "seething cauldron" of energy in very high magnitudes. Since this energy could still be found at absolute zero, this force was dubbed "zero point energy" or ZPE, whereas the Russian scientists usually call it the "physical vacuum" or PV.

Established mainstream physicists Dr John Wheeler and Dr Richard Feynman calculated that the amount of zero-point energy in the space volume of a single light bulb is powerful enough to bring all the world's oceans to the boiling point!

Clearly, we are not dealing with some weak, unseen force but, rather, a source of almost impossibly grand power which would have more than enough strength to sustain the existence of all physical matter.

In the new view of science that is emerging from aether theory, all four of the basic force fields, whether gravity, electromagnetism, weak nuclear force or strong nuclear force, are simply different forms of the aether/ZPE.

Professor M. T. Daniels found that the density of the gravitational energy near the surface of the Earth is equal to 5.74 x 10¹⁰ (t/m³). (Let us not forget that gravity would simply be another form of aether in this new model.) Prof. Daniels's finding means that drawing a sizeable 100 kilowatts of this "free energy" power from the gravitational field dips into an extremely tiny 0.001 per cent of the natural energy that is being produced in that area. (See New Energy News, June 1994, p. 4.)

Research conducted by Dr Nikola Tesla led to his statement in 1891 that the aether "behaves as a fluid to solid bodies, and as a solid to light and heat", and that under "sufficiently high voltage and frequency" it could be accessed - which was his hint that free energy and antigravity technologies are possible.

Let us pay special attention to Tesla's statement that the aether has a fluid-like effect when we are dealing with solid objects, as this ties in directly with the work of Dr N. A. Kozyrev.

Rethinking matter

In order to truly grasp Kozyrev's work and related findings, certain new analogies for physical matter are required. Kozyrev's work forces us to visualise all physical objects of matter in the Universe as if they were sponges submerged in water. In this analogy, we should consider the sponges as having remained in water for a long enough period of time that they are completely saturated. Bearing this in mind, there are two things we can do with such sponges underwater: we can decrease the volume of water that they contain or increase it by very simple mechanical procedures.

1. Decrease: If a submerged, saturated sponge is squeezed, cooled or rotated, then some of the water inside of it will be released into its surroundings, decreasing its mass. Once the sponge is no longer disturbed, the pressure on the millions of tiny pores is relieved, causing it again to absorb water and expand back to its normal resting mass.
2. Increase: We can also pump more water into the sponge in its rest state, such as by heating (vibrating) it, thus causing some of the pores to expand with more water than they can comfortably hold. In this case, once we relieve the added pressure, the sponge will naturally release its excess water and shrink back down to its normal resting mass.

Though it would seem impossible to most people, Kozyrev showed that by shaking, spinning, heating, cooling, vibrating or breaking physical objects, their weight can be increased or decreased by subtle but definite amounts. And this is but one aspect of his amazing work.

Dr Kozyrev's background

Since the Western world is largely uneducated about Kozyrev, some biographical and research information is in order. Far from a being a "crank" or "crackpot" scientist, he was in fact considered one of the pre-eminent Russian thinkers of the 20th century. Kozyrev had his first scientific paper published at the tender age of seventeen, and other scientists were amazed by the depth and clarity of his logic. His main work was in astrophysics, where he studied the atmospheres of the Sun and other stars, the phenomenon of solar eclipses and radiation equilibrium. By age twenty he had already graduated from the University of Leningrad with a degree in physics and mathematics, and by age twenty-eight he was widely known as a distinguished astronomer who had taught at several colleges.

Kozyrev's abundant life took a most unfortunate and difficult turn in 1936, when he was arrested under the repressive laws of Josef Stalin, and in 1937 he began 11 torturous years enduring all the known horrors of a concentration camp. In this state, he mused deeply upon the mysteries of the Universe, paying attention to all the patterns that exist in life, wherein so many different organisms show signs of asymmetry and/or spiralling growth. From his illuminated observations, Kozyrev considered that all life-forms might be drawing off an unseen, spiralling source of energy, in addition to their normal properties of gaining energy through eating, drinking, breathing and photosynthesis.

Kozyrev theorised that things such as the direction of a shell's spiralling growth and which side of the human body will contain the heart are determined by the direction of this flow. Should there be an area somewhere in space-time where the energy flow spiralled in the opposite direction, then he would expect shells to grow in the opposite direction and the heart to be in the opposite side of the body cavity. Kozyrev suggested that life couldn't form in any other way, because it is actively drawing off this spiralling energy to sustain itself and must therefore follow its proportions every step of the way. In this sense, we can think of the skeletal system as an "antenna" for this energy.

When Kozyrev was finally rehabilitated from the prison camp in 1948 and could return to his field of expertise, he made many predictions about the Moon, Venus and Mars, which were validated by Soviet space probes more than a decade later. This then earned him the distinction of being a major pioneer in the Soviet space race. In 1958, Dr Kozyrev again aroused worldwide controversy by proclaiming that the Moon exhibits volcanic activity in the Alphonsus crater.

US Nobel Prize winner Dr Harold Urey was among the small group who believed that Dr Kozyrev's theory of volcanic activity on the Moon is correct, and he urged NASA to conduct an investigation. As a direct result, NASA launched the enormous Moon Blink project, which later confirmed Dr Kozyrev's assertions by finding significant gas emissions on the Moon.

However, not all of Kozyrev's work was quite so readily assimilated into the mainstream world of NASA.

The science of time

In the winter of 1951-52, Dr Kozyrev began his foray into the world of exotic physics, with the first of what became an exhaustive series of 33 years' worth of very intriguing and controversial experiments. As we said, the spiralling energy patterns in nature unveiled themselves to the initiated eyes of Dr Kozyrev while in the concentration camp. His "direct knowledge" informed him that this spiralling energy was in fact the true nature and manifestation of "time".

Obviously, he felt that "time" as we now know it is much more than just a simple function for counting duration, Kozyrev urges us to try to think of a cause for time, something tangible and identifiable in the Universe that we can associate with time.

After pondering this for a while, we see that time is ultimately nothing but pure, spiralling movement. We know that we are tracing a complex spiralling pattern through space thanks to the orbital patterns of the Earth and solar system.

And now, "temporology", or the science of time, is under continual active investigation by Moscow State University and the Russian Humanitarian Foundation, inspired by Dr Kozyrev's pioneering work. On their website, they state:

"In our understanding, the 'nature' of time is the mechanism [that brings about] appearing changes and occurring newness in the world. To understand the 'nature' of time is to point to ... a process, a phenomenon, a 'carrier' in the material world whose properties could be identified or corresponded with those of time."

This may seem strange at first glance, since a tree falling in your yard could be seen as a result of a strong wind, not of the "flow of time". However, you must then ask yourself what caused the wind to blow. Ultimately, the motion of the Earth on its axis is most responsible. Hence, all changes are caused by some form of movement, and without movement there can be no time.

Several of the scholars whose papers are published through the Russian Institute of Temporology agree that if Kozyrev had changed his terminologies and use of the word "time" to more common scientific terms such as "the physical vacuum" or "the aether" , then many more people would have been able to understand his work sooner in the ensuing years.

Torsion physics

In 1913, Dr Eli Cartan was the first to demonstrate clearly that the "fabric" (flow) of space and time in Einstein's general theory of relativity not only "curves", but it also possesses a spinning or spiralling movement within itself known as "torsion".

Most people are unaware that it is now generally accepted that the space surrounding the Earth and perhaps the entire galaxy has "right-handed spin", meaning that energy is influenced to spin clockwise as it travels through the physical vacuum.

According to Sciama et aI., static torsion fields are created from spinning sources that do not radiate any energy. However, once you have a spinning source that releases energy in any form, such as the Sun or the centre of the galaxy, and/or a spinning source that has more than one form of movement occurring at the same time, such as a planet that is rotating on its axis and revolving around the Sun at the same time, then dynamic torsion is automatically produced. This phenomenon allows torsion waves to propagate through space instead of simply staying in a single "static" spot. Thus, torsion fields, like gravity or electromagnetism, are capable of moving from one place to another in the Universe.

Furthermore, Kozyrev proved decades ago that these fields travel at "superluminal" speeds, meaning that they far exceed the speed of light. If you can have an impulse that moves directly through the "fabric of space-time", travels at superluminal velocities and is separate from gravity or electromagnetism, you have a significant breakthrough in physics - one that demands that a "physical vacuum", "zero-point energy" or an "aether" must really exist.

Torsion field experiments

Dr Kozyrev's experiments began in the 1950s and were conducted since the 1970s with the ongoing assistance of Dr V. V. Nasonov, who helped to standardise the laboratory methods and the statistical analysis of the results. Detectors using rotation and vibration were specially designed and made that would react in the presence of torsion fields, which Kozyrev called the "flow of time".

It is important to remember that these experiments were conducted under the strictest conditions, repeated in hundreds or in many cases thousands of trials and were written about in extensive mathematical detail. They have been rigorously peer-reviewed, and Lavrentyev and others have replicated the results independently.

Going back to our earlier analogy, we said that matter behaves somewhat like a sponge in water. If we do something to disturb the structure of the sponge, such as squeeze it, spin it or vibrate it, then it will release some of its water back into its environment.

Over the years, all of the following processes were discovered to create a "time flow" of torsion waves in the laboratory, due to their disruption of matter in some form: the deforming of a physical object; the encounter of an air jet with an obstacle; the operation of an hourglass filled with sand; the absorption of light; friction; burning; the actions of an observer, such as a movement of the head; the heating or cooling of an object; phase transitions in substances (frozen to liquid, liquid to vapour, etc.); dissolving and mixing substances; the fading death of plants; nonlight radiation from astronomical objects; and sudden changes in human consciousness. Other than the perplexing final item related to consciousness, we can readily see how each process is disturbing matter in some way, thus causing it to absorb or release minute amounts of its aetheric "water", which fits perfectly with our sponge analogy.

Even more importantly, the fact that strong emotional energy could also cause a measurable at-a-distance reaction has been repeatedly documented not just by Dr Kozyrev but many others, and this is where our concepts of psychic phenomena and consciousness come into the picture.

Such concepts became even bigger news after the September 11, 2001 terrorist attacks on the United States, when Dean Radin and his team at the Institute of Noetic Sciences were able to measure a tremendous change in the behaviour of computerised random-number generators surrounding the time immediately before and after the attack.

The data show that, somehow, a change in the mass consciousness of humanity affected the behaviour of electromagnetic energy in computer circuits around the world, especially those computers nearest to North America. This suggests that torsion waves and consciousness are essentially identical manifestations of intelligent energy.

Aiding and shielding torsion effects

Returning to the more "comfortable" arena of physical matter, Kozyrev's work showed that torsion fields can be absorbed, shielded or sometimes reflected. For example, sugar can absorb, polyethylene film and aluminium can shield and other forms of aluminium or mirrors can reflect.

Kozyrev found that in the presence of this energy flow, objects that are rigid and inelastic show weight changes, whereas flexible, elastic objects show changes in their elasticity and/or viscosity. Kozyrev also showed that the weight of a spinning top changes if it is vibrated, heated or cooled or if it has an electric current passed through it.

The Einstein-Cartan theory, which in 1913 established a theoretical basis for the existence of torsion fields, predicts that there is either right-handed or left-handed torsion in space, depending on the location. Subsequent discoveries in quantum physics related to the notion of "spin" confirmed that "electrons" have "right-handed" or "left-handed" spin, meaning that movement will be detected that is either clockwise or counterclockwise. All atoms and molecules maintain varying degrees of balance between right- and left-handed spin. Kozyrev determined that strongly right-handed molecules such as sugar can shield torsion effects, whereas strongly left-handed molecules such as turpentine strengthen them.

Subsequent Russian investigations also determined that common polyethylene film acts as an excellent shield for torsion waves, and these findings were used in many different experiments such as those discussed by Dr Alexander Frolov.

- - -

For more data on Kozyrev's experiments, see David Wilcock's complete paper, "The Breakthroughs of Dr N. A. Kozyrev", with illustrations and endnotes, on his site.

Kozyrev and the implications of his work are also mentioned in David's MP3 series "The Science of Peace".

- - -

About the Author:

David Wilcock is a professional lecturer, filmmaker and researcher of ancient civilisations, consciousness science and new paradigms of matter and energy. His upcoming film Convergence unveils the proof that all life on Earth is united in a field of consciousness.

David is also the subject and co-author of The Reincarnation of Edgar Cayce?, which explores the remarkable similarities between David and Edgar, features many of David's most inspiring psychic readings, and reveals documented NASA scientific proof of interplanetary climate change and how it has a direct impact on our DNA. Visit his website at http://www.divinecosmos.com.

Nikolai Aleksandrovich Kozyrev

2008-02-02T18:13:00.000-08:00

Biography

He was born in St. Petersburg, and by 1928 he had graduated from the Leningrad State University. In 1931he began working at the Pulkovo Observatory, located to the south of Leningrad. He was considered to be one of the most promising astrophysicists in Russia. Kozyrev was a victim of the Stalinist purges of the Pulkovo Observatory. Started by the accusations of a disgruntled graduate student, most of the observatory staff died as a result. Kozyrev was arrested in November 1936 and sentenced to 10 years for counterrevolutionary activity. In 1942, he was sentenced to be shot by firing squad, but the court later reversed its decision. He was released from prison in December 1946.

During his imprisonment, Kozyrev attempted to continue working on purely theoretical physics. He considered the problem of the energy source of stars and formulated a theory. But in his isolation, he was unaware of the discovery of atomic energy. After his release, Kozyrev refused to believe the theory that stars are powered by atomic fusion.

Kozyrev was a bold thinker and was respected by prominent scientists of his time (Arkady Kuzmin, Vasily Moroz, and Iosef Shklovsky all speak highly of him), even though his work was often of a very doubtful nature. Among these theories was the claim that the polar caps of Mars were purely atmospheric cloud formations, rather than ice-covered ground.

[edit]Publications

He is most noted for his observation of the transient lunar phenomenon in Alphonsus crater on the Moon. In 1958 he observed a patch of white within the crater, and a spectrum of the area appeared to reveal an emission cloud of carbon particles. Transient lunar phenomenon had long recorded what appeared to be temporary emissions on the lunar surface, and Kozyrev's observation appeared to provide confirmation that the Moon was volcanically active.

In 1953, Kozyrev attempted to analyze the phenomenon of Ashen light, a nocternal air glow on Venus whose existence remains controversial to this day. He also made the earliest photometric measurements of the visible and ultraviolet spectrum of Venus. His calculation of the thermal balance of Venus disputed the popular theory that the clouds of Venus consisted of dust. Kozyrev argued that energy absorbed in the upper atmosphere created high altitude storms, but at the surface of Venus it would dimly lit and still. This work had an impact on the theory of Venus and Nobel Lauriate Harold Urey devoted a paper to the analysis and implications of it.

Kozyrev believed that the white poles of Mars were caused by cloud formations in the atmosphere, not ice on the surface. This proved to be incorrect.

Due to his experiments and publications (Causal Mechanics/Theory of Time) he became one of the most controversial figures in the history of the Russian scientific community. In the 1930s, Kozyrev was considered the most promising new astrophysicist in Russia, but his arrest and long imprisonment destroyed his career during what is usually the most creative period of a scientist's life. Isolated from all news and publications, he pondered the source of internal heat in stars ad planets, but was unaware of the discoveries being made in quantum mechanics and atomic energy. After his release, he struggled to recover his place in science, but his own theories were out of step with the current physics by that time.

The dispute over Kozoyrev's causal-mechanics theory spilled into Pravda in 1959, with criticism by some of the Soviet Union's leading physicists, including Igor Tamm. In January of 1960, the Soviet Academy of Sciences and Bureau of Physico-Mathematical Sciences appointed a commission to resolve the dispute. The nine men were assigned to investigate the theory, experimental evidence, and the special issue of planetary asymmetry which Kozyrev claimed was evidence of a gyro-gravitational "latitude effect". Their findings were:

1. The theory is not based on accepted clearly formulated axiomatics, its conclusions are not developed by sufficiently strict logical or mathematical methods.

2. The quality and accuracy of conducted laboratory experiments do not allow drawing of specific conclusions about the nature of the effect.

3. Checking the asymmetric form of major planets by measuring their photographs, it was not found in Saturn. For Jupiter they arrived at the conclusion that the apparent asymmetry was the result of the asymmetric arrangement of bands on its disks but was not a geometrical asymmetry of the planet. [see: Selected Works]

[edit]Honors

The following astronomical features are named for him:

Asteroid 2536 Kozyrev.
Kozyrev crater on the Moon.

[edit]Publications

N.A.Kozyrev, On the Nightglow of Venus, Izvestiya Krymskoi Astrofizicheskoi Observatorii, Vol 12
N.A.Kozyrev, Molecular Absorption in the Violet Part of the Spectrum of Venus Krymskoi Astrofizicheskoi Observatorii, Vol 12
N.A.Kozyrev, Selected Works, published by Leningrad State Univ., 1991. 488 p.
N.A.Kozyrev, V.V.Nasonov, On some properties of time, discovered by astronomical observations, in Problemy issledovaniya vselennoi, 1980, (Russian lang.)
N.A.Kozyrev, Possibility of experimental study of properties of time, Pulkovo, September 1967 (txt available)
N.A.Kozyrev, Sources of Stellar Energy and the Theory of the Internal Constitution of Stars, In: Progress in Physics, 2005, v.3, 61-99.

^{This short section requires expansion.}

[edit]Publications with reference to Kozyrev's work

Margerison Dr. T., Causal Mechanics - The Russian Scientific Dispute, New Scientists, London, Nov 26, 1959
Akimov, A.E., Shipov, G. I., Torsion fields and their experimental manifestations, 1996 (html available)
Mishin, Alexander M., The Ether Model as Result of the New Empirical Conception, International Academy of MegaSciences, St. Petersburg, Russia (html available)
Levich, A.P., A Substantial Interpretation of N.A. Kozyrev’s Conception of Time. Singapore, New Jersey, London, Hong Kong: World Scientific, 1996, p. 1-42.
A.E.Akimov, G.U.Kovalchuk, V.G.Medvedev, V.K.Oleinik, A.F.Pugach, The preliminary results of astronomical observations of the sky with N.A.Kozyrev's method, Chief astronomical observatory of Ukraine Acad.of Sciences, Kiev, 1992
Ostrander, S. and Schroeder, L., Psychic Discoveries Behind the Iron Curtain, Prentice-Hall, Inc., Englewood Cliffs, N.J., 1970.
Hellmann, A., Aspekte der Zeit- und Äthertheorie, 2006, ([1])

^{This short section requires expansion.}

[edit]See also

Time in physics

[edit]External links

Nikolai Aleksandrovich Kozyrev: Selected Works online copy of the book (in Russian)
The breakthroughs of Russian astrophysicist Dr. Nikolai A. Kozyrev (1908-1983) by David Wilcock
Kozyrev Observations of Lunar Crater Alphonsus, 1959
Possibility of Experimental Study of Properties of Time Seminal paper in txt format

THE DIVINE COSMOS, CHAPTER 01: THE BREAKTHROUGHS OF DR. N.A. KOZYREV

2008-02-02T18:09:00.000-08:00

Dramatic scientific evidence that all of physical matter is formed by an “aether” of invisible, conscious energy has existed since at least the 1950s.

Renowned Russian astrophysicist Dr. Nikolai A. Kozyrev (1908-1983, pronounced Ko-zir-ev,) proved beyond any doubt that such an energy source had to exist, and as a result he became one of the most controversial figures in the history of the Russian scientific community.

The awesome implications of his work, and of all those who followed him, were almost entirely concealed by the former Soviet Union, but with the fall of the Iron Curtain and the advent of the Internet we are finally gaining access to “Russia’s Best-Kept Secret.”

Two generations of remarkable research by thousands of Ph.D. level specialists have emerged from Kozyrev’s seed findings, which completely change our understanding of the Universe. With our prominent mention of him in this book, we hope to permanently establish his historical importance and impact to our colleagues and readers.

Figure 1.1 – Dr. Nikolai A. Kozyrev

1.1 THE AETHER

The word “aether” means “shine” in Greek, and the fundamental reality of such an unseen, fluidlike source of universal energy has long been a hallmark of the world’s secret mystery schools. The works of Greek philosophers Pythagoras and Plato discussed it at great length, as did the Vedic scriptures of ancient India, referring to it by several names such as “prana” and “Akasha.”

In the Orient, it is often known as “chi” or “ki,” and special emphasis is placed on its interactions with the human body, such as in the science of acupuncture. Masters and adepts who inherited the secret traditions could eventually learn to manipulate this energy to create miraculous results, such as levitation, teleportation, manifestation, instant healing, telepathy and the like.

Such results have been repeatedly documented in the 20th century and studied in the laboratory, as we wrote in Convergence: The Science of Oneness.

The aether’s existence was widely accepted without question in scientific circles until the early 20th century, when the Michelson-Morley experiment of 1887 was co-opted to “prove” that no such hidden energy source existed.

However, more recent breakthroughs involving “dark matter,” “dark energy”, “virtual particles”, “vaccum flux” and “zero-point energy,” to name a few, have brought reluctant Western scientists to acknowledge that there must indeed be an unseen energy medium throughout the Universe.

As long as you use a benign term like the “quantum medium” and not the forbidden word ‘aether,’ you can talk about it in the mainstream press without much fear of ridicule.

The mainstream scientific establishment is very heavily polarized against anyone who gets too close to an ‘aether’ theory, as they “know” that such a theory must be false and will therefore fight vigorously against it. However, such suppression only increases the desire and commitment that many others have put into solving the puzzle.

One early example of proof for the existence of the aether comes from Dr. Hal Puthoff, a respected scientist from Cambridge University. Puthoff frequently mentions experiments from the early 20th century that were designed to see if there was any energy in “empty space,” conducted before quantum mechanics theory ever existed.

In order to test this idea in the laboratory, it was necessary to create an area that was completely free of air (a vacuum,) and lead-shielded from all known electromagnetic radiation fields by using what is known as a Faraday cage. This airless vacuum space was then cooled down to absolute zero or -273° C,the temperature where all matter should stop vibrating and thus produce no heat.

These experiments proved that instead of an absence of energy in the vacuum, there was a tremendous amount of it, from a completely non-electromagnetic source! Dr. Puthoff has often called this a "seething cauldron" of energy in very high magnitudes.

Since this energy could still be found at absolute zero, this force was dubbed "zero point energy" or ZPE, whereas the Russian scientists usually call it the “physical vacuum” or PV. Recently, established mainstream physicists John Wheeler and Richard Feynman have calculated that:

The amount of zero-point energy in the space volume of a single light bulb is powerful enough to bring all the world’s oceans to the boiling point!

Clearly, we are not dealing with some weak, unseen force, but rather a source of almost impossibly grand power, which would have more than enough strength to sustain the existence of all of physical matter.

In the new view of science that is emerging from aether theory, all four of the basic force fields, whether gravity, electromagnetism, weak nuclear or strong nuclear force, are all simply different forms of the aether/ZPE.

To get another idea of how much “free” energy really exists all around us, Professor M.T. Daniels found that the density of the gravitational energy near the surface of the earth is equal to 5.74 × 10^{10 (t/m}3). [Let us not forget that gravity would simply be another form of aether in this new model.]

Prof. Daniels’ finding means that drawing a sizable 100 kilowatts of this “free energy” power from the gravitational field dips into an extremely tiny 0.001% of the natural energy that is being produced in that area. (New Energy News, June 1994, p.4)

Research conducted by Nikola Tesla led to his statement in 1891 that the aether “behaves as a fluid to solid bodies, and as a solid to light and heat,” and that under “sufficiently high voltage and frequency,” it could be accessed – which was his hint that free energy and anti-gravity technologies were possible.

Let us pay special attention, again, to Tesla’s statement that the aether has a fluidlike effect when we are dealing with solid objects, as this ties in directly with the work of Dr. N.A. Kozyrev.

1.2 ANALOGIES FOR UNDERSTANDING KOZYREV’S FINDINGS

In Chapters 3 and 4, we will explode the myths of quantum physics and show that the oft-cited “particle” model of the atom is seriously flawed. Just as Einstein’s theory of relativity suggested, all of physical matter is ultimately made of pure energy, and there are no “hard particles” to be found in the quantum realm.

More and more, the scientific community is being forced to accept that atoms and molecules are akin to candle flames, where the energy that they release (such as the heat and light of the flame) must be balanced by energy that they absorb (such as the wax of the candle and the oxygen in the air.)

This “candle analogy” is a hallmark of Dr. Hal Puthoff’s model, which he uses to explain why the hypothetical electron does not radiate away all of its energy and crash into the nucleus. This seemingly “perpetual motion” within the atom is simply explained away as “the magic of quantum mechanics” in the mainstream view.

In order to truly be able to get a grasp on Kozyrev’s work and related findings, certain new analogies for physical matter are required. Rigorously, Kozyrev’s work forces us to visualize all physical objects of matter in the Universe as if they were sponges that are submerged in water.

In all of these analogies, we should consider the sponges as having remained in water for a long enough period of time that they are completely saturated. Bearing this in mind, there are two things we can do with such sponges underwater: we can decrease the volume of water that they contain or increase it, by very simple mechanical procedures.

Decrease: If a submerged, saturated sponge is squeezed, cooled or rotated, then some of the water inside of it will be released into its surroundings, decreasing its mass. Once the sponge is no longer disturbed, the pressure on the millions of tiny pores is relieved, causing it to again absorb water and expand back to its normal resting mass.
Increase: We can also pump more water pressure into the sponge in its rest state, such as by heating (vibrating) it, thus causing some of the pores to expand with more water than they can comfortably hold. In this case, once we relieve the added pressure, the sponge will naturally release its excess water and shrink back down to its normal resting mass.

1.3 BACKGROUND OF DR. N.A. KOZYREV

Since the Western world is largely uneducated about Kozyrev, some biographical and research information is in order. This will establish that he was far from a “crank” or “crackpot” scientist, but was in fact considered as one of the pre-eminent Russian thinkers of the 20th century.

Kozyrev’s first scientific paper was published at the tender age of seventeen, and other scientists were amazed by the depth and clarity of his logic. His main work was in astrophysics, where he studied the atmospheres of the Sun and other stars, the phenomenon of solar eclipses and radiation equilibrium.

By age twenty he had already graduated from the University of Leningrad with a degree in physics and mathematics, and by age twenty-eight Dr. Kozyrev was widely known as a distinguished astronomer who had taught at several colleges.

Kozyrev’s abundant life took a most unfortunate and difficult turn in 1936, when he was arrested under the repressive laws of Josef Stalin, and in 1937 he began eleven torturous years enduring all the known horrors of a concentration camp. Although he did not have access to scientific equipment during this time, he was given the most brutal of initiation experiences into hidden knowledge.

To an already enlightened mind, such bone-jarring hardship can effectively burn off all desire for gratification from the material world, removing the resistance to higher consciousness so that a state of illumination is produced where universal truth can be immediately recognized and assimilated.

From this state, he mused deeply upon the mysteries of the Universe, paying attention to all the patterns that existed in life, wherein so many different organisms show signs of asymmetry and / or spiraling growth.

He knew that in the mid-1800s, Louis Pasteur discovered that the building block of life known as “protoplasm” is inherently not symmetrical, and that colonies of microbes grow in a spiral structure.

These expanding proportions also underlie the structure of plants, insects, animals and people, as so many inheritors of the ancient tradition of the Atlantean Mysteries have written, when discussing “sacred geometry” such as the spiraling form known as Fibonacci, Golden Mean and / or “phi” spiral.

Figure 1.2 – The “Phi” Spiral in the nautilus shell (L) and with geometrically inscribed triangles ®.

From his illuminated observations in the prison camp, Kozyrev considered that all lifeforms might be drawing off of an unseen, spiraling source of energy, in addition to their normal properties of gaining energy through eating, drinking, breathing and photosynthesis. Later in this book we will see how comprehensive the data is on this point.

Kozyrev theorized that things such as the direction of a shell’s spiraling growth and which side of the human body will contain the heart are determined by the direction of this flow. Should there be an area somewhere in space-time where the energy flow was spiraling in the opposite direction, then he would expect shells to grow in the opposite direction and the heart to be in the opposite side of the body cavity.

This concept of a spiraling energy in biology may seem unrealistic, but it has long been known in the mystery schools. The next image shows us how all the ratios of “phi” emerge naturally in the structure of the human arm, and this is but one example of a process that repeats all throughout the bodies of human beings as well as all other plants, animals and insects.

Those few who acknowledge these relationships at all will typically state that they emerge simply because “phi” represents the natural, most efficient pattern in which growth can occur. Kozyrev suggested that life couldn’t form any other way, because it is actively drawing off of this spiraling energy to sustain itself, and must therefore follow its proportions every step of the way.

In this sense we can think of the skeletal system as an “antenna” for this energy.

Figure 1.3 – The “Phi” proportions in the human arm.

When Kozyrev was finally rehabilitated from the prison camp in 1948 and could return to his field of expertise, he made many advance predictions about the Moon, Venus and Mars, which were validated by Soviet space probes more than a decade later.

This then earned him the distinction of being a major pioneer in the Soviet space race. Then, in 1958, Dr. Kozyrev again aroused worldwide controversy by proclaiming that the Moon exhibited volcanic activity in the Alphonsus crater.

Should this notion have been true, which most astronomers and scientists flatly refused to believe, then it meant that the Moon possessed huge natural resources and sources of power that would make it an excellent stop-over point to propel humanity into the stars.

U.S. Nobel Prize winner Dr. Harold Urey was among the narrow group who believed that Dr. Kozyrev’s theory of volcanic activity on the moon was correct, and he urged NASA to conduct an investigation. As a direct result, NASA launched the enormous “Moon Blink” project, which later confirmed Dr. Kozyrev’s assertions by finding significant gas emissions on the moon.

However, not all of Kozyrev’s work was quite so readily assimilated into the mainstream world of NASA. In the winter of 1951-1952, just three years after escaping the brutal initiation of the prison camp, Dr. Kozyrev began his foray into the world of exotic physics, with the first of what became an exhaustive series of 33 years’ worth of very intriguing and controversial experiments.

His obvious desire in pursuing such research was to find validation for the spiritual truths that he had already experienced through the mystical process of preparation, illumination and initiation (as referred to in Rudolf Steiner’s classic Knowledge of Higher Worlds and Its Attainment) under the most extremely challenging of circumstances.

When he began publishing the results of these breakthrough studies, many Russian scientists and a scarce few in the West were prepared to listen, based on his past successes.

As we said, the spiraling energy patterns in nature unveiled themselves to the initiated eyes of Dr. Kozyrev while in the concentration camp. His “direct knowledge” informed him that this spiraling energy was in fact the true nature and manifestation of “time.” Obviously, he felt that “time” as we now know it is much more than just a simple function for counting duration.

Kozyrev urges us to try to think of a cause for time, something tangible and identifiable in the Universe that we can associate with time. After pondering this for a while, we see that time is ultimately nothing but pure spiraling movement.

We know that we are tracing a complex spiraling pattern through space thanks to the orbital patterns of the Earth and solar system. And now, the study of “temporology,” or the science of time, is under continual, active investigation by Moscow State University and the Russian Humanitarian Foundation, inspired by Dr. Kozyrev’s pioneering work. On their website, they state that:

In our understanding, the “nature” of time is the mechanism [that brings about] appearing changes and occurring newness in the World. To understand the “nature” of time is to point to… a process, a phenomenon, a “carrier” in the material world whose properties could be identified or corresponded with those of time.

This may seem strange at first glance, since a tree falling in your yard could be seen as a product of a strong wind, not the “flow of time.” However, you must then ask yourself what caused the wind to blow? Ultimately, the motion of the Earth on its axis is most responsible.

Hence, all changes are caused by some form of movement, and without movement there can be no time. Several of the scholars whose papers are published through the Russian Institute of Temporology agree that if Kozyrev had changed his terminology and use of the word “time” to more common scientific terms such as “the physical vacuum” or “the aether,” then many more people would have been able to understand his work sooner in the ensuing years.

It is not necessary at this point for the reader to fully grasp the philosophy of spiraling energy as a manifestation of time, as this will become far clearer as we proceed.

One of very few media breaks that Kozyrev ever received in the West regarding his concepts was a chapter in Sheila Ostrander and Lynn Schroeder’s groundbreaking 1970 book, Psychic Discoveries Behind the Iron Curtain, which has gained worldwide acclaim and is still being reprinted to this day with the shortened title Psychic Discoveries.

Most of the above background biographical information on Kozyrev’s early career experience has come from this source. In Chapter 13, entitled “Time – A New Frontier of the Mind,” the authors explain that even in his sixties, Kozyrev was tanned and athletic looking and gave off “an impression of great calm, an almost spiritual quality.”

They also state that:

In reputation and in work achieved, he is the most important scientist we met. He is attempting to elucidate a new world view, a new cosmogony. Under Kozyrev’s new conception, psychic happenings would fall into place. They would no longer be, as they are in the current view of science, something outside the system, something that must be denied to protect the system.

The connection of psychic phenomena to physics is well known and frequently discussed in the Russian literature that is now becoming increasingly available, and Kozyrev’s work undoubtedly paved the way for it. One of the few Western researchers to notice Dr. Kozyrev’s work was Dr. Albert Wilson of the Douglas Research Laboratories in California, who said,

I feel that something very much like what Kozyrev has hypothesized will be established in physical theory within the next decade or two. Its implications will be revolutionary. It could take a generation of work before the leap he has taken can be incorporated into the body of scientific knowledge.

Dr. Wilson’s timing was about one decade too short, as now at the dawn of the 21st century we can finally put all the pieces together. In order to keep our terms consistent, we will use the common scientific terms “torsion fields” and / or “torsion waves” to describe the spiraling flow of “time energy” that Kozyrev discovered.

[The word “torsion” essentially means “spinning” or “twisting.”]

Many Western scientists who have explored these topics, most notably Lt. Col. Tom Bearden, call them “scalar waves”, but we feel that “torsion waves” is ultimately an easier term to use, since it continually reminds us of their spiraling nature. The reader should be aware that in all cases, what we are dealing with is simply an impulse of momentum that travels through the medium of the aether / ZPE / physical vacuum, and does not possess electromagnetic qualities.

Before Kozyrev ever began conducting his experiments, a good, solid theoretical foundation was already in place to begin explaining his results. We will begin with a preliminary discussion of Einstein’s theory of relativity, followed by Dr. Eli Cartan’s additions to the model, which first established the existence of torsion fields in theory.

1.4 EINSTEIN’S GEOMETRIC MODEL OF GRAVITY

On May 29, 1919, Albert Einstein supposedly proved “…that we live in a curved four-dimensional space-time” where space and time are somehow fused together into a “fabric.” He believed that an object such as the Earth spinning in space “…would drag space and time along with it…”, and that this space-time fabric curves inward around a planetary body. Thus, he said,

Gravity is no longer a mysterious force acting at a distance, but [rather is] the result of an object trying to travel in a straight line through space [that is] curved by the presence of material bodies.

Space that is curved? “Wait…isn’t space supposed to be empty?” you ask. How can you curve something that is empty? As we can see, the significant problem in visualizing Einstein’s gravity model is with the word “curve”, as this is something that a flat, elastic sheet would do.

Indeed, most attempts to visualize Einstein’s results picture planets as if they were weights that were depressing an imaginary flat rubber sheet that is stretched out in space as the “fabric” of space-time. An object such as a comet or asteroid simply follows the geometry of the sheet as it moves towards the Earth.

The problem with this model is that any curvature of space-time would need to be moving in towards a spherical object from all directions, not just a flat plane. And furthermore, one still requires a force of gravity to pull a weight down into a flat rubber sheet. In a weightless space, the ball and the sheet would simply float around together.

In reality, the word “flowing” is far more precise than “curving,” since in Convergence III we have demonstrated that gravity is actually a form of aetheric energy that is constantly flowing into an object.

The equations for gravity do not specify which direction it must flow in, simply that it exists as a force that is responsible for objects not flying away from the Earth’s surface. Such ideas can be traced to John Keely, Dr. Walter Russell and more recently Walter Wright with his well-established “Push Gravity” theory.

Once we establish that all force fields such as gravity and electromagnetism are simply different forms of aether/ZPE in motion, then we have an active source for gravity and a straightforward reason for why it would exist. We see that every molecule in the entire body of a planet must be sustained by an ongoing in-flow of aetheric energy.

The same energy that is creating the Earth is also creating and flowing into us. We are then caught up in the gigantic current of the river of energy that streams into the Earth, much as mosquitoes get stuck to a screen window while the air blows right through the screen.

Our bodies cannot travel through solid matter, but the current of aetheric energy certainly can – and this is one of the many things that Keely, Tesla, Kozyrev and others demonstrated. A star or planet must continually draw energy from its environment in order to “stay alive.” Kozyrev had made very similar conclusions about our Sun back in the 1950s, concluding that stars acted as “machines that convert the flow of time into heat and light.”

Almost all Western scientists believe that Einstein’s general and special relativity theories eliminate the need for an aether – and indeed, Einstein advocated the rejection of an aether in 1910, which is where mainstream science still believes his thoughts ended on the issue. However, in 1920, Einstein actually stated that “the hypothesis of the existence of the ether does not contradict the special theory of relativity.” And in 1924, he wrote,

…in theoretical physics, we cannot get along without the ether, i.e., a continuum assigned physical properties, because the general theory of relativity… excludes direct long-range action; and each theory of short-range action assumes the presence of continuous fields and, consequently, the existence of the ‘ether.’ [emphasis added]

1.5 TORSION PHYSICS

In 1913, Dr. Eli Cartan was the first to clearly demonstrate that the “fabric” (flow) of space and time in Einstein’s general theory of relativity not only “curved”, but it also possessed a spinning or spiraling movement within itself known as “torsion.”

This area of physics is typically referred to as Einstein-Cartan Theory, or ECT. Cartan’s theory wasn’t taken too seriously at the time, as it came out before the days of quantum physics, when elementary “particles” such as electrons were believed to rotate or “spin” as they orbited the nucleus.

Most people are unaware that it is now generally accepted that the space surrounding the Earth and perhaps the entire Galaxy has “right-handed spin,” meaning that energy will be influenced to spin clockwise as it travels through the physical vacuum. In 1996, Russian Drs. Akimov and Shipov wrote that:

To date, world periodicals reference to torsion fields amount to the order of 10,000 articles, belonging to about a hundred authors. Over one half of those theorists work in Russia alone.

As we shall easily see, Dr. Kozyrev’s work was the main influence for the more than 5,000 Russian papers on this subject as of 1996. In classical physics models, torsion fields were never considered to be a universal force on the level of gravity or electromagnetic energy, largely because they only existed theoretically.

Cartan’s original 1913 theory speculated that torsion fields would be some 30 orders of magnitude weaker than gravitation, and gravity is already known to be 40 orders of magnitude weaker than electromagnetic energy! With such a miniscule level of influence, so said the theories, the naturally-spinning “torsion fields” were basically an irrelevant footnote that would not make any noticeable contributions to the phenomena that we can observe in the universe.

For those scientists who had maintained an open mind, the works of Trautman, Kopczyynski, F. Hehl, T. Kibble, D. Sciama and others in the early 1970’s triggered a wave of interest in torsion fields. Hard scientific facts exploded Cartan’s 60-year-old theory-based myth that such fields were weak, tiny and unable to move through space.

The myth of the Einstein-Cartan theory was that the spiraling torsion fields could not move, (i.e. they would remain static,) and could only exist within a space far smaller than the atom.

Sciama et al. demonstrated that these basic torsion fields expected in ECT did exist, and they were referred to as “static torsion fields.” The difference was that “dynamic torsion fields” were demonstrated as well, with properties far more remarkable than Einstein and Cartan had assumed.

According to Sciama et al., static torsion fields are created from spinning sources that do not radiate any energy. However, once you have a spinning source that releases energy in any form, such as the Sun or the center of the Galaxy, and / or a spinning source that has more than one form of movement occurring at the same time, such as a planet that is rotating on its axis and revolving around the Sun at the same time, then dynamic torsion is automatically produced.

This phenomenon allows torsion waves to propagate through spaceinstead of simply staying in a single “static” spot. Thus, torsion fields, like gravity or electromagnetism, are capable of moving from one place to another in the Universe.

Furthermore, as we shall discover in later chapters, Kozyrev proved decades ago that these fields travel at “superluminal” speeds, meaning that they far exceed the speed of light.

If you can have an impulse that moves directly through the “fabric of space-time”, travels at super-luminal velocities and is separate from gravity or electromagnetism, you have a significant breakthrough in physics – one that demands that a “physical vacuum”, “zero-point energy” or “aether” must really exist.

1.6 MASTER LIST OF PHENOMENA THAT CREATE KOZYREV’S EFFECTS

Kozyrev’s experiments began in the 1950s and were conducted since the 1970s with the ongoing assistance of Dr. V.V. Nasonov, who helped to standardize the laboratory methods and the statistical analysis of the results.

It is important to remember that these experiments were conducted under the strictest conditions, repeated in hundreds or in many cases thousands of trials, and were written about in extensive mathematical detail. They have been rigorously peer-reviewed, and Lavrentyev and others have replicated the results independently.

(We have omitted the mathematical / analytical analyses of Kozyrev’s results in this book to enhance its readability.) Certain specially-made detectors using rotation and vibration were designed that would react in the presence of torsion fields, which Kozyrev called the “flow of time.”

If we go back to our earlier analogy, we said that matter behaved somewhat like a sponge in water. If we do something to disturb the structure of the sponge, such as to squeeze it, spin it or vibrate it, then it will release some of its water back into its environment. Over the years, all of the following processes were discovered to create a “time flow” of torsion waves in the laboratory, due to their disruption of matter in some form:

the deforming of a physical object
the encounter of an air jet with an obstacle
the operation of an hourglass filled with sand
the absorption of light
friction
burning
the actions of an observer, such as a movement of the head
the heating or cooling of an object
phase transitions in substances (frozen to liquid, liquid to vapor, etc.)
dissolving and mixing substances
the fading death of plants
non-light radiation from astronomical objects
sudden changes in human consciousness

Other than the perplexing final item related to consciousness, we can readily see how each process is disturbing matter in some way, thus causing it to absorb or release minute amounts of its aetheric “water,” which fits perfectly with our sponge analogy.

Even more importantly, the fact that strong emotional energy could also cause a measurable at-a-distance reaction has been repeatedly documented, not just by Dr. Kozyrev but many others, and this is where our concepts of psychic phenomena and consciousness come into the picture.

Such concepts became even bigger news after the Sept. 11, 2001 terrorist attack on the United States, when Dean Radin and his team at the Institute of Noetic Sciences were able to measure a tremendous change in the behavior of computerized random-number generators surrounding the time immediately before and after the attack:

Figure 1.4 – Data from Radin / INS measuring a change in mass consciousness

on Sept. 11, 2001

The graph shows that somehow, a change in the mass consciousness of humanity affected the behavior of electromagnetic energy in computer circuits around the world, especially those computers nearest to North America. Later we shall see that this is just the beginning of a whole new world of “consciousness science.” We will suggest that torsion waves and consciousness are essentially identical manifestations of intelligent energy.

Returning to the more ‘comfortable’ arena of physical matter, Kozyrev’s work showed that torsion fields can be absorbed, shielded or sometimes reflected. For example, sugar can absorb, polyethylene film and aluminum can shield, and other forms of aluminum or mirrors can reflect.

Kozyrev found that in the presence of this energy flow, objects that are rigid and inelastic will show weight changes, whereas flexible, elastic objects will show changes in their elasticity and / or viscosity.

Kozyrev also showed that the weight of a spinning top will change if it is vibrated, heated or cooled or if it has an electric current passed through it. As we can see, all of the above behaviors fit in quite nicely with our analogy of the “sponge” of matter absorbing or releasing small amounts of energetic “water”.

1.7 BUILDING A MECHANICAL DETECTOR FOR THE “TIME FLOW”

Obviously, the biggest unanswered challenge at this point would be how such energy could be mechanically detected. After all, it has completely eluded the mainstream for well over a century. Here, it is important to remember that though the forces of torsion waves on matter are relatively small, they do exert a steady push.

Research of Shipov, Terletskiy and other Russian theorists have directly associated the energy of torsion fields with the energy of gravity, thus leading to the term “gravispin energy” and the science of “gravispinorics.”

In these new theories, gravity and spin are coupled in the same basic manner as electrostatics and magnetism join to form the electromagnetic wave. Though torsion waves can travel in any direction, they are most typically absorbed into the downward flow of the gravitational field.

So, the strongest effects of the pressure of torsion waves would be a slight spiraling movement that is joined with gravity. Since it is a very subtle pressure, we do not typically notice any such movement in ourselves or in falling objects.

Many of Kozyrev’s mechanical detectors of torsion waves involved objects in motion, such as a rotating gyroscope or an asymmetrical swinging pendulum. A simple analogy helps us to begin to understand how such objects in motion were able to capture this gentle pressure.

If you have a ship at sea and do not align your sails with the direction of the wind’s flow, then your ship will not move. Your sails must align with the direction of the wind, and if the wind’s current changes, then you must also move the sail to capture the new direction.

Detecting torsion waves is a more difficult process than sailing, as the torsion waves are continually changing their direction in the form of a three-dimensional spiral. Somehow, you must create vibrations in the detecting object that will allow it to continually harness a three-dimensional, moving spiral of energy force.

Kozyrev was able to capture the subtle pressure of the torsion waves by combining two different forms of vibration or movement at a time. We will discuss exactly how this was done in the following paragraphs. Under these special laboratory conditions, gyroscopes or pendulums could be used to interact with the “time flow” energy, as Kozyrev called it.

In these cases, such detectors will exhibit weight variations or sudden angular movements in response to the energy.

One of the most basic detectors of “time flow” energy that Kozyrev used was the “torsion balance,” meaning that it was a balance beam that could spin freely as it was suspended from a thread.

As described in Kozyrev’s first paper for the year 1971, the torsion balance did not have an equal distribution of weight on either side, as one end of the beam weighed ten grams and the other end was only one gram.

Kozyrev suspended this beam with a string (filament) of capron that was 30 micrometers in diameter and 5-10 centimeters long. The string was attached much closer to the heavier end of the beam than the lighter end, so that the beam would remain in a perfect horizontal position under the effects of gravity. This positioning also created greater stress within the beam itself, making it move very easily.

The lighter end of the beam was fashioned into a pointer, so that Kozyrev could measure on a protractor how many degrees the beam had moved at any time.

In order to avoid being influenced by the atmosphere, the entire system was sealed under a glass cap so that all of the air inside could be vacuumed out. Furthermore, Kozyrev surrounded the cap with a metal net (similar to a Faraday cage) so that all known electromagnetic influences would be shielded.

Most importantly, the top of the filament, where the beam balance was hanging from, was mechanically vibrated by an electromagnetic device.

The experiments were not considered valid unless the beam would remain perfectly still even in the presence of the extra vibrations at the top of the string. However, these extra vibrations jiggling the top of the string created a greater sensitivity to outside vibration that would reverberate throughout the entire object.

We already have an uneven set of weights that are carefully suspended on a thin string so that they remain horizontal, giving us a system that is under a lot of stress and will move very easily with the slightest touch. This is similar to the power of the lever to allow a person to lift up their entire car with the simple cranking up of the jack.

Then, when you also add the stress of the vibrations moving up and down the string and into the balance itself, you have all the necessary ingredients to make the detector so extremely sensitive that the whisper-soft pressure of torsion waves can show a measurable effect. This is one of several clever ways to capture and detect these forces. (As another example, a gyroscope may be set in motion and then hung from a string that is vibrated.)

In some senses this extra sensitivity works in the same way as an air hockey table, where you have a flat, rectangular surface with many tiny holes that shoot air straight upwards.

The game is played with a light, flat puck that is knocked back and forth by two players. If the air is running on the table, (similar to the asymmetry of the balance and the extra vibrations on the filament in Kozyrev’s experiments,) then in this case, the gravity on the puck is counteracted by an upwards force, creating a more delicate balance between the two.

The puck may remain perfectly still when left alone, but if you introduce new energy into the system by hitting the puck while the air is on, it moves extremely fast and with very little effort. When the air is off, the puck moves much more slowly and requires a greater force to set it in motion.

The same is true with Kozyrev’s detectors. If the extra vibrational energy isn’t included, then you’d be lucky to ever see a reaction, because the “push” of the torsion waves are not normally strong enough to move a stationary object. Many scientists who have tried to replicate Kozyrev’s experiments have often not succeeded, because they do not see the extra vibrations as being important.

Naturally, you will not detect torsion waves with a pendulum if it is not asymmetrical and / or if you do not introduce vibrations into it at the top of the string. Another way to visualize this effect is our analogy from the prologue, regarding the difference between a drop of water that is placed onto cold metal as opposed to that which is placed on a hot skillet.

The vibrations of the metal in the skillet will cause the water to zip around the pan, becoming very sensitive to the slightest change in pressure from any direction.

For our spiritually-inclined readers, it is interesting to note that the teachings of the Initiates have referred to the need to “raise your vibrations” for thousands of years if you want to be capable of perceiving the unseen energy of the universe.

As we have proven in some of our workshops, within a relatively short span of time, a human being can be trained to respond to the gentle pressure of torsion waves in the human “aura” by touch. With greater training such as is described in the works of Rudolph Steiner or Carlos Castenada, the human energy field can eventually be visually seen.

In later works we will discuss the voluminous evidence to prove that the human energy field does indeed exist, as the torsion-wave component to our physical bodies.

1.8 SIMPLE MOVEMENT CREATES TORSION WAVES

Some of Kozyrev’s experiments seemed almost deceptively simple, considering the effects that he was able to achieve. For example, the simple raising and lowering of a 10-kg weight would exert torsional pressure on a pendulum at a distance of 2-3 meters, an effect which would even travel through walls.

The pendulum that was used as a detector was shielded in glass under a vacuum, so this effect could not have been caused by the air. Again, the key component to the experiment was that the top of the string needed to be vibrated in order to introduce the extra tension and movement that would allow the pressure of the torsion waves to be picked up by the pendulum.

This is another experiment that shows how the sheer mass of the 10-kilogram weight behaves like a sponge in water, creating “ripples” in the surrounding “water” when it is moved up and down. Again, this is a basic property of matter.

1.9 WEIGHT INCREASE AND DECREASE CAUSED BY SIMPLE MOVEMENT

In another similar experiment, Kozyrev had a typical beam balance that is used for weight measurements, where the right side had a fixed weight and the left side had a hook for suspending various objects.

In this case, the objects Kozyrev hung from the left side were also just simple weights, only they were attached to rubber strips that allowed them to be easily mounted on the balance. Normally, with the weights on either side in a stable position, the beam would stay balanced at a certain weight that could be measured on its scale.

Kozyrev would then stabilize the arm of the beam balance either with his hand or a clamp so it wouldn’t move, and remove the object on the left from its hook. Then, he would shake the object up and down on the piece of rubber for about one minute. That’s all!

After doing this, when he would place the object back on the balance arm with perfect stillness, he would again measure its weight, which would be slightly higher than before. Then, the scales would show the measured weight of the object gradually decreasing, as it released the extra energy that it had taken in.

He noted that it was important that his hand didn’t heat the balance arm while holding it, so he would typically use a metal clamp to hold the bar instead.

Interestingly, on certain days this test would work quite easily, whereas on other days it would work only with great difficulty or not at all. The same is true for the above experiment where a 10-kg weight was raised and lowered repeatedly. This is known as a “time-variable” phenomenon and will be discussed below.

1.10 KOZYREV’S RESULTS HAVE BEEN REPLICATED, NEVER DISPROVEN

Many readers have expected that Kozyrev’s effects are simply due to errors in his recording. Here, it is important to remember that no concrete disproof of N.A.Kozyrev and V.V. Nasonov’s experimental results exists (Levich, 1996).

In addition, independent groups of researchers have now reproduced and confirmed some of Kozyrev’s experiments. These include A.I. Veinik from the 1960s-1980s, Lavrentyev, Yeganova et al. in 1990, Lavrentyev, Gusev et al. in 1990, and Lavrentyev et al. in 1991 and 1992. American researcher Don Savage has also replicated much of Kozyrev’s work and published it in Speculations in Science and Tech.

Furthermore, without any knowledge of Kozyrev’s work, in 1989 G. Hayasaka and S. Tekeyuchi discovered similar weight-loss effects with rotating 150-gram gyroscopes, and more recently obtained success by dropping the gyroscopes between two precision laser beam detectors.

(Remember that a gyroscope that is being weighed in a rotating and non-rotating state will not show any measurable weight changes unless an additional process is introduced such as vibration, movement, (in this case dropping,) heat conduction or electric current transition.)

The results of Hayasaka et al.’s study, conducted on behalf of the Mitsubishi corporation, actually did make it into the mainstream media, surprisingly enough. Furthermore, they did indeed attribute their results to the effects of torsion fields.

Many other researchers such as Dr. S.M. Polyakov, Dr. Bruce DePalma and Sandy Kidd have independently discovered gravitational changes with gyroscopes, but it appears that most of them have not fully understood the fluidlike nature of the aether, which always travels in the spiraling movement of torsion waves.

1.11 ANTI-GRAVITY EFFECTS CAUSED BY THE DIRECTION OF ROTATION

Many of Kozyrev’s experiments showed that the direction of the detector’s movement was very important in creating measurable weight changes. He determined that a gyroscope that was vibrating, heating or conducting electricity would substantially decrease its weight when it was rotated in a counter-clockwise motion, whereas it would remain unchanged if it were rotated in a clockwise motion.

Kozyrev concluded that this was caused by the “Coriolis effect,” where an object will indeed show a rotational movement as it is dropped towards the surface of the Earth. Ultimately, this is due to the subtle spiraling pressure of torsion that is imparted to the flow of aether (gravity) as it rushes into the earth, upholding the existence of all its atoms and molecules.

In 1680 Newton and Hook confirmed that the Coriolis effect was real by dropping objects down long mine shafts, and the experiment was repeated many times thereafter.

The Coriolis effect causes counter-clockwise movement in the Northern Hemisphere and clockwise movement in the Southern Hemisphere, and is considered the major force behind the movement of weather systems. It also has to be factored in when firing long-range cannons at a specific target, which was a very confusing military problem before the Coriolis effect was discovered. It is another little-known fact of science that most people are unaware of.

We remember that Kozyrev would first vibrate, heat or electrify his gyroscope in order to see his anomalous effects. Under these conditions, he would then move the gyroscope in either a clockwise or counter-clockwise motion. If the vibrating gyroscope is moved in a counter-clockwise direction in the Northern Hemisphere, then it is moving in unison with the counter-clockwise current of the Coriolis effect.

This causes the object to absorb some of the energy that would normally be pushing it down, and a small but definite decrease in its weight is then measured.

The work of G. Hayasaka and S. Tekeyuchi, which we mentioned above, independently confirmed the same anomalous result. When their gyroscope was rotated counter-clockwise it would fall slower than expected, whereas if it were rotating clockwise they could detect no changes, thus verifying Kozyrev’s findings. Naturally, Japan is also in the Northern Hemisphere.

Kozyrev also found that additional torsion would be introduced in these experiments if his gyroscope was not kept 100% horizontal, which suggested to him that gravity, which moves straight down, is somehow joined with torsion waves, as later theorists confirmed. Without the existence of an aether and the phenomenon of dynamic torsion, none of these results would even be remotely possible.

1.12 DEPALMA’S SPINNING BALL EXPERIMENT

Figure 1.5 – Data of Dr. Bruce DePalma’s Spinning Ball Experiment
from Hoagland’s 1992 UN Briefing

A perfect example of harnessing torsion waves by rotation was discovered completely independently by Dr. Bruce DePalma, frequently cited by R.C. Hoagland et al. on the Enterprise Mission website. Within a complete vacuum, DePalma took two steel balls and catapulted them into the air at equal angles, with an equal amount of force.

The only difference was that one ball was rotating 27,000 times per minute and the other was stationary. The rotating ball traveled higher into the air and then descended faster than its counterpart, which violated all known laws of physics.

The only explanation for this effect is that both balls are drawing energy into themselves from an unseen source, and the rotating ball is thus “soaking up” more of this energy than its counterpart – energy that would normally exist as gravity, moving down into the earth.

With the addition of torsion-field research we can see that the spinning ball was able to harness naturally spiraling torsion waves in its environment, which gave it an additional supply of energy.

1.13 TIME-VARIABLE EFFECTS

Kozyrev found that a time-variable effect is produced within his experiments. He discovered that these experiments worked best in late autumn and the first half of winter, but were next to impossible to perform in the summer. Kozyrev believed that the heating of the atmosphere in the summer was creating a disturbance that would interrupt the flow of the torsion waves.

The extra heat would cause the air molecules to jiggle more vigorously, and this in turn would disrupt the subtle spiraling pressures as the torsion-waves traveled. As he himself explained it, “the heating by solar rays creates an atmospheric loader, interfering with the [experimental] effects.”

Earlier in his career he thought that this time-variable effect was caused by the naturally-occurring growth of vegetation in warmer months, since he had already noticed that the simple presence of growing plants could interfere with his experimental results, as they would draw energy into themselves that would normally flow to the detectors.

Clearly, the combination of the plants absorbing the energy for their sustenance in the summer and the increased chaos of vibrations in the warmer atmosphere could both be responsible for the difficulty in making such measurements during the warmer seasons.

This seasonal experimental effect could also prevent American scientists who might be living in an area like Southern California from ever being able to replicate his results, as they never experience the late autumn and winter conditions that were most favorable for the experiments to be done.

1.14 LOCATION, LOCATION, LOCATION

Another overall implication of Kozyrev’s work is that the geographical location of the experiment also makes a significant difference. His best results were obtained when he carried out measurements near the North Pole, the most adventurous being conducted on chunks of drifting ice with a maximum latitude of 84° 15’, the North Pole being at 90°.

This is a very important point, as it shows us that the greatest amount of torsion-wave energy is flowing into the Earth at the polar regions, growing weaker as we move towards the equator.

Certainly, most readers will wonder why there would be any effects associated with the poles of the earth. The answer is found in a study of magnetism.

In 1991-92, A.I. Veinik determined that the typical “permanent” iron ferrite magnets do not only have a collective magnetic field, but a collective torsion field as well, with a right-handed spin at the north pole and a left-handed spin at the south.

Dr. G. I. Shipov demonstrated that all electromagnetic fields generate torsion waves. So, since we all know that the Earth’s magnetic field is most concentrated at the poles, then we can see that the greatest strength of torsion-waves would be in the polar regions as well.

In his books and website, Richard Pasichnyk has demonstrated that earthquake impulses travel faster from north to south than from east to west. Thus, the added pressure of the torsion waves, instreaming and outflowing in the polar regions, affects far more than just the typical north-south polarity of the magnetic field that can be measured with a compass.

Kozyrev also determined that the torsional energy flows differently in the southern hemisphere of the earth as opposed to the northern, and this again is due to the Coriolis effect. He also discovered that the speed of gravitational acceleration changes slightly between the northern and southern hemisphere by a subtle factor of 3.10^-5.

This appears to be caused by the little-known fact that the spherical shape of the Earth is actually flatter in the northern hemisphere as opposed to the southern!

This has also been observed and measured in other planets such as Jupiter and Saturn. Kozyrev believed that since the surface of the southern hemisphere was slightly farther away from the Earth’s center of gravity than the northern hemisphere, this was responsible for the subtle change in the speed of gravity’s acceleration.

1.15 LATENT FORCES EXISTING AFTER ENERGY STOPS BEING GENERATED

The word “latent” means “left over,” and Kozyrev observed certain effects that continued for a time after he had stopped creating any torsion waves and / or disturbance to the measured objects. We remember that Kozyrev demonstrated how the simple shaking of a weight on a rubber strip would cause its weight to increase, and that it would slowly drop back down to its normal rest mass once it was placed back on the balance beam.

The time that the object takes to return to its normal weight is how we measure the “latent force” that it is capable of holding.

Certain objects will gain and lose weight faster than others in Kozyrev’s experiments. Kozyrev concluded that the rate at which an object gains or loses weight is actually based on its density, or thickness, not on its overall weight. He showed that the loss of weight occurs at an exponential rate, and the denser the material is, the quicker the residual forces will disappear. Here are some examples:

Lead, at a density of 11, will lose its latent forces in 14 seconds,
Aluminum, at a density of 2.7, loses its latent forces in 28 seconds, and
Wood, at a density of 0.5, loses its latent forces in 70 seconds.

If this seems hard to understand, we could think of the fact that a denser, thicker sponge such as the foam used in a mattress or seat cushion has much more of a “spring” to it than a lighter, thinner one, such as a tired old kitchen sponge.

The more of a “spring” the material has, the quicker it can absorb and release energy. Kozyrev also tested these effects on copper, brass, quartz, glass, air, water, coal, graphite, table salt and others, and indicated that “the largest effects, with maximum preservation times, were observed on porous materials like brick or volcano tuff” (Nasonov 1985a, p.15).

This should interest us, since the sponge in our analogy is also a porous material, meaning that it is filled with many pores or holes inside of itself.

1.15.1 THE ASPDEN EFFECT

Another example of latent forces existing in a system is found in the Aspden effect, discovered by Dr. Harold Aspden of Cambridge University. This experiment involved a gyroscope whose central wheel was fashioned from a powerful magnet.

The normal amount of energy that would be required to rotate the gyroscope to a certain maximum speed was 1000 joules. Like a glass of water being stirred up with a spoon, the rotation of the gyroscope would cause the aetheric energy inside its central wheel to begin spiraling, and this churning movement would continue inside the object even once Dr. Aspden brought the gyroscope to a stop.

Surprisingly, for up to 60 seconds after Aspden’s gyroscope stopped rotating, it would take ten times less energy to return it to the same velocity as it had attained the first time – only 100 joules.

This is another reproducible effect that has simply been ignored by the mainstream, because it “violates the laws of physics.” However, with Kozyrev’s work as a background, we can hear the chuckles of Russian scientists as they read of Dr. Aspden’s troubles in getting anyone in the West to acknowledge this effect.

Now if you’ve been paying attention, you might notice that Kozyrev showed that lead (Pb) maintained its latent forces for 14 seconds and aluminum for 28, and yet Dr. Aspden’s gyroscopes would retain their forces for a full 60 seconds.

This is due to the fact that extra aetheric / torsional energy is harnessed by the powerful permanent magnet making up the center of the gyroscope – and in The Science of Oneness we demonstrated how this basic property of rotating magnets has been used to create many different “free energy” devices.

1.16 MASTER LIST OF NON-MECHANICAL DETECTORS

Although we have discussed gyroscopes, pendulums and torsion beam balances so far, Kozyrev also discovered non-mechanical detectors that could pick up the energy of the “time flow.”

What we mean by “non-mechanical” is that torsion waves could be detected without the moving parts normally required, which involved two different forms of mechanical vibration or motion, such as in the gyroscope, torsion balance and pendulum.

Some of these non-mechanical detectors can demonstrate quite substantial changes in the presence of torsion fields, and in the case of tungsten and quartz, the effects of torsion fields on the material can be irreversible. All of the following will show changes in the presence of torsion-wave energy:

the conductiveness of electronic resistors, especially those made from tungsten metal
the mercury level in thermometers
the vibrational frequencies of quartz crystal oscillators
the electric potentials of thermocouples
the viscosity of water
the amount of electronic work that can be performed in a photoelectric cell
the reaction rates of chemical compounds (such as the Belousov-Zhabotinsky effect)
the growth parameters of bacteria and plants

A highly-detailed summary of Kozyrev’s work, including the exact graphs, detailed statistics, analyses and descriptions of all the above detectors, can be found in “A Substantial Interpretation of N.A. Kozyrev’s Conception of Time,” by A.P. Levich, 1996.

1.17 CHERNETSKY’S REPLICATION

Some of these non-mechanical torsion-wave detectors were reproduced by the team of A.V. Chernetsky, Y.A. Galkin and S.N. Kolokoltzev, who also created a device that generated and stored this aetheric energy much like a capacitor, which is an electronic component that stores an electric charge. They referred to their invention as a “self-generating discharge device.”

Like Kozyrev, Chernetsky et al. found that the level of resistance in an electronic circuit would change if a part of it was placed between the two capacitor plates of the device while it was in operation. Also, the vibrational frequency of a quartz oscillator could become 1000 or more times faster than it was before it was placed in between the plates.

This should raise an eyebrow, as the reliability of quartz crystals to maintain a steady pulsating rhythm while having electricity pass through them is used to keep accurate time in the vast majority of digital watches and clocks in existence.

1.18 LATENT FORCES IN THE VACUUM AND IN MATTER

Chernetsky et al. also discovered that their “self-generating discharge device” could create a “static” or non-moving torsion field within the very structure of space-time itself. A flowing “current” can be created in the fluidlike aether even if no matter existed in the area.

Chernetsky et al. could still measure the same torsion-field effects in the area that had been between the two plates of the machine, after the machine was turned off and far removed from the area! The latent effects would still be measurable with tungsten metal or quartz oscillators.

Another similar effect was discovered by Donald Roth, which he called “Magnetic Memory,” and documented by the Institute for New Energy. Roth discovered that he could bring a magnet close enough to a beam balance that it would attract the balance to itself, and after about five days the magnet could be moved much farther away from the balance and still attract it the same way.

The Russians refer to this concept as “vacuum structuring,” and it again shows us that there is “something there” in supposedly empty space – something that the inheritors of the Atlantean Mysteries knew as the “aether.”

Kozyrev also discovered that a physical substance can become “structured” in the same way. As he wrote on page 217 of his 1977 paper,

… A body placed for a certain time near a process [that generates torsion waves] and then brought to a torsion balance [would] produce the same effect on [the torsion balance] as [the original torsion-generating] process [produced by] itself. [The] memorizing [of] the action of processes is a feature of [all] different substances, except aluminum.

In 1984, Dankachov showed that the “memory” or “structuring” effect could occur with water as well, and this is one experiment that does find its way into Western alternative scientific thinking from time to time. The “memory of water” experiments begin by utilizing one of the basic torsion-wave creating processes to cause the measured viscosity or thickness of water to decrease.

Then, the treated water is placed next to another container of water, and the new water’s viscosity will then decrease just like the original treated water. Other experiments, such as those of Jacques Beneviste, show that this “memory of water” effect is able to carry over into chemical effects as well, where torsion-wave generators are used to excite water with a certain chemical compound in it.

Then, that compound can be energetically transferred to a sealed container of pure water, and the sealed water will acquire the same chemical characteristics as the original.

1.19 SOLAR ECLIPSE ENERGY SHIELDING EFFECT

As we already suggested in the prologue, the Sun is our obvious choice for being the primary source of torsion waves in our heliosphere, due to it having 99.86% of the total mass of the Solar System.

In 1970, Saxel and Allen showed that during a solar eclipse, the presence of the moon shields the Sun’s radiant torsion fields, and this causes an increase in the period of oscillation for a torsion balance.

Meteorologists V.S. Kazachok, O.V. Khavroshkin and V.V. Tsyplakov were able to repeat this experiment during the 1976 solar eclipse and produce the same effect, which they then published in 1977. Others have obtained the same results through observing the simple deviations of a pendulum at the time of a solar eclipse.

1.20 MOLECULAR ALIGNMENTS AIDING OR SHIELDING TORSION EFFECTS

As we already mentioned, the Einstein-Cartan theory first established a theoretical basis for the existence of torsion fields in 1913. The theory predicts that there will either be right-handed or left-handed torsion in space, depending on the location.

Subsequent discoveries in quantum physics related to the notion of “spin” confirmed that “electrons” will either have “right-handed” or “left-handed” spin, meaning that movement is detected that will either be clockwise or counterclockwise. All atoms and molecules maintain varying degrees of balance between right and left-handed spin.

Kozyrev determined that strongly right-handed molecules such as sugar can shield torsion effects, whereas strongly left-handed molecules such as turpentine will strengthen them. Subsequent Russian investigations also determined that common polyethylene film acted as an excellent shield for torsion waves, and were used in many different experiments such as those discussed by Dr. Alexander Frolov.

1.21 “QUANTIZED” CHANGES IN WEIGHT

We discussed Kozyrev’s experiments where an object would be disturbed in various ways, and its changes in weight would then slowly return to balance over time. There is one important factor that emerged in these experiments that does not easily fit in with our convenient analogy of the sponge in water, and that is known as “effect quantization.”

(We shall explain what causes it later.)

When something is quantized, that means that it does not move or count smoothly, but only stepwise, in certain specific intervals. Simply put, the weight of an object would not increase or decrease steadily in the “latent force” experiments, but rather in sudden bursts. This is certainly a highly anomalous property for matter to have. As Kozyrev said,

In the vibration experiments on a balance the weight reduction… occurs stepwise, beginning with a certain vibration power. As vibration frequency is further increased, the weight reduction… at first remains the same and then again grows stepwise by the same value… So far a realistic explanation of this phenomenon has not been found…
Afterwards it turned out that effect quantization takes place in almost all the experiments. (Kozyrev 1971, p. 126)

As a case in point, Kozyrev studied these effects on a 620-gram weight, which he would subject to vibrations, measured in hertz or cycles per second. We remember that cooling an object contracts it, whereas heating an object expands it.

Both heating and cooling are functions of vibration, so depending on how we vibrate an object, we can either cause its weight to increase or decrease. In this experiment, the mass of the 620-gram weight would be slightly increased by subjecting it to high-speed vibrations.

In order to give the experiments nice, clean numbers, Kozyrev and Nasonov later applied a straightforward mathematical function to “renormalize” the results from the 620-gram weight to the higher and simpler value of 1 kilogram. The numbers given in the next paragraph are renormalized to the 1-kilogram level.

Figure 1.6 – Quantized increases in weight with growing vibrational frequency,
measured by beam balance.

So as we can see from this chart, as the vibrations of the object rose to the threshold area of 16-23 hertz, (or cycles per second,) the object would show a stable weight increase of 31 milligrams. At this level, Kozyrev could increase the vibrations between 16 and 23 cycles per second and detect no further weight gain.

Then suddenly, as he increased the vibrations on the weight to 24 hertz, its overall weight increase would spontaneously double to 62 milligrams. As he increased the vibrations from 24 to 27 hertz, no change in weight was registered.

Yet, when the vibrations increased to 28 hertz, the net weight increase would again suddenly jump up by another 31 hertz to 93 milligrams. Each time that a new threshold would be reached, the initial gain of 31 milligrams would be added to the overall amount. As Kozyrev discovered,

We succeeded in obtaining fivefold and even tenfold effects. (!)

Let us not forget that this “effect quantization” occurred in almost all of Kozyrev’s experiments, whether the overall weight of the object in question was either increasing or decreasing.

In order for something like this to be taking place, the basic 31-milligram interval that was measured with the 1-kilogram object must be a function of its combined volume, density, weight and topology (shape), similar to the tone that you hear when striking a bell of a given size, shape and density. As Kozyrev rose the frequency of vibrations in the object, new intervals of weight increase were produced, but always in units of 31 milligrams.

This “effect quantization” is actually a very important key to understanding the multidimensional nature of matter, illustrating that atoms and molecules maintain an onion-like structure of nested spherical waves. Our discussions in the next chapter will begin to show the context of this experiment and how it relates to new discoveries in quantum physics.

1.22 DIFFICULTY IN COMBINING KOZYREV’S VIEWS WITH MAINSTREAM SCIENCE

Kozyrev’s views are not quickly or easily assimilated by the mainstream scientific community, especially in the West, because the magnitudes of the effects he measured are quite small.

For example, the additional forces that were introduced in his mechanical experiments changed the weight of the objects being studied by a mere factor of 10^{-4 to 10}-5, such as the gyroscope that would only become 100 milligrams lighter when rotating and vibrating at the same time.

In order to appreciate how small of a change this is, remember that a certain active ingredient that was added to a vitamin pill might have 100 milligrams of weight on the label.

As Kozyrev himself puts it,

“The experimental results show that the organizing property of time exerts a very small influence on systems [of matter such as stars,] compared with the usual, destructive course of their development. Therefore it is not surprising that this… entity has been missed in our system of scientific knowledge. However, being small, it is distributed everywhere in nature, and only the possibility of its being stored is needed” (Kozyrev 1982, p.71).

PREVIOUS | INDEX | NEXT

REFERENCES:

Akimov, A.E. and Shipov, G.I. Torsion Fields and their Experimental Manifestations. Proceedings of International Conference: New Ideas in Natural Science, 1996.
Anonymous. (Amount of vaccuum space in light bulb) {Link no longer in operation 6/02}:
Fox, Hal. Now Come Torsion Fields. NEN, Vol. 5, No. 11, Mar. 1998, p.1. URL:
Gamow, George. Gravity. Anchor Books, NY, 1962; p. 138.Keely, John. Sympathetic Vibratory Physics.
Kozyrev, N.A. On the Potential for Experimental Investigation of the Properties of Time. 1971.
Levich, A.P. A Substantial Interpretation of N.A. Kozyrev’s Conception of Time. Singapore, New Jersey, London, Hong Kong: World Scientific, 1996, p. 1-42.
Lyne, William. Occult Ether Physics. Creatopia Productions, NM, 1997. ISBN: 0-9637467-2-3
Nachalov, Yu.V. Theoretical Basics of Experimental Phenomena.
Nachalov, Yu.V. and Parkhomov, E.A. Experimental Detection of the Torsion Field.
Nachalov, Yu.V. and Sokolov, A.N. Experimental Investigation of New Long-Range Actions. 1993.
Ostrander, S. and Schroeder, L. Psychic Discoveries Behind the Iron Curtain. Prentice-Hall, Inc., Englewood Cliffs, N.J., 1970.
Pasichnyk, Richard. The Vital Vastness: Volume One. Writer’s Showcase, 2002.
Russell, Walter. The Divine Iliad. University of Science and Philosophy
Taubes, Gary. Relativists in Orbit. Discover Magazine, March 1997.
Tesla, Nikola. Lecture Before the Institute of Immigrant Welfare. May 12, 1938.
Wilcock, David. Science of OnenessI. April, 2001. URL:
Wright, Walter. Push Gravity

Orgone-Scalar Magnetic pulser

2008-02-02T18:01:00.000-08:00

516-992-2734

ORGONE GENERATOR SCALAR MAGNETIC PULSER PERSONAL USE - eBay (item 200196081407 end time Feb-04-08 16:10:04 PST)

This device is unique. It is an orgone generator with the bottom layer low density material, the middle layer is medium density, and the top layer is expanded high density. inside is a large mobius coil, 4 quartz crystals, a blue kyanite blade, a selenite blade, 2 garnets, and an uncut emerald (beryllium fluid condenser crystal). Metals used are copper, powdered brass, gold and silver. On top are 4 neodymium magnets north side facing up which aids in penetrating the skin to allow the scalar pulse to enter the body more easily. It is connected to a frequency zapper which can also be used independently for zapping and pulses the 30KHZ recommended by Hulda Clark.This device is made to be kept in the pocket to create a zero point bioscalar field around the user acting as an armor of sorts, shielding from EMF, ELF, and transmuting all incoming DOR to POR. Runs off a 9 volt battery and can also be used as a very effective etheric healing tool. Also helps create a positive atmosphere around the user and shield the user from the moods of others. Very light and easy to carry.

2008-02-02T17:58:00.000-08:00

A Brief History of Orgone Research

In the 1930's and 1940's, Dr. Wilhelm Reich was able to detect and measure the existence of etheric (life energy, chi, etc.), which he called orgone, using a modified geiger counter.

Dr. Reich determined that stacking alternating layers of fiberglass (an organic substance) and steel wool (an inorganic substance) would actually attract and collect orgone/etheric energy of both the life-beneficial positive form (which Reich called "OR" or "POR" ) and harmful negative etheric energy ("Deadly Orgone"or "DOR").

He constructed large boxes called orgone accumulators or "Oracs" using this simple layering principle and was able to successfully heal his patients of various ailments, including various forms of cancer, by having them sit inside the box for periods of time.

In 1986, scientists at the University Of Marburg , Germany published the results of a blind study1 which showed that 30-minute orgone accumulator treatments caused consistent, positive psycho-physiological effects not seen with the all-fiberglass box used for a control, stating "the results received in our investigation furnish evidence for the assumption that the physical properties of the orgone accumulator and its psychophysiological efficacy on human organisms, postulated by Reich and his associates, factually exist."

Reich's work was continued in earnest in the 1960's by more open-minded Russian scientists , who also scientifically proved that such unseen energies indeed exist all around us, and who's Reich-inspired work led to the unfortunate development of practical Soviet military defense applications which utilized principles of so-called "Torsion Fields" (e.g., etheric energy). Kozyrev's work, which indeed confirms both Reich's research and our empirical experiences with orgonite, was classified until the fall of the Soviet Union in 1991.

Following in their footsteps, thousands of Ph.D.-level researchers from both sides of the Iron Curtain spanning multiple generations have continued Kozyrev and Reich's pioneering work, slowly forcing mainstream Western science to finally, "officially recognize" the concept of a universal, unseen energy medium they call "dark matter," "vacuum flux" or "zero-point energy," depending on who you ask. It is commonly understood among orgonite enthusiasts that these are all essentially describing the same thing, which Reich called "orgone".
In 2000, researchers discovered that mixing catalyzed organic fiberglass resin with inorganic metal shavings, poured into small molds such as paper cups and muffin pans, would produce a substance which would attract etheric energy similarly to Reich's accumulators. A further step was taken by adding a small quartz crystal to the mixture , for their ability to efficiently collect, transmute and emit etheric energy. This addition to the resin/metal matrix creates a substance which functions as a self-driven, continuously-operating, highly efficient DOR→POR (negative to positive) energy transmutation factory.

When orgonite is within range of a source of DOR/negative energy, it will efficiently and continuously transform it into POR/positive energy as it is being transmitted, which essentially creates positive energy transmitters out of any and all emitters of harmful negative energy, which are totally defenseless against the effect.

The resin in orgonite shrinks during the curing process, permanently squeezing the quartz crystal inside which creates a well-known piezoelectric effect inside the crystal, meaning its end-points become polarized electrically. It is believed this is also what causes the orgonite to function so effectively as a positive energy generator.

Thus orgonite represents a very significant improvement over Reich's early work with orgone accumulators, since Reich's "oracs" attract deadly orgone energy as well as positive and do nothing to transmute it into a purely beneficial form, which orgonite does inherently and continuously.

BAMFx Claudio Scalarizers

2008-02-02T17:05:00.000-08:00

Claudio Scalarizer Modules

BAMFx Scalarizer Page

BAMFx Audio - The Home of Aural Innovations

BAMFx Claudio Scalarizers are our new and specialized devices that are designed to create scalar waves from the signal of an electric guitar, electric bass, or any audio equipment. Small enough to fit into any guitar, bass, effect pedal, preamp, or just about any analog audio instrument or circuitry.

Scalar waves, by nature, contain infinite harmonics. These waves are generated via specially-wound coils inside the device. Attendant harmonics are inserted into the signal path of the electric instrument or audio circuit and manifest themseves as harmonically-related overtones. The net effect of this insertion is that the electric guitar, bass or audio circuit into which the Claudio Scalarizer has been inserted becomes richer-sounding.

The basic action of the Claudio Scalarizer has been found to be portable across all low level analog audio circuitry. Meaning thus, the scalarizer can bring its harmonizing effect to electric guitars and basses, effects pedals, digital multi-fx (by tapping at the analog output), microphones, preamps, guitar amps, tape decks, headphone amps...you name it !

They are so small, they require very little modification to the instrument they are being installed in. Nothing but a minor re-wiring of the instrument is required. They will breathe new life into dull sounding guitars, make cheap sounding axes sound like high-end ones,

Without a doubt, the Claudio Scalarizer is a device whose time has come. It has the power to turn the entire music and audio industry on its ear and challenge many deeply established beliefs about music and audio.

Scalarizer Types

There are four major classifications of Scalarizers, depending on the overall design. These are :

1. Passive Type Scalarizer

Passive Scalarizers feed on the energy of the electric instrument or audio device to generate scalar waves. They require no external power (e.g. batteries) and are very inexpensive and simple to install. They are also the most versatile as they can be easily converted to acoustic scalarizers for use in acoustic instruments, and can be very easily inserted into audio circuitry.

2. Active DuoCore Scalarizers

Active DuoCore Scalarizers feature the same core as passive scalarizers but feature a second scalar-wave generation core which is then powered by a small 3V lithium battery. These Active Scalarizers result in the same general "EQ" of the passive scalarizers but feature more intensified generation of overtones making the tone even more lush and rich.

Active Duocore Scalarizers installed in the output cavity jack of a Squier Stratocaster. Note the CR2032 battery at the bottom of the cavity.

3. Active Buffered Scalarizers

These are scalarizers with built-in unity-gain FET buffers. These are powered by a small 3V Lithium cell. In practice, installing this type of scalarizer "de-loads" the pickups of electric guitars and basses and prevents these from being weighed down by the instrument cable and amplifier input. This allows the true tone of the instrument to come out, and is then made even richer with the built-in scalarizer core.

4. Acoustic Scalarizers

These are special scalarizers for use in acoustic instruments and speaker systems. Basically they have ceramic transducers that allow them to take the vibrations of a musical instrument and process the signal. These are then brought to the instrument also by way of the ceramic transducer. Acoustic Scalarizers are still under testing and will not be offered to the public at this time.

Scalarizer Core Types

The "core" of a scalarizer is referred to as the assembly of the material on which the scalar coils are wound upon, as well as the scalar coils as well. Varying cores will produce varying equalizations for the instrument to suit the player's tastes.

1. Crystal Core

Crystal Core Scalarizers even out the frequency response of an electric instrument (e.g. guitar, bass) and removes the shrill highs and muddy mids and lows of the instrument. The energy taken from these audio frequencies are then converted to overtones that make the sound richer. Thus it can be said that the Crystal Core Scalarizer has the "flattest" EQ of all Scalarizer core types and yet has the most "crystal" sound. Perfect for Stratocasters and overly-muddy Les Paul type guitars. They are differentiated from the other core types by their two red leads.

Hear a soundclip of a passive crystalcore scalarizer here

2. Metal Core

Metal Core Scalarizers have the same overtone generation capability of Crystal core scalarizers but feature an upper midrange "hump". This characteristic EQ goes very well for some musical genres such as classic rock, progressive rock, heavy metal, country and blues. Usually prescribed for "shredder-type" guitars, but will generally match any other guitar and bring it that punchy, twangy tone loved by many guitarists. They are distinguished by their yellow leads (green leads of unit shown is of a prototype).

Hear a Passive Metalcore Scalarizer here

3. Organic Core

Organicore Scalarizers are the warmest sounding devices in the Scalarizer family. These also generate pleasing overtones but have an emphasis in the lower-mid frequencies. This emphasis gives the organicore the characteristic "warmth" of the device. Perfect for hollow or semi-hollow body electric guitars, microphones, compessors and overdrive pedals and for Jazz, blues and clean-guitar rock. Organicore scalarizers are distinguished by their brown leads. Hear a soundclip of a passive organicore scalarizer here

4. Hydrocore

Hydrocore scalarizers feature swirley, chorus-ey sounds built right inside your guitar. The sound produced by hydrocores can only be characterized as "cool" , "wavy" and swirly. All these while still enriching the sound of the electric instrument with lush overtones. Perfect for certain subgenres of Jazz where a cool sound is desirable. Hydrocore scalarizers are distinguised by their black leads. Hear a soundclip of a passive Hydrocore scalarizer here

5. Firecore

Firecore Scalarizers give the instrument a crunchy, overdriven tone. The sound is akin to plugging a guitar into a transparent overdrive pedal with the gain slightly raised. Thus it is like a permanent overdrive built inside your guitar. Great for guitars that are used exclusively for distorted or overdriven sound. Firecore scalarizers are distinguished by their pink leads. Hear a soundclip of a Firecore scalarizer here

L-R Scalarizer Prototypes : Passive Crystalcore, Passive Metalcore, Acoustic Crystalcore

Specifying Scalarizers

Thus with three general types and five core types, there is a total permutation of 15 scalarizers, with 5 cores for every type. Thus to wit :

1. Passive Crystal Scalarizer
2. Passive Metalcore Scalarizer
3. Passive Organicore Scalarizer
4. Passive Hydrocore Scalarizers
5. Passive Firecore Scalarizers
6. Active Crystal DuoCore Scalarizers
7. Active Metal DuoCore Scalarizers
8. Active Organic DuoCore Scalarizers
9. Active Fire DuoCore Scalarizers (special order only)
10. Active Hydro-DuoCore Scalarizers (special order only)
11. Active Buffered Crystalcore
12. Active Buffered MetalCore
13. Active Buffered Organicore
14. Active Buffered Hydrocore (special order only)
15. Active Buffered Firecore (special order only)

Scalarizer Applications

Scalarizers can be used in any musical instrument or any audio equipment with low-level electrical signals. In these applications, scalarizers will always produce the overtones that they are designed to generate and insert these into the signal path. By design, these devices are meant to pass only low currents.

Thus scalarizers can be inserted in electrical musical instruments, effects processors, microphones, earphones and in the line-level section of audio amplifiers. When installed, scalarizers will imbibe these instruments and equipment with the sparkle and warmth that many musicians and audiophiles long for.

Acoustic Scalarizer installed inside a drum shell

Passive Crystalcore Scalarizer installed in a studio-grade condenser microphone

Scalarizer fitted inside a DS-1 Distortion effects pedal

Passive Crystalcore Scalarizer fitted into a stage microphone

The DYNAMIC ORGONE ACTIVE SHIELD: DORAS

2008-02-02T16:58:00.001-08:00

DORAS

[Above is a photo of the latest update of the DORAS, the DORAS III, with the two low profile slide switches and the output jack; also shown is one of the new 220 mAH NiMH rechargeable 9 volt sized batteries that are now available for use in the DORAS

FEATURES

Custom Internal P.C board; efficient solid state CMOS IC design; under 10mA current consumption in the 'Active' mode; (more when driving an external device.)

Two Frequencies selectable: 15.2 Hz and 31.7 Hz; Center position of switch = OFF

Two Internal multi-turn trimmers used for frequency calibration; can be recalibrated in the future if & when this is desired.

Special "Smooth Energy" Design Mobius Coil, wrapped around a Double Terminated Quartz Crystal, Pulsed at the selected frequency

Blue Light Pulsed into base of Quartz Crystal, pulsed at the same frequency as the Mobius Coil

"View Port" allows you to see the light pulsing through the Internal Quartz Crystal, as an "ON" Indicator

Sliding compartment lid on the lower back allows for quick battery changing; Uses one standard or rechargable 9 volt sized battery

Low Battery LED Indicator on end panel lets you know when it's time to replace or recharge the battery

Internal circuitry runs at an internally requlated supply voltage for operational stability

Compact shirt pocket sized case: 2-3/8" wide, 1" thick, 3-3/4" tall; (toggle switch handle extends another 1/2")

Weight, with battery installed: around 6-1/2 ounces

You can turn it on into the "ACTIVE" mode by feel to either of the available frequencies, without ever taking it out of your pocket, etc.

"ORGONITE" energy generator / transformer core includes a special Sterling Silver Double Helix Coil with three Strerling Silver beads soldered in place; plus a geometrical array of over 30 specially selected items, including Herkamer Diamonds, Citrine and Amethyst crystal points, Natural Almandine Garnets, Topaz, Lapis, Rose Quartz, Calcite crystals, and Hematite. These are embedded in a mix of organic resins and natural crystalline metallic materials including Iron Pyrite, Argentite, Sphalerite, and Galena, as well as other materials.

On 9-26-2002, I'd written most of the following introduction:

Friends,

I've been testing the first prototype of this shirt pocket sized device myself for many weeks now; I've only spoken of it with a couple of people in private conversations. I wanted to thoroughly test it on myself first... and the results are very promising, indeed!

The device is about the size of a pack of cigarettes, and is powered by a 9 volt battery that's easily changed out. I run mine with a pair of the 9V size NiMH 150maH rechargable batteries, which should give quite a bit of "Active Mode" operating time between recharges- maybe 15 hours or more of continuous operation, based on recent tests. I usually don't keep it on continuously for that long at a time! With two or three of these rechargable batteries and a charger, all available at your local WalMart as well as from many other sources, a DORAS user should be well set for extended ventures.

Technical Note: Pulsing the blue light through the crystal takes a fair percentage of the power drawn from the battery, but my impression is that is adds another dimension to DORAS's dynamics; it's what I think of as a 'good trade'!

There's a "Low Battery" indicator on the end panel of DORAS, to let you know when it's time to swap out (or recharge) the battery. The internal voltage regulation aspect of the custom circuitry provides stable operation throughout the battery charge life, until the battery discharges below the level where the 'recharge / replace' LED indicator comes on.

There's a specialized "Smooth Energy" Mobius Coil I form, wrapped around a nice, clear D.T. quartz crystal, which is pulsed at either of two frequencies. But I also pulse blue light into the base of the quartz crystal at the same frequency simultaneously. [Mobius Coils are said by some to primarily produce Scalar Waves, more so than conventional EM waves. I'd suggest doing a search on GOOGLE on the topic if you're interested in the variety of information available on the web.]

When switched on & running one of the two frequencies, the pulsing blue light (and the tip of the quartz crystal) is visible through a 'view port' ; you can of course use this simply as an 'on' indicator. Some might even decide to use DORAS as a type of compact psionic projector, pointing the crystal as they are guided while directing their intention with the energy from the device. The 15.2 Hz frequency might generally be the most suitable for this type of use as an 'intention driver', (although some users report using both frequencies for this purpose.) I'll leave this to you, to work with as you are guided. As with all 'active mode' psionic devices, your visualizations and intentions are a dynamic aspect of the use of such a device.

Again, I'd suggest a search on the subject of "PSIONIC" and "PSYCHOTRONIC" devices on GOOGLE for those interested in further information. (The books of Michael G. Smith will also likely be of interest; while they're now out of print, Amazon.com does offer connections for buying used copies. His most recent book, "Crystal Vision" might be a good one to locate.)

The circuitry module and main Mobius Coil Wrapped Crystal fit closely over and are partially embedded within a specially made "orgonite" assemblage, which includes a silver double helix coil with 3 silver beads (on the same surface as the battery door- I like this side towards my body!), and several small Herkamer Diamonds, as well as several Almandine Garnets, Amethyst & Citrine points, Hematite, Rose Quartz, Lapis, and Topaz, all embedded in a matrix of Pyrite, Argentite, Sphalerite, and Galena in an energetic matrix of organic resins.

I use two frequencies, closely calibrated with multi-turn precision trimmers; 15.2 Hz and 31.7 Hz.

The 15 hz / 15.2 Hz has been tallked about by many as a protective resonance against adverse psychic influences, as well as an 'intention driver' resonance. (I won't go into further detail at this time.)

The 31.7 Hz is amazing in how it seems to strengthen the body's energy field in the presence of EMF / RF fields. I built the first one to help me deal with the pulsed magnetic fields from the 60 Hz that permeates our environment these days, including the pulsed magnetic fields from flourescent lighting. But I'm now understanding that this device, running this frequency, can do a lot more than this, to help reinforce the body's energy field when exposed to a wide specrtum of frequencies / fields that otherwise have an adverse effect on us. As always, our intention in using such a device can play an important part.

Another anecdotal reaction to a first encounter using the DORAS: I handed my first DORAS prototype, running the 31.7 Hz resonance at the moment, to a very energy sensitive friend who was working at the time in the "Earth Love Gallery". This is a shop filled with fabulous mineral / crystal specimens on the west edge of Denver, which unfortunately is in a commercial space which has recessed flourescent lighting overhead. She immediately said, "Wow- I just felt my energy field go out to here!" gesturing with her hands out to a couple feet on either side of her body.

After the Orgonite core is created, each DORAS is 'activated' and 'charged', and then 'harmonized' by my own processes. The DORAS can also be carried and used in a 'Passive Mode', without being turned on; it's already running a lot of energy into your body's energy field in this 'passive' mode. (I come up with a Bovis Unit reading of 16,300 in the passive mode- quite substantial for a compact shirt pocket sized device.)

But when it's turned on in the 'Active mode' on either of these frequencies, my impression is that it multiplies it's potential influences dynamicly beyond any comparably sized 'Passive Mode' device out there. The "Active Mode" Bovis Unit reading jumps to 19,700, from the testing I have done on one recently completed device. The Bovis Unit reading can't begin to tell the whole story when we get into active energy dynamics and synergy- especially when we begin to deal with actively driven frequencies and possible scalar wave aspects; it's still just one evaluation technique I find useful.

Personal reactions and impressions from my 'energy sensitive' friends has been very positive; when more sensitive individuals have had a chance to experience DORAS, I'll hopefully be able to share some of their specific impressions and experiences with you.

Since I've made the first one that I've now used for several weeks, DORAS has become one of my favorite traveling companions! {grin}

Now that I've used it myself for quite a while, I'm ready to offer this experimental device to others. I can really make no claims as to how anyone might be able to employ DORAS; I leave that up to the individual.

Subject: DORAS unit : Report Date: Wed, 30 Oct 2002

I asked one individual to share his impressions of the DORAS; here's the message I received.

Yes, I've been carrying it for several days. In fact I got a distinct 'tingling' sensation just by picking up the package at the post office even before opening it.

Nice energy, definitely more refined that the orgone zapper -- which I still like very much by the way, only now I'll be a little more free with loaning that out! Definitely 'happening' all over the subtle levels as well. While wearing it in active mode (either frequency), I find it's much easier for me to 'visualize' sending someone / something a needed 'orgone bath' (same technique Don describes), and the vividness of the visualization is much more vibrant -- like the quality of intent is 'purer' (probably due to lack of outside interference in active mode).

Have had it present during one gifting excursion, but since this was not a large excursion I can't report anything definitive except that I noticed virtually none of the 'typical' stress one might experience during the same.

One 'technique' which has made itself evident to me since wearing the doras is the 'orgone scan' : 'seeing' a building, room, or other such vessel as having a nice, vibrant flat blue 'plane' of pure orgone pass vertically through the area in an effort to detect potential sources of psychic interference. This works as a preventive measure too, since said area has just received a nice orgone bath and so visualization of a nifty blue orgone bubble encompassing said area is second nature at that point.

[Earlier, before receiving the doras as I was developing this scanning technique during one of the first attempts, I intentionally 'bathed' a spewplane during mid-trail. Within 5 seconds the trail ceased, within 15 seconds the visible trail began vanishing (as I had extended the visualization to encompass that remnant activity). Within 3 minutes, the entire sky trail was all but invisible. Within approximately 7 minutes, I saw one of the ubiquitous 'black helicopters' being dispatched to the exact area where I had performed said visualization — since I was on the road when this occurred, I was able to see all of this is real time. Quite the 'circus' it was, but also nice confirmation of the power of simple intent.]

I'm sure I'll have more to report soon. So far, I'm very pleased. Brought the unit over to a sensitive friend last night. She'd been recovering from a heavy flu (for which I lent her my Zapper) and so being sense-dulled she wasn't as 'sensitive' as normal, but once the unit switched on she said 'wow', felt it in her chest and heart chakra right away, not unpleasant at all. For reference, she trends toward clairsentience, while I generally trend toward clairaudience and delayed cognition though I appear to receive a great deal of sense information through my palms.

Let's keep in touch. I'll keep you posted as I can and thanks for taking the time out of your busy life to develop this amazing little device.

djembemon

On 9-12-2005, another DORAS user writes:

I purchased a DORAS from you about a year ago. Among the thirty or so Orgone genrating devices I own, it is my favorite for it's compactness, palpable action, and price. I have recomended you highly on the Xtrememind.com forum where most Orgone producing Manufactureres and users speak out on issues regarding Orgone, scalalr Wave Tech and manifesting etc.

R.M.

Detox foot patches: Tourmaline

2008-02-02T00:36:00.003-08:00

Kinoki TV Infomercial Tatics Revealed.

What about the Kinoki "free pads for life" offer? Who are they trying to fool? Paying $12.95 for shipping and handling each and every month to get only 10 patches is not exactly free. We will never enroll you in an auto ship program, which Kinoki users tell us may take months to cancel. You decide when and how many patches you want to purchase.

PRODUCT INFORMATION

Detox foot patches are the rage of Asia with over 18 million patches sold every month. Now, you can purchase this amazing product in the US under the brand name Detoxion (pronounced: De-tox-e-on). Detoxion is an all natural patch that amazingly extracts heavy metals and other forms of toxins from your system while you sleep. It took Japanese scientists over 24 years to develop this technology. Registered with the US FDA, Detoxion is safe, effective and simple to use.

How does it work? Basically, Detoxion provides a “One-Two punch”. First, it contains Tourmaline which is a mineral found in Brazil. Tourmaline possesses a unique property of emitting far infrared rays FIR which generates negative ions. Negative ions are known for having a soothing therapeutic effect on your body. That’s why people feel so relaxed after a rain storm or being next to a waterfall. When worn on your foot, the negative ions stimulate acupressure meridian points for various vital organs which promote improved circulation and detoxification activity. A side benefit many people report is that Detoxion helps them get a deep relaxing sleep.

Second, Detoxion contains a vinegar essence from Bamboo trees. Chinese villagers have known for thousands of years that tree sap make a potent topical salve for treating infections and irritations. Scientists have discovered that a highly processed formulation of these ingredients has an amazing ability to absorb toxins right through your skin. Detoxion uses only the finest sap from Bamboo tress, not the cheaper less effective sap from oak, beech with sakura filling. Add chitosan, pearl stone, highly purified silica, polyolic alcohol and starch and you have and you have a powerful synergistic detoxification product. Detoxion will detoxify your system, restore balance to your nervous system, boost immunity, improve metabolism and circulation and assist your body in healing its self.

Detoxion may be applied to many parts of the body but you will receive the most dramatic results by applying them to the soles of your feet. Why? According to Chinese medical knowledge, our body has over 60 reflexology meridian points on the soles of the foot. Known as the “second heart”, they are the reflective zones of our major internal organs. And, because gravity and your body’s own natural defense system which moves toxins away from vital organs, your feet become a “storage pit” for heavy metals and toxins.

The true test is just to try them. Before going to bed, simply apply a Detoxion Patch to the soles of your feet using the enclosed adhesive tape. Then, wear a sox over it and keep it on over night. In the morning you will be see significant changes to the smell and color of the patch as it reflects the amount and degree of toxins which were extracted from the body.

Moebius Transformations Revealed

2008-01-20T15:03:00.000-08:00

Mobius Coil, Crystal Orgone Orgonite

2008-01-20T14:59:00.001-08:00

How is MRET water different from magnetized and cellular waters?

2008-01-14T13:01:00.000-08:00

How is MRET water different from magnetized and cellular waters?

Cellular water has organized structure that depends on the structure of biological macromolecules since water molecules have tendency to be attracted to macromolecules. For example, there is water with specially organized structure around the DNA macromolecules. Cellular water can retain its structure when water molecules are located around the surface of biological macromolecules within long period of time.

Magnetized water is a result of the effect of steady magnetic field on foreign substances in water that have mostly paramagnetic properties. This process can create certain clusters of paramagnetic substances in water and affect water molecules as well.

MRET water is a result of the effect of oscillating resonance magnetic field of specific frequency on molecular structure of water. There is a process of resonance excitation of water molecules there. This process is related with quantum transitions in clathrate microcavities that are non-linier, multi frequent process. MRET water can be in activated state for a long period of time. It has more informative property such as changed dielectric permittivity, viscosity, etc.

Is it possible to reduce the time of MRET resonance from the current 30 minutes?

Based on experiments 30 minutes found to be most optimum time for activation.

It is known that water has instable structure in itself. Is it possible for MRET water to maintain its effects as the same even after boiling or freezing it?

It is possible to assume that boiling of MRET water can affect properties of activated water as a result of destruction of hydrogen bonding at high temperature. On the contrary, the freezing of MRET water will enhance its properties.

How is hot MRET water different from cold MRET water?

According to the general concept of thermodynamics heating process leads to relaxation of any system into the thermodynamic equilibrium state. MRET water activation process is a process of creation of specific molecular structure in the body of water. The heating process may affect specially organized molecular structure and lead to dissociation of hydrogen bonding in water. It may reduce the level of MRET water activated state; however activation of molecular structure will be kept in water for long period of time. In case of cold MRET water there is no destruction of hydrogen bonding and reduction of activation as well.

How are therapeutic frequencies transmitted in water?

Quantum electrodynamics calls for the existence of long-range electromagnetic fields that can be transmitted by large coherent domains existing in water (E. Del Giudice and E. Preparata, Journal of Biological Physics, vol. 20, p. 105, 1994). These long-range electromagnetic fields may transmit electromagnetic signals from molecules, thus generating specific attraction between molecules with matching spectra, excluding non-resonating, unwanted random events.

What is the mechanism that makes MRET water antiviral, antibacterial, antifungal and mutation suppressive?

This mechanism requires additional studies. Activated water has positive effect on self reparation process in case of signal and double-strand brakes in DNA structure that leads to suppression of mutation in the cells. It can also enhance function of immune system in the body. The proposed mechanism can be explained based on the fundamental law of physics. Taking into consideration that three dimensional structures of RNA molecules is specific and essential for each type of molecular complexes such as viruses, bacteria and other types of cells, it is possible to assume that the influence of the molecular structure of specific RNA polymers with subtle electromagnetic signals imprinted into the body of MRET water may lead to association or disintegration of RNA molecular structures, and as a result make possible to control mentioned above targeted molecular complexes such as viruses.

There are a number of studies which show that the genetic macromolecules exposed to a variety of chemical and physical agents, including specific electromagnetic signals, can develop structural damages. Structural damages interfere with RNA replication and transcription, and thus can lead to the loss and distortion of information stored in RNA molecules. Biological consequences of such damage include the brake in the replication cycle of viruses, and eventually their death.

Could you explain how it is possible that MRET changes water molecular structure and maintains the change for a long time in a stable way?

There is developed a possible method of 'imprinting' of information into the molecular structure of water. This method is a result of controlled changes in equilibrium state of clathrate and amorphous molecular structures of water. These changes lead to certain quantum transition of water molecules inside the microcavites of clathrate structures. At certain condition these changes can be very stable for long period of time.

How does MRET water strengthen the signal transduction between cells?

The process of cellular signal transduction is based on the propagation of electromagnetic waves. MRET water has optimum physical characteristics such as viscosity, dielectric permittivity which can enhance the process of signal transduction between the cells.

How does MRET water improve cellular hydration?

MRET treatment of water can change amount of amorphous water molecules. It leads to enhancement of intracellular mechanism related to salt component in water because amorphous molecules have lower viscosity.

How is MRET different from nano technology?

MRET can be considered as a nanotechnology process. The difference is that most of the known nanotechnology processes are based on solid silicon material. MRET process is applicable to liquid substances such as water.

Spring water with any possible benefits is spoiled in 2-3 days at normal temperature. In contrast, MRET water shall not be spoiled for 1.5-2 years and how is this possible?

The organization state of molecular structure of spring water is a result of specific underground conditions such as temperature, pressure, etc. The molecular structure of spring water goes through relaxation process that leads to the lost of benefits under normal temperature and pressure. The specific molecular structure of MRET water is created under influence of Resonance Electromagnetic field when temperature and pressure is normal. That is why stability of MRET water is more profound.

Is there any research being carried out regarding effects of MRET on human body? Could you explain the mechanism of MRET regarding cancer suppression and white blood cell growth?

Refer to Q6.

Is it possible to maximize the polymer size? In other words, is it possible to resonate water in a massive amount?

It is possible to treat larger volume of water with MRET device. In this case device should have different characteristics of the magnetic power and the polymer size.

Why are the effects of MRET water shown far better in distilled water rather than regular or mineral water?

The effect of MRET water is related to the resonance transition of water molecules in the structure of hydrogen bonds. There are a number of foreign substances in mineral and regular water. These foreign substances can deform the clathrate structure of water molecules and prevent normal process of activation. It is possible to assume that foreign materials in water can affect the process of molecular resonance effect treatment of water.

How long can the MRET water in human body maintain its effects after drinking?

The effect of MRET water in the human body very much depends on the mineral content of water and some other physical parameters. According to experimental data and the results of preliminary theoretical calculations this effect can last more than 24 hours after drinking of MRET water.

Different individuals have different physical conditions. How does this relate to the effects of MRET water?

The effect of MRET water depends on the physical conditions of individuals. For example, some individuals feel ‘energetic’ effect of MRET water faster to compare with other individuals. The mechanism of this phenomenon requires additional study and clinical research.

Different individuals have differences in characteristics of their cellular water. Is it reasonable to translate this to different responses in different individuals after drinking MRET water?

Yes it is.

What is the measurement of determining the lifespan of a polymer unit? Is it times of use or period of use?

The life span of MRET polymer material was developed based on experimental work and precise math calculations, based on 10 hours usage per day. In this case it gives customer 7200 hours (2 years) of usage. MRET polymer material is exposed to strong magnetic field and bombardment of photos generated by LED. This process produces certain stress on molecular structure of material. It is called “fatigue of material”. Based on our experience 2 hours or 10 hours of exposure to electromagnetic stress produces approximately the same fatigue effect – this is PHYSICS of MRET process. To avoid any misunderstanding we developed standard life span suggestion for MRET system. That means MRET polymer should be replaced after 2 years of usage.

Have you conducted any animal test with MRET water? If any, were there any changes in shape, for instance, of liver, heart or brain?

We did not conduct any specific tests of MRET water on animals.

MRET water seems to be a magic, not just a kind of water. What would comment on this?

MRET water is not magic water. MRET is a special treatment of water with low frequency electromagnetic signals that can affect molecular structure of water. MRET water can selectively affect and stimulate biological processes in the body.

I’d like materials and treatises published regarding the system that measures activated oxygen (free radicals) neutralization by activated water and actual effects of the measurement method.

The study regarding the effects of activated water on free radicals will be conducted in the near future.

What is the explanation of the white blood cell increase after drinking MRET water? Has there been any treatise publication regarding this?

MRET water has beneficial effect on blood morphology. It was found during the experiments conducted on the patients undergoing chemotherapy treatment at Cedar-Sinai Medical Center in Los Angeles. Another evidence of improvement of blood morphology with MRET water is experiments with Life Blood Cell Analysis. These experiments also show improvement of red blood cells after drinking of MRET water. Thus MRET water has effect of general improvement of blood morphology (optimization of white blood cells as well as red blood cells). It means that MRET water can enhance (optimize) the immune system in the body. These data were published in Explore magazine that presents research materials for Alternative medicine.

If MRET activated water is at above 100c or below 0c, would this affect the long-term memory of the water?

High temperature (boiling) may affect specific structure of MRET water and reduce memory effect. It is very much depend on the time of boiling. If boiling is within short period of time and than rapid cooling of water respectfully, it leads to conservation of specific MRET structure and memory in water. The properties of MRET water are completely safe under influence of low temperature (in some cases for many years).

Would there be any difference between MRET treatment for 30 minutes and for more than 30 minutes?

According to our experimental work there is no significant difference.

The claimed effects and results of clinical studies of MRET water sound almost the same as those of so called “wave-imprinted water” in Korea. Magnetized water achieved, in 2002, Chang Young Shil Award, which is the most authoritative prize for technicians in Korea. How is MRET water different from the wave-imprinted water?

If ‘wave-imprinted ‘ water means magnetized water there is fundamental difference in physical process of modification of molecular structure of MRET and magnetized water. Magnetized water is a result of affect of steady magnetic field on foreign particles in water which have mostly paramagnetic properties. Under the influence of magnetic field these particles can form clusters which are not very stable. These clusters can attract water molecules and temporary influence property of water.

On the contrary, MRET treatment affect directly water molecules with the help of oscillating resonance electromagnetic fields. These low frequency oscillations can affect harmonic oscillations of protons in the lattice of hydrogen bonding of water. It leads to redistribution of number of vacant and occupied clathrate structures in water. This modification process can change physical properties of water (dielectric permittivity, viscosity, etc.) and keep these changes for a very long period of time.

Has there been any test conducted on regular cells and cancerous cells? If so, what were the results?

MRET activation leads to modification of physical and molecular properties of water such as dielectric permittivity, conductivity, etc. This type of water can influence the process of cellular signal transduction and self recognition of the cells since this process is based on the effects of Van Der Waals electrostatic forces of attraction in the deformed cells. The same effect has place when DNA has double strand brakeage between nucleotides.

It is very possible that activated water can support the process of self recognition of the cells (recognition of normal cells and cancer cells in the body) which is impossible in normal not activated water. The effect of MRET water on cancer cells was studied at laboratory of Engene Biotechnologies Corp., San Diego. Research show that activated water has tendency to suppress life activity of cancer cells and produce no harmful effect on normal cells. Research materials were published in Explore magazine and Electric Space Craft Journal.

Is it possible for human to benefit the same from plants grown with MRET water?

MRET water enhances plants growth by stimulation of function of normal cells which does not mean that cells grow “bigger”. It is possible to assume that activated water helps normal cells to go through replication and transcription cycle faster and provide optimum environment for cellular metabolism. MRET water can provide “rejuvenation” process for cells in human body. The mechanism of the effect requires further research.

According to a research conducted in Japan by a Japanese doctor named Niwa Yukei, the structure of water is broken after magnetizing and its effects get worse than its initial state (before magnetizing). Are there any researches conducted regarding magnetized water in other countries, including Russia?

How do Russian scientists and other academic communities see magnetized water, its structural change and magnetic field? For instance, how do they see structural change of water and magnetic field; and structural changes caused by applying a magnetic field?

The steady magnetic field affects paramagnetic particles in the molecular structure of water. These particles can be formed in clusters under the influence of magnetic field. These clusters are not stable and usually go through relaxation process within short period of time.

What is the difference between water whose energy level was enhanced by applying magnetic field and water whose energy level was enhanced in MRET?

Same as Q1.

Life span of hydrogen bond is just several picosecond. How long does the clathrate frame exist?

If it does not last long, potential energy of microcavity cannot be high. According to Pauling model (1959) clathrate structures can exist in water for a very long period of time (several months). Clahtrate microcavities in structured water have tendency to bond water molecules stronger to compare with regular not structured water. The existence of the stable clahtrate structures in water can be proved by existence of special type of ice (ice-6 and ice-7) which melts only at the temperature of 80° C.

Is it vacant inside the clathrate frame?

Yes, it is vacant inside microcavity if it is not occupied by molecules of gas dissolved in water. This microcavity can be described as the three dimensional (3D) potential whole with volume of less than 5A.

You described that at 4?C, 18% of all microcavities are occupied, but at body temperature, 38% of microcavities are occupied. Then the density of water should be higher at 4°C.

There are three main reasons of the density change of usual (not activated) water. • The total density of water depends on a temperature-dependent ratio between structured and amorphous water. • The total density of water depends on the phenomenon of volume increasing of amorphous water at heating (as a result of increasing of vibration amplitude of water molecules) • The total density of water depends on temperature-dependent population of microcavities of clathrate frame of structured water. • In a result the density of water is maximum at 4°C.

When water was obtained by rapid heating, it will have an excess of both amorphous water and vacant micro cavities. You described that such water will have a lower volume density, and significantly lessen the burden on the heart and other organ. Are you saying this amorphous water is good water? Does amorphous water increase the DNA repairing ability?

The increase of number of amorphous molecules with lower viscosity leads to the rapid transportation of microelements and salts in the body liquids. On the other hand, it may lead to increase of free radicals in the body. This question requires further investigation.

Then what is the structured water and activated water? Which one is good one? Which side is MRET?

Structured water has normal state of equilibrium of clathrate and amorphous components in water under certain temperature. Activated water means structured water which does not have the equilibrium of components under certain temperature. Activated water may differ from structured water by other physical properties (dielectric permittivity, viscosity, etc.) and by the ratio of clathrate and amorphous molecular structures in water.

Can hydrated electron be stable in water?

No, they can not be stable. The average life time of hydrated electrons in distilled water is about 0.001 second. Than they go through recombination process and new ones appear in water. The reason for existence of hydrated electrons may be effect of radiation (for example the radiation of isotope K-40 in human skeleton) It is so called the process of “radiolysis”. Another reason may be electrolyte dissociation of water molecules or thermo stimulated hydrolysis of molecules in water.

How could water as a liquid state be seen in dark field microscope? I cannot understand.

Darkfield microscopy relies on a different illumination system. Rather than illuminating the sample with a filled cone of light, the condenser is designed to form a hollow cone of light. The light at the apex of the cone is focused at the plane of the specimen; as this light moves past the specimen plane it spreads again into a hollow cone. The objective lens sits in the dark hollow of this cone; although the light travels around and past the objective lens, no rays enter it.

The entire field appears dark when there is no sample on the microscope stage; thus the name darkfield microscopy. When a sample is on the stage, the light at the apex of the cone strikes it. The image is made only by those rays scattered by the sample and captured in the objective lens. The image appears bright against the dark background. This situation can be compared to the glittery appearance of dust particles in a dark room illuminated by strong shafts of light coming in through a side window. The dust particles are very small, but are easily seen when they scatter the light rays.

This is the working principle of darkfield microscopy and explains how the image of low contrast material is created: an object will be seen against a dark background if it scatters light which is captured with the proper device such as an objective lens. The image of molecular clusters in the samples of liquid water can be seen at the magnification of 4000x.

How could the hardness of water decreased? Does it mean the total amount of calcium and magnesium was decreased?

Yes, the total amount of calcium and magnesium was decreased. The experiment also showed that turbidity of water increased at the same time. Thus it possible to assume that certain amount of calcium and magnesium ions were bound with hydroxyl groups and developed components in form of the sediment in activated water.

Does NMR experiment mean that MRET water is very structured (immobile)?

NMR experiment means that proton dispersion increased after activation process. Another word MRET treatment enhanced proton activity in water.

How do you know the molecular angle of water was increased to 114°?

This mechanism is based on the idea that amorphous molecules should get extra energy to enhance harmonic oscillation of protons in water molecules in order to penetrate through the small size ‘windows’ in clathrate structure of water. Obviously this additional portion of energy will increase proton oscillation and the angle of hydrogen bonding. 114° is approximation data which can be calculated based on the mathematical equations designed to find precise amount of quantum of energy necessary to increase proton oscillations.

How could the water preserve the very concrete information like molecular structure in Benveniste’ experiment? (not just the effect of conductivity, or solubility induced by magnet treatment)

The examined features of spatial water structure show that water molecules are always distributed between two loosely connected systems: the quasi amorphous non-structured water and the quasi crystalline structured system of clathrate hydrates. During the process of external influence onwater (i.e. water activation) there is a significant change of its structure and parameters. Proceeding from the scale and mechanism of activation it is possible to single out two different hierarchical levels of organization for water structure (the macro level and the micro level).

The first hierarchical level (macro level) of water structure relates to the global spatial structure of water and determines the shape and location of its spatial frame. This level is characterized by the presence of a system of clathrate hydrates, which form stable dodecahedronic polyhedrons from ions of oxygen and hydrogen. Inside the volume of each of these polyhedrons there are void micro cavities with solid walls. With the help of stable hydrogen links dodecahedronic polyhedrons are connected into associates, which may be united into large associates (macro clusters).

In the space between the macro clusters there is quasi-amorphous water. Therefore, the macro level of structural organization of water corresponds to a balanced distribution between the amorphous water phase and another phase of water, represented as a system of macro clusters. With an impact of external parameters this distribution may change.

For example, with lower temperatures the volume of macro clusters increases while the volume of quasi-amorphous water decreases. With growing temperatures the volume of macro clusters is reduced and, above that, each one of them may be divided into several smaller parts. Meanwhile, the volume of quasi-amorphous water, naturally, increases. The same changes may take place during other types of influences (for example, under the effect of ultrasound on water environment).

Due to a strong dependency from external influences the macro level of water structure is not efficient enough for sustaining a system of water memory, resistant to external destructive influences. Meanwhile, it is obvious that in the absence of very strong destructive influences the process of recording of information in the form of a system of specifically arranged clathrate cells are quite possible. Simply stating, separate polyhedrons of the clathrate frame may be connected with each other by several alternative ways.

One important aspect here is that realization of a definite orientation of a specific pair of polyhedrons automatically leads to the outcome when subsequent polyhedrons would be attached to that “leading” associate in the same way that causes the appearance of ordered macro clusters. Such system has a definite structure, which can explain the possibility of global structuring of large volumes of water. The other hierarchical level (micro level) of the water structure is related to processes of movement and distribution of separate water molecules between micro cavities of the spatial clathrate water frame and quasi-amorphous non-structured water. That micro level determines non-stationary evolution of water molecules.

The process of evolution is determined by two possible directions: molecules can leave the volume of quasi-amorphous water, penetrate the volume of these micro cavities and stay there for a long time in hydrophobic form, or, to the opposite, transfer from micro cavities into the volume of quasi-amorphous water. It is absolutely clear that the micro level of water structure is distinguished by a much greater stability with respect to effects of external destructive factors than the macro level. With all external transformations of the clathrate frame typical for the macro level, hydrophobic water molecules remain in a stable state in the volume of micro cavities. Such stability makes the micro level of water structure an effective object for organization of a system of water memory.

How is MRET activated water compared to human body's structured water? (according to presentations, activated water is "same" as body's structured water).

Cellular water in the body has "in general" complex structure based on clustrate organization of molecules. There is no just "one" type of cellular water for everybody. The same body has about 9 different types of cellular waters which depend on the location of the cells and organs in the body. Cellular/structured water also dramatically changes depending on the environmental input, diet, water source , etc. The statement MRET water resembles cellular water based on complex clustrate structure of both MRET and cellular water. MRET treatment of water can change amount of amorphous water molecules. It leads to enhancement of intracellular mechanism related to salt component in water because amorphous molecules have lower viscosity.

How is the angle of the hydrogen bond measured? 104.5 to 114.5 degree.

In theory hydrogen bond angle in water molecules is 104.5°. Experimental work and mathematical calculations provide result of 109°. It happens because of the consistent proton harmonic oscillation in water molecules. Based on the Pauling model of clathrate structures it was developed theory of physical mechanism of water ‘memory’. This mechanism is based on the idea that amorphous molecules should get extra energy to enhance harmonic oscillation of protons in water molecules in order to penetrate through the small size ‘windows’ in clathrate structure of water. Obviously this additional portion of energy will increase proton oscillation and the angle of hydrogen bonding. 114° is approximation data which can be calculated based on the mathematical equations designed to find precise amount of quantum of energy necessary to increase proton oscillations.

Any document to show body's structured water is 114.5 degree?

There are no documents to state that structured water in the body has 114.5 degree. It is theoretical approximation.

Another aggressive brand in Thailand called Cosmic Water (Taiwanese) claimed that theirs is 103.5 degree, therefore smaller in hydrogen bond size which means better cluster to hydrate cells. I checked the US patent, its magnetic treatment for enhancement of taste, no energized water claim.